EN 10163-3:1991
(Main)Delivery requirements for surface condition of hot rolled steel plates and sections - Part 3: Sections
Delivery requirements for surface condition of hot rolled steel plates and sections - Part 3: Sections
This part 3 in addition to part 1 specifies the general delivery requirements for surface condition of sections to which the EURONORMS mentioned in clause 2 apply and applies to all surfaces excluding edges.
Lieferbedingungen für die Oberflächenbeschaffenheit von warmgewalzten Blech, Breitflachstahl und Profile von Stahl - Teil 3: Profile
Dieser Teil 3 enthält in Verbindung mit Teil 1 die Lieferbedingungen für die Oberflächenbeschaffenheit von Profilen nach den in Abschnitt 2 genannten EURONORMEN und gilt für alle Oberflächen mit Ausnahme der Profilkanten.
Conditions de livraison relatives à l'état de surface des tôles, larges plats et profilés en acier laminés à chaud - Partie 3: Profils
La présente troisième partie complète la première partie en indiquant les prescription de qualité de surface des profilés auxquels s'appliquent les EURONORM mentionés au chapitre 2 et s'appliquent à toutes les surfaces, à l'exclusion des rives.
Dobavni pogoji za videz površine vroče valjane pločevine, ploščatega jekla in profilov - 3. del: Profili
General Information
- Status
- Withdrawn
- Publication Date
- 20-Aug-1991
- Withdrawal Date
- 07-Dec-2004
- Technical Committee
- ECISS/TC 103 - Structural steels other than reinforcements
- Drafting Committee
- ECISS/TC 10 - Structural steels - Qualities
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 08-Dec-2004
- Completion Date
- 08-Dec-2004
- Directive
- 97/23/EC - Pressure equipment
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 10163-3:1991 is a standard published by the European Committee for Standardization (CEN). Its full title is "Delivery requirements for surface condition of hot rolled steel plates and sections - Part 3: Sections". This standard covers: This part 3 in addition to part 1 specifies the general delivery requirements for surface condition of sections to which the EURONORMS mentioned in clause 2 apply and applies to all surfaces excluding edges.
This part 3 in addition to part 1 specifies the general delivery requirements for surface condition of sections to which the EURONORMS mentioned in clause 2 apply and applies to all surfaces excluding edges.
EN 10163-3:1991 is classified under the following ICS (International Classification for Standards) categories: 77.140.60 - Steel bars and rods; 77.140.70 - Steel profiles. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10163-3:1991 has the following relationships with other standards: It is inter standard links to EN 10163-3:2004. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10163-3:1991 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/071, M/BC/CEN/87/15. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10163-3:1991 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lieferbedingungen für die Oberflächenbeschaffenheit von warmgewalzten Blech, Breitflachstahl und Profile von Stahl - Teil 3: ProfileConditions de livraison relatives a l'état de surface des tôles, larges plats et profilés en acier laminés a chaud - Partie 3: ProfilsDelivery requirements for surface condition of hot rolled steel plates an
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...