EN 1911-3:1998
(Main)Stationary source emissions - Manual method of determination of HCl - Part 3: Absorption solutions analysis and calculation
Stationary source emissions - Manual method of determination of HCl - Part 3: Absorption solutions analysis and calculation
This European standard specifies methods for analysis of chlorides resulting from hydrogen chloride absorption, according to prEN 1911-2, in waste gases having been sampled and filtered according to prEN 1911-1. All compounds which are volatile at the filtration temperature and produce chloride ions upon dissolution during sampling are measured by this method, which gives therefore the volatile inorganic chlorides content of gases expressed as HCl.
Emissionen aus stationären Quellen - Manuelle Methode zur Bestimmung von HCl - Teil 3: Analyse der Absorptionslösungen und Berechnung der Ergebnisse
Diese Europäische Norm legt Verfahren zur Bestimmung der Chlorid- Konzentration in Lösungen, die nach prEN 1911-2 durch Absorption von Chlorwasserstoff aus nach prEN 1911-1 unter definierten Bedingungen angesaugten und filtrierten Abgasproben gewonnen wurden, fest. Alle Verbindungen, die bei der Temperatur des Filters flüchtig sind und bei der Probenahme in der Absorptionslösung Chlorid-Ionen bilden, werden mit dieser Methode erfaßt. Somit wird der Gehalt an flüchtigen anorganischen Chloriden im Abgas, angegeben als Chlorwasserstoff, ermittelt.
Emissions de sources fixes - Méthode manuelle de dosage du HCl - Partie 3: Analyse des solutions d'absorption et calculs
La présente norme européenne spécifie une méthode d'analyse des chlorures résultant de l'absorption de chlorure d'hydrogène, selon le prEN 1911-2, dans les gaz échantillonnés et prétraités selon le prEN 1911-1. Tous les composés qui sont gazeux à la température de filtration et qui libèrent des ions chlorures lors de la dissolution pendant l'échantillonnage sont mesurés par la présente méthode, qui détermine donc la concentration en chlorures inorganiques gazeux, exprimée en HCl. Dans la plupart des cas, ceci correspond à la concentration de chlorure d'hydrogène.
Emisije nepremičnih virov - Ročna metoda določevanja HCl - 3. del: Analiza absopcijskih raztopin in izračun koncentracij plinov
General Information
- Status
- Withdrawn
- Publication Date
- 21-Apr-1998
- Withdrawal Date
- 10-Aug-2010
- Technical Committee
- CEN/TC 264 - Air quality
- Drafting Committee
- CEN/TC 264/WG 3 - HCl Emission - manual method
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 11-Aug-2010
- Completion Date
- 11-Aug-2010
- Directive
- 01/997 - Incineration of waste
- Directive
- 2001/997 - Incineration of waste
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
NSF International
Global independent organization facilitating standards development and certification.
CIS Institut d.o.o.
Personal Protective Equipment (PPE) certification body. Notified Body NB-2890 for EU Regulation 2016/425 PPE.
Kiwa BDA Testing
Building and construction product certification.
Sponsored listings
Frequently Asked Questions
EN 1911-3:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Stationary source emissions - Manual method of determination of HCl - Part 3: Absorption solutions analysis and calculation". This standard covers: This European standard specifies methods for analysis of chlorides resulting from hydrogen chloride absorption, according to prEN 1911-2, in waste gases having been sampled and filtered according to prEN 1911-1. All compounds which are volatile at the filtration temperature and produce chloride ions upon dissolution during sampling are measured by this method, which gives therefore the volatile inorganic chlorides content of gases expressed as HCl.
This European standard specifies methods for analysis of chlorides resulting from hydrogen chloride absorption, according to prEN 1911-2, in waste gases having been sampled and filtered according to prEN 1911-1. All compounds which are volatile at the filtration temperature and produce chloride ions upon dissolution during sampling are measured by this method, which gives therefore the volatile inorganic chlorides content of gases expressed as HCl.
EN 1911-3:1998 is classified under the following ICS (International Classification for Standards) categories: 13.040.40 - Stationary source emissions. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1911-3:1998 has the following relationships with other standards: It is inter standard links to EN 1911:2010. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1911-3:1998 is associated with the following European legislation: EU Directives/Regulations: 01/997, 2001/997, 89/369/EEC, 89/429/EEC, 94/67/EC; Standardization Mandates: M/BC/CEN/91/14. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1911-3:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-1999
(PLVLMHQHSUHPLþQLKYLURY5RþQDPHWRGDGRORþHYDQMD+&OGHO $QDOL]D
DEVRSFLMVNLKUD]WRSLQLQL]UDþXQNRQFHQWUDFLMSOLQRY
Stationary source emissions - Manual method of determination of HCl - Part 3:
Absorption solutions analysis and calculation
Emissionen aus stationären Quellen - Manuelle Methode zur Bestimmung von HCl - Teil
3: Analyse der Absorptionslösungen und Berechnung
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...