EN ISO 11680-1:2011
(Main)Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2011)
Machinery for forestry - Safety requirements and testing for pole-mounted powered pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:2011)
ISO 11680-1:2011 gives safety requirements and measures for their verification for the design and construction of portable, hand-held, pole-mounted powered pruners having an integral combustion engine as their power unit and using a drive shaft to transmit power to a cutting attachment consisting of a saw chain or a reciprocating or circular saw blade with a 205 mm maximum outside diameter. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified.
ISO 11680-1:2011 deals with all significant hazards, hazardous situations or hazardous events with the exception of electric shock from contact with overhead electric lines (apart from warnings and advice for inclusion in the instruction handbook), relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
Forstmaschinen - Sicherheitstechnische Anforderungen und Prüfung für motorbetriebene Hochentaster - Teil 1: Geräte mit Antrieb durch integrierten Verbrennungsmotor (ISO 11680-1:2011)
Dieser Teil der ISO 11680 gibt sicherheitstechnische Anforderungen und Maßnahmen zur Feststellung deren
Übereinstimmung für die Gestaltung und Konstruktion von tragbaren, Hand gehaltenen Hochentastern mit
integriertem Verbrennungsmotor als Antrieb, die mit einer Antriebswelle zur Kraftübertragung auf die
Schneidgarnitur ausgestattet sind, welche aus einer Sägekette, einem sich hin und her bewegenden
Sägeblatt oder einem Kreissägeblatt mit einem maximalen Außendurchmesser von 205 mm besteht, an.
Methoden zur Vermeidung oder Verminderung der sich aus dem Gebrauch ergebenden Gefährdungen dieser
Maschinen sowie Informationen über sicheres Arbeiten, die vom Hersteller zur Verfügung zu stellen sind,
werden festgelegt.
Dieser Teil der ISO 11680 behandelt alle signifikanten Gefährdungen, Gefährdungssituationen oder
Gefährdungsereignisse für diese Maschinen, mit Ausnahme elektrischer Stöße durch oberirdische
Starkstromleitungen (abgesehen von Warnhinweisen und Hinweisen in der Betriebsanleitung), sofern sie zu
dem vorgesehenen Zweck und bei vernünftigerweise durch den Hersteller vorhersehbarem Missbrauch
eingesetzt werden.
ANMERKUNG Siehe Anhang A zur Liste der signifikanten Gefährdungen.
Dieser Teil der ISO 11680 gilt für tragbare, Hand gehaltene, motorbetriebene Hochentaster, die nach dem
Veröffentlichungsdatum dieser Norm hergestellt worden sind.
Matériel forestier - Exigences de sécurité et essais pour les perches élagueuses à moteur - Partie 1: Machines équipées d'un moteur à combustion interne intégré (ISO 11680-1:2011)
L'ISO 11680-1:2011 spécifie les exigences de sécurité et les mesures pour leur vérification, pour la conception et la construction des perches élagueuses à moteur portatives, tenues à la main, équipées d'un moteur à combustion interne intégré comme source motrice et fonctionnant avec un arbre de transmission pour alimenter le dispositif de coupe consistant en une chaîne de scie, une lame alternative ou une lame de scie circulaire avec un diamètre extérieur maximal de 205 mm. Elle spécifie également des méthodes pour éliminer ou réduire les phénomènes dangereux inhérents à l'utilisation de ces machines, ainsi que le type d'informations sur les pratiques d'utilisation sûres à fournir par le fabricant.
L'ISO 11680-1:2011 traite de tous les phénomènes dangereux significatifs, situations dangereuses et événements dangereux pertinents pour ces machines lorsqu'elles sont utilisées normalement et dans des conditions de mauvais usage raisonnablement prévisibles, à l'exception du choc électrique dû au contact avec des lignes électriques aériennes (en dehors des avertissements et conseils à inclure dans la notice d'instructions).
Gozdarski stroji - Zahteve za varnost in preskušanje motornih žag za obvejevanje z drogom - 1. del: Stroji z integriranim motorjem z notranjim zgorevanjem (ISO 11680-1:201
Ta del standarda ISO 11680 določa varnostne zahteve in ukrepe za njihovo preverjanje za zasnovo in konstrukcijo prenosnih, ročnih motornih žag za obvejevanje z drogom, ki imajo motorje z notranjim izgorevanjem in uporabljajo pogonsko gred za prenos moči do nastavka za rezanje, ki ga sestavlja veriga žage ali premočrtno oziroma krožno rezilo žage z največjim zunanjim premerom 205 mm. Predpisane so metode za odpravljanje ali zmanjšanje tveganj, ki izhajajo iz uporabe teh strojev, in vrsta informacij o varnih delovnih praksah, ki jih mora zagotoviti proizvajalec. Ta del standarda ISO 11680 opisuje vsa večja tveganja, nevarne situacije ali nevarne dogodke v zvezi s temi stroji, razen električnega udara zaradi stika z nadzemnimi električnimi kabli (vsebuje le opozorila in nasvete, ki morajo biti vključeni v priročnik z navodili),kadar se uporabljajo v skladu z njihovim namenom in pod pogoji pričakovane nepravilne uporabe, ki jih določa proizvajalec. Ta del standarda ISO 11680 se uporablja za prenosne, ročne motorne žage za obvejevanje z drogom, izdelane po datumu njegove izdaje.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2012
1DGRPHãþD
SIST EN ISO 11680-1:2001
SIST EN ISO 11680-1:2001/AC:2004
SIST EN ISO 11680-1:2009
Gozdarski stroji - Zahteve za varnost in preskušanje motornih žag za obvejevanje z
drogom - 1. del: Stroji z integriranim motorjem z notranjim zgorevanjem (ISO 11680
-1:201
Machinery for forestry - Safety requirements and testing for pole-mounted powered
pruners - Part 1: Machines fitted with an integral combustion engine (ISO 11680-1:201
Forstmaschinen - Sicherheitstechnische Anforderungen und Prüfung für motorbetriebene
Hochentaster - Teil 1: Geräte mit integriertem Verbrennungsmotor (ISO 11680-1:201
Matériel forestier - Exigences de sécurité et essais pour les perches élagueuses à
moteur - Partie 1: Machines équipées d'un moteur à combustion interne intégré (ISO
11680-1:201
Ta slovenski standard je istoveten z: EN ISO 11680-1:2011
ICS:
65.060.80 Gozdarska oprema Forestry equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 11680-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2011
ICS 65.060.80 Supersedes EN ISO 11680-1:2008
English Version
Machinery for forestry - Safety requirements and testing for pole-
mounted powered pruners - Part 1: Machines fitted with an
integral combustion engine (ISO 11680-1:2011)
Matériel forestier - Exigences de sécurité et essais pour les Forstmaschinen - Sicherheitstechnische Anforderungen
perches élagueuses à moteur - Partie 1: Machines und Prüfung für motorbetriebene Hochentaster - Teil 1:
équipées d'un moteur à combustion interne intégré (ISO Geräte mit Antrieb durch integrierten Verbrennungsmotor
11680-1:2011) (ISO 11680-1:2011)
This European Standard was approved by CEN on 30 November 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11680-1:2011: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC .4
Foreword
This document (EN ISO 11680-1:2011) has been prepared by Technical Committee ISO/TC 23 "Tractors and
machinery for agriculture and forestry" in collaboration with Technical Committee CEN/TC 144 “Tractors and
machinery for agriculture and forestry” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by June 2012, and conflicting national standards shall be withdrawn at
the latest by June 2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11680-1:2008.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive, see informative Annex ZA, which is an integral part of this document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 11680-1:2011 has been approved by CEN as EN ISO 11680-1:2011 without any modification.
Annex ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC
This European Standard has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association to provide one means of conforming to Essential Requirements of
the New Approach Directive 2006/42/EC on machinery.
Once this standard is cited in the Official Journal of the European Union under that Directive and has
been implemented as a national standard in at least one Member State, compliance with the normative
clauses of this standard confers, within the limits of the scope of this standard, a presumption of conformity
with the relevant Essential Requirements of that Directive and associated EFTA regulations.
WARNING — Other requirements and other EU Directives may be applicable to the product(s) falling
within the scope of this standard.
INTERNATIONAL ISO
STANDARD 11680‑1
Second edition
2011-12-01
Machinery for forestry — Safety
requirements and testing for
pole‑mounted powered pruners —
Part 1:
Machines fitted with an integral
combustion engine
Matériel forestier — Exigences de sécurité et essais pour les perches
élagueuses à moteur —
Partie 1: Machines équipées d’un moteur à combustion interne intégré
Reference number
ISO 11680-1:2011(E)
©
ISO 2011
ISO 11680‑1:2011(E)
© ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO’s
member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved
ISO 11680‑1:2011(E)
Contents Page
Foreword . iv
Introduction . v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Safety requirements and/or protective measures . 2
4.1 General . 2
4.2 Hand‑grips . 2
4.3 Harness . 3
4.4 Cutting attachment. 4
4.5 Transport cover for cutting attachment . 5
4.6 Distance to cutting attachment . 5
4.7 Engine starting device . 6
4.8 Engine stopping device . 6
4.9 Throttle control . 6
4.10 Clutch . 7
4.11 Tanks . 7
4.12 Protection against contact with parts under high voltage . 8
4.13 Protection against contact with hot parts . 8
4.14 Exhaust gases . 9
4.15 Vibration . 9
4.16 Noise .10
4.17 Electromagnetic immunity .10
5 Information for use .10
5.1 Instruction handbook .10
5.2 Marking .13
5.3 Warnings .14
5.4 Test of labels .14
Annex A (informative) List of significant hazards .16
Bibliography .18
© ISO 2011 – All rights reserved iii
ISO 11680‑1:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International
Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 11680-1 was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and
forestry, Subcommittee SC 17, Manually portable forest machinery.
This second edition cancels and replaces the first edition (ISO 11680-1:2000), which has been technically
revised to reflect the state of the art.
ISO 11680 consists of the following parts, under the general title Machinery for forestry — Safety requirements
and testing for pole-mounted powered pruners:
— Part 1:
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.