EN ISO 11806-2:2022
(Main)Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with backpack power unit (ISO 11806-2:2022, Corrected version 2022-04)
Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with backpack power unit (ISO 11806-2:2022, Corrected version 2022-04)
This document specifies safety requirements, and measures for their verification, for the design and construction of portable, hand-held, powered brush-cutters and grass-trimmers with a backpack-mounted combustion engine power source and mechanical power transmission between the power source and the cutting attachment (hereafter referred to as “machine”). Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified.
This document, taken together with the relevant clauses of ISO 11806-1:2021 (see 4.1), deals with all significant hazards, hazardous situations and hazardous events, with the exception of whole-body vibration from the backpack power unit, relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
NOTE 1 A standardized test procedure for measuring whole-body vibration from the backpack power unit is not available at the time of publication.
NOTE 2 See Annex A, together with ISO 11806-1:2021, Annex A, for a list of significant hazards.
This document is applicable to portable, hand-held, powered brush-cutters and grass-trimmers manufactured after its date of publication.
This document is not applicable to machines equipped with metallic cutting attachments consisting of more than one piece, such as pivoting chains or flail blades.
Land- und forstwirtschaftliche Maschinen - Sicherheitstechnische Anforderungen und Prüfung für tragbare handgehaltene motorbetriebene Freischneider und Grastrimmer - Teil 2: Maschinen für den Gebrauch mit rückentragbarer Antriebseinheit (ISO 11806-2:2022, korrigierte Fassung 2022-04)
Dieses Dokument legt sicherheitstechnische Anforderungen sowie Maßnahmen zu deren Überprüfung für die Gestaltung und Konstruktion von tragbaren, handgehaltenen, motorbetriebenen Freischneidern und Grastrimmern mit rückentragbarer verbrennungsmotorisch betriebener Antriebseinheit und mechani¬scher Kraftübertragung zwischen der Antriebseinheit und der Schneidgarnitur (im Folgenden „Maschine“ genannt) fest. Verfahren für die Beseitigung oder Verringerung von Gefährdungen, die durch den Einsatz dieser Maschinen entstehen, sowie die Art der Informationen für sichere Arbeitsweisen, die vom Hersteller zur Verfügung zu stellen sind, werden festgelegt.
Dieses Dokument, zusammen mit den relevanten Abschnitten von ISO 11806-1:2022 (siehe 4.1), behandelt alle signifikanten Gefährdungen, Gefährdungssituationen oder Gefährdungsereignisse, mit Ausnahme der von der rückentragbaren Antriebseinheit ausgehenden Ganzkörperschwingungen, die für diese Maschinen relevant sind, sofern sie zu dem vorgesehenen Zweck und bei vernünftigerweise durch den Hersteller vorhersehbarem Missbrauch eingesetzt werden.
ANMERKUNG 1 Ein standardisiertes Prüfverfahren zur Messung der Ganzkörperschwingungen, die von der rückentragbaren Antriebseinheit ausgehen, ist zum Ausgabedatum nicht verfügbar.
ANMERKUNG 2 Siehe Anhang A, zusammen mit ISO 11806-1:2022, Anhang A, zur Liste der signifikanten Gefährdungen.
Dieses Dokument ist anzuwenden für tragbare handgehaltene motorbetriebene Freischneider und Grastrimmer, die nach dessen Ausgabedatum hergestellt worden sind.
Dieses Dokument ist nicht anzuwenden für Maschinen, die mit mehrteiligen, metallischen Schneidgarnituren wie schwenkbaren Ketten oder Schlegelmessern ausgestattet sind.
Matériel agricole et forestier - Exigences de sécurité et essais pour débroussailleuses et coupe-herbe portatifs à moteur - Partie 2: Machines pour utilisation avec source motrice portée à dos (ISO 11806-2:2022, Version corrigée 2022-04)
Le présent document spécifie les exigences de sécurité et les mesures de protection pour leur vérification, pour la conception et la construction des débroussailleuses et des coupe-herbe portatifs à moteur, tenus à la main, équipés d’une source motrice à moteur à combustion interne, portée à dos, et d’une transmission mécanique de puissance entre la source motrice et le dispositif de coupe (appelés «machines» dans la suite du texte). Il spécifie des méthodes pour éliminer ou réduire les phénomènes dangereux inhérents à l’utilisation de ces machines et le type d’informations devant être fournies par le fabricant sur les pratiques d’utilisation sûre.
Le présent document, conjointement avec les articles pertinents de l’ISO 11806‑1:2021 (voir 4.1), traite de tous les phénomènes dangereux, situations dangereuses et événements dangereux significatifs, à l’exception des vibrations transmises à l’ensemble du corps par la source motrice portée à dos, pertinents pour ces machines lorsqu’elles sont utilisées normalement et dans des conditions de mauvais usage raisonnablement prévisibles par le fabricant.
NOTE 1 Aucune méthode d’essai normalisée permettant de mesurer les vibrations transmises à l’ensemble du corps par la source motrice portée à dos n’est actuellement disponible au moment de la publicaion.
NOTE 2 Pour la liste des phénomènes dangereux significatifs, voir l’Annexe A ainsi que l’ISO 11806‑1:2021, Annexe A.
Le présent document est applicable aux débroussailleuses et aux coupe-herbe portatifs à moteur tenus à la main fabriqués après sa date de publication.
Le présent document n’est pas applicable aux machines équipées de dispositifs de coupe métalliques constitués de plusieurs pièces, comme les chaînes articulées ou les lames à fléau.
Kmetijski in gozdarski stroji - Tehnične varnostne zahteve in preskus za prenosne, ročno vodene kosilnice s prosto rezjo, opremljene z rezilno ploščo ali kosilno nitko - 2. del: Naprave z nahrbtno prenosno pogonsko enoto (ISO 11806-2:2022, popravljena izdaja 2022-04 )
Ta dokument določa varnostne zahteve in ukrepe za njihovo preverjanje za načrtovanje ter izdelavo prenosnih, ročno vodenih kosilnic s prosto rezjo, opremljenih z rezilno ploščo ali kosilno nitko, z nahrbtnim motornim pogonom z notranjim izgorevanjem ter mehanskim prenosom napajanja med virom napajanja in nastavkom za rezanje (v nadaljevanju: »stroji«). Predpisane so metode za odpravljanje ali zmanjšanje tveganj, ki izhajajo iz uporabe teh strojev, in vrsta informacij o varnih delovnih praksah, ki jih mora zagotoviti proizvajalec. Ta dokument poleg ustreznih točk standarda ISO 11806-1:2021 (glej točko 4.1) obravnava vsa večja tveganja, nevarne situacije ali nevarne dogodke v zvezi s temi stroji, razen vibriranja celotnega telesa zaradi nahrbtnega motornega pogona, kadar se uporabljajo v skladu s predvidenim namenom in pod pogoji pričakovane nepravilne uporabe, ki jih določa proizvajalec. OPOMBA 1: V času objave dokumenta standardiziran preskusni postopek za merjenje vibracij celotnega telesa zaradi nahrbtnega motornega pogona ni na voljo. OPOMBA 2: Za seznam večjih tveganj glej dodatek A tega dokumenta in dodatek A standarda ISO 11806-1:2021. Ta dokument se uporablja za prenosne, ročno vodene kosilnice s prosto rezjo, opremljene z rezilno ploščo ali kosilno nitko, izdelane po datumu njegove izdaje. Ta dokument se ne uporablja za stroje, opremljene s kovinskimi nastavki za rezanje, ki jih sestavlja več delov, npr. vrteče se verige ali mlatilne lopatice.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2022
Nadomešča:
SIST EN ISO 11806-2:2012
Kmetijski in gozdarski stroji - Tehnične varnostne zahteve in preskus za prenosne,
ročno vodene kosilnice s prosto rezjo, opremljene z rezilno ploščo ali kosilno
nitko - 2. del: Naprave z nahrbtno prenosno pogonsko enoto (ISO 11806-2:2022)
Agricultural and forestry machinery - Safety requirements and testing for portable, hand-
held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with
backpack power unit (ISO 11806-2:2022)
Land- und forstwirtschaftliche Maschinen - Sicherheitstechnische Anforderungen und
Prüfung für tragbare handgehaltene motorbetriebene Freischneider und Grastrimmer -
Teil 2: Maschinen für den Gebrauch mit rückentragbarer Antriebseinheit (ISO 11806-
2:2022)
Matériel agricole et forestier - Exigences de sécurité et essais pour débroussailleuses et
coupe-herbe portatifs à moteur - Partie 2: Machines pour utilisation avec source motrice
portée à dos (ISO 11806-2:2022)
Ta slovenski standard je istoveten z: EN ISO 11806-2:2022
ICS:
65.060.80 Gozdarska oprema Forestry equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 11806-2
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2022
EUROPÄISCHE NORM
ICS 65.060.80 Supersedes EN ISO 11806-2:2011
English Version
Agricultural and forestry machinery - Safety requirements
and testing for portable, hand-held, powered brush-cutters
and grass-trimmers - Part 2: Machines for use with
backpack power unit (ISO 11806-2:2022)
Matériel agricole et forestier - Exigences de sécurité et Land- und forstwirtschaftliche Maschinen -
essais pour débroussailleuses et coupe-herbe portatifs Sicherheitstechnische Anforderungen und Prüfung für
à moteur - Partie 2: Machines pour utilisation avec tragbare handgehaltene motorbetriebene
source motrice portée à dos (ISO 11806-2:2022) Freischneider und Grastrimmer - Teil 2: Maschinen für
den Gebrauch mit rückentragbarer Antriebseinheit
(ISO 11806-2:2022)
This European Standard was approved by CEN on 24 August 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11806-2:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered . 4
European foreword
This document (EN ISO 11806-2:2022) has been prepared by Technical Committee ISO/TC 23 "Tractors
and machinery for agriculture and forestry" in collaboration with Technical Committee CEN/TC 144
“Tractors and machinery for agriculture and forestry” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2022, and conflicting national standards
shall be withdrawn at the latest by September 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11806-2:2011.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s) / Regulation(s).
For the relationship with EU Directive(s) / Regulation(s), see informative Annex ZA, which is an integral
part of this document.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 11806-2:2022 has been approved by CEN as EN ISO 11806-2:2022 without any
modification.
Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered
This European Standard has been prepared under Commission’s standardization request "M/396
mandate to CEN and CENELEC for standardisation in the field of machinery" to provide one voluntary
means of conforming to essential requirements of the Directive 2006/42/EC of the European
Parliament and of the Council of 17 May 2006 on machinery.
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding Essential
Requirements, of that Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and
Annex I of Directive 2006/42/EC
The relevant Essential Clause(s)/sub-clause(s) of this EN Remarks/Notes
Requirements of EU Directive
2006/42/EC
1. ESSENTIAL HEALTH AND SAFETY
REQUIREMENTS
1.1.2. Principles of safety integration 4.1
1.1.3. Materials and products 4.1,4.7
1.1.5. Design of machinery to 4.1,4.2, 4.3, 4.4
facilitate its handling
1.1.6. Ergonomics 4.2, 4.3, 4.4
1.1.7. Operating positions - not covered
1.2. CONTROL SYSTEMS
1.2.1. Safety and reliability of control 4.6
systems
1.2.2. Control devices 4.1, 4.6
1.2.3. Starting 4.1, 4.6
1.2.4. Stopping
1.2.4.1. Normal stop - not covered
1.2.4.2. Operational stop - not covered
1.2.4.4. Assembly of machinery - not covered
1.2.5. Selection of control or 4.6
operating modes
1.2.6. Failure of the power supply - not covered
1.3. PROTECTION AGAINST
MECHANICAL HAZARDS
The relevant Essential Clause(s)/sub-clause(s) of this EN Remarks/Notes
Requirements of EU Directive
2006/42/EC
1.3.1. Risk of loss of stability - not covered
1.3.2. Risk of break-up during 4.4, 4.5, 4.7
operation
1.3.3. Risks due to falling or ejected - not covered
objects
1.3.4. Risks due to surfaces, edges or - not covered
angles
1.3.6. Risks related to variations in
4.1, 4.6
operating conditions
1.3.7. Risks related to moving parts - not covered
1.3.8. Choice of protection against
risks arising from moving parts
1.3.8.1. Moving transmission parts - not covered
1.3.8.2. Moving parts involved in the - not covered
process
1.3.9. Risks of uncontrolled not covered
movements
1.4. REQUIRED CHARACTERISTICS
OF GUARDS AND PROTECTIVE
DEVICES
1.4.1. General requirements - not covered
1.4.2.1. Fixed guards - not covered
1.4.2.2. Interlocking movable guards - not covered
1.4.2.3. Adjustable guards restricting - not covered
access
1.4.3. Special requirements for - not covered
protective devices
1.5. RISKS DUE TO OTHER HAZARDS
1.5.2. Static electricity - not covered
1.5.3. Energy supply other than 4.4, 4.5, 4.7
electricity
1.5.4. Errors of fitting - not covered
1.5.5. Extreme temperatures - not covered
1.5.6. Fire 4.1, 4.7
1.5.8. Noise - not covered
1.5.9. Vibrations - not covered
1.5.11. External radiation - not covered
1.5.13. Emissions of hazardous 4.1, 4.4, 4.7
materials and substances
1.5.15. Risk of slipping, tripping or - not covered
The relevant Essential Clause(s)/sub-clause(s) of this EN Remarks/Notes
Requirements of EU Directive
2006/42/EC
falling
1.6. MAINTENANCE
1.6.1. Machinery maintenance - not covered
1.6.2. Access to operating positions - not covered
and servicing points
1.6.3. Isolation of energy sources - not covered
1.6.4. Operator intervention - not covered
1.6.5. Cleaning of internal parts - not covered
1.7. INFORMATION
1.7.1. Information and warnings on - not covered
the machinery
1.7.1.1. Information and information - not covered
devices
1.7.1.2. Warning devices - not covered
1.7.2. Warning of residual risks - not covered
1.7.3. Marking of machinery - not covered
1.7.4. Instructions - not covered
1.7.4.1. General principles for the - not covered
drafting of instructions
1.7.4.2. Contents of the instructions - not covered
1.7.4.3. Sales literature - not covered
2. SUPPLEMENTARY ESSENTIAL
HEALTH AND SAFETY
REQUIREMENTS FOR CERTAIN
CATEGORIES OF MACHINERY
2.2. PORTABLE HAND-HELD
AND/OR HAND-GUIDED
MACHINERY
2.2.1. General 4.2, 4.6
2.2.1.1. Instructions - not covered
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
INTERNATIONAL ISO
STANDARD 11806-2
Second edition
2022-02
Agricultural and forestry
machinery — Safety requirements
and testing for portable, hand-held,
powered brush-cutters and grass-
trimmers —
Part 2:
Machines for use with backpack
power unit
Matériel agricole et forestier — Exigences de sécurité et essais pour
débroussailleuses et coupe-herbe portatifs à moteur —
Partie 2: Machines pour utilisation avec source motrice portée à dos
Reference number
ISO 11806-2:2022(E)
ISO 11806-2:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 11806-2:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Safety requirements and/or protective measures . 3
4.1 General . 3
4.2 Distance to cutting attachment . 3
4.2.1 Requirements . 3
4.2.2 Verification .
...
SLOVENSKI STANDARD
01-maj-2022
Nadomešča:
SIST EN ISO 11806-2:2012
Kmetijski in gozdarski stroji - Tehnične varnostne zahteve in preskus za prenosne,
ročno vodene kosilnice s prosto rezjo, opremljene z rezilno ploščo ali kosilno
nitko - 2. del: Naprave z nahrbtno prenosno pogonsko enoto (ISO 11806-2:2022,
popravljena izdaja 2022-04 )
Agricultural and forestry machinery - Safety requirements and testing for portable, hand-
held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with
backpack power unit (ISO 11806-2:2022, Corrected version 2022-04)
Land- und forstwirtschaftliche Maschinen - Sicherheitstechnische Anforderungen und
Prüfung für tragbare handgehaltene motorbetriebene Freischneider und Grastrimmer -
Teil 2: Maschinen für den Gebrauch mit rückentragbarer Antriebseinheit (ISO 11806-
2:2022, korrigierte Fassung 2022-04)
Matériel agricole et forestier - Exigences de sécurité et essais pour débroussailleuses et
coupe-herbe portatifs à moteur - Partie 2: Machines pour utilisation avec source motrice
portée à dos (ISO 11806-2:2022, Version corrigée 2022-04)
Ta slovenski standard je istoveten z: EN ISO 11806-2:2022
ICS:
65.060.80 Gozdarska oprema Forestry equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 11806-2
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2022
EUROPÄISCHE NORM
ICS 65.060.80 Supersedes EN ISO 11806-2:2011
English Version
Agricultural and forestry machinery - Safety requirements
and testing for portable, hand-held, powered brush-cutters
and grass-trimmers - Part 2: Machines for use with
backpack power unit (ISO 11806-2:2022, Corrected
version 2022-04)
Matériel agricole et forestier - Exigences de sécurité et Land- und forstwirtschaftliche Maschinen -
essais pour débroussailleuses et coupe-herbe portatifs Sicherheitstechnische Anforderungen und Prüfung für
à moteur - Partie 2: Machines pour utilisation avec tragbare handgehaltene motorbetriebene
source motrice portée à dos (ISO 11806-2:2022, Freischneider und Grastrimmer - Teil 2: Maschinen für
Version corrigée 2022-04) den Gebrauch mit rückentragbarer Antriebseinheit
(ISO 11806-2:2022, korrigierte Fassung 2022-04)
This European Standard was approved by CEN on 24 August 2021.
This European Standard was corrected and reissued by the CEN-CENELEC Management Centre on 18 May 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N
EUROPÄISCHES KOMITEE FÜR NORMUN G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11806-2:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered . 4
European foreword
This document (EN ISO 11806-2:2022) has been prepared by Technical Committee ISO/TC 23 "Tractors
and machinery for agriculture and forestry" in collaboration with Technical Committee CEN/TC 144
“Tractors and machinery for agriculture and forestry” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2022, and conflicting national standards
shall be withdrawn at the latest by September 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 11806-2:2011.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s) / Regulation(s).
For the relationship with EU Directive(s) / Regulation(s), see informative Annex ZA, which is an integral
part of this document.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 11806-2:2022, Corrected version 2022-04 has been approved by CEN as EN ISO 11806-
2:2022 without any modification.
Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of Directive 2006/42/EC aimed to be covered
This European Standard has been prepared under Commission’s standardization request "M/396
mandate to CEN and CENELEC for standardisation in the field of machinery" to provide one voluntary
means of conforming to essential requirements of the Directive 2006/42/EC of the European
Parliament and of the Council of 17 May 2006 on machinery.
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of
the scope of this standard, a presumption of conformity with the corresponding Essential
Requirements, of that Directive and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and
Annex I of Directive 2006/42/EC
The relevant Essential Clause(s)/sub-clause(s) of this EN Remarks/Notes
Requirements of EU Directive
2006/42/EC
1. ESSENTIAL HEALTH AND SAFETY
REQUIREMENTS
1.1.2. Principles of safety integration 4.1
1.1.3. Materials and products 4.1,4.7
1.1.5. Design of machinery to 4.1,4.2, 4.3, 4.4
facilitate its handling
1.1.6. Ergonomics 4.2, 4.3, 4.4
1.1.7. Operating positions - not covered
1.2. CONTROL SYSTEMS
1.2.1. Safety and reliability of control 4.6
systems
1.2.2. Control devices 4.1, 4.6
1.2.3. Starting 4.1, 4.6
1.2.4. Stopping
1.2.4.1. Normal stop - not covered
1.2.4.2. Operational stop - not covered
1.2.4.4. Assembly of machinery - not covered
1.2.5. Selection of control or 4.6
operating modes
1.2.6. Failure of the power supply - not covered
1.3. PROTECTION AGAINST
MECHANICAL HAZARDS
The relevant Essential Clause(s)/sub-clause(s) of this EN Remarks/Notes
Requirements of EU Directive
2006/42/EC
1.3.1. Risk of loss of stability - not covered
1.3.2. Risk of break-up during 4.4, 4.5, 4.7
operation
1.3.3. Risks due to falling or ejected - not covered
objects
1.3.4. Risks due to surfaces, edges or - not covered
angles
1.3.6. Risks related to variations in
4.1, 4.6
operating conditions
1.3.7. Risks related to moving parts - not covered
1.3.8. Choice of protection against
risks arising from moving parts
1.3.8.1. Moving transmission parts - not covered
1.3.8.2. Moving parts involved in the - not covered
process
1.3.9. Risks of uncontrolled not covered
movements
1.4. REQUIRED CHARACTERISTICS
OF GUARDS AND PROTECTIVE
DEVICES
1.4.1. General requirements - not covered
1.4.2.1. Fixed guards - not covered
1.4.2.2. Interlocking movable guards - not covered
1.4.2.3. Adjustable guards restricting - not covered
access
1.4.3. Special requirements for - not covered
protective devices
1.5. RISKS DUE TO OTHER HAZARDS
1.5.2. Static electricity - not covered
1.5.3. Energy supply other than 4.4, 4.5, 4.7
electricity
1.5.4. Errors of fitting - not covered
1.5.5. Extreme temperatures - not covered
1.5.6. Fire 4.1, 4.7
1.5.8. Noise - not covered
1.5.9. Vibrations - not covered
1.5.11. External radiation - not covered
1.5.13. Emissions of hazardous 4.1, 4.4, 4.7
materials and substances
1.5.15. Risk of slipping, tripping or - not covered
The relevant Essential Clause(s)/sub-clause(s) of this EN Remarks/Notes
Requirements of EU Directive
2006/42/EC
falling
1.6. MAINTENANCE
1.6.1. Machinery maintenance - not covered
1.6.2. Access to operating positions - not covered
and servicing points
1.6.3. Isolation of energy sources - not covered
1.6.4. Operator intervention - not covered
1.6.5. Cleaning of internal parts - not covered
1.7. INFORMATION
1.7.1. Information and warnings on - not covered
the machinery
1.7.1.1. Information and information - not covered
devices
1.7.1.2. Warning devices - not covered
1.7.2. Warning of residual risks - not covered
1.7.3. Marking of machinery - not covered
1.7.4. Instructions - not covered
1.7.4.1. General principles for the - not covered
drafting of instructions
1.7.4.2. Contents of the instructions - not covered
1.7.4.3. Sales literature - not covered
2. SUPPLEMENTARY ESSENTIAL
HEALTH AND SAFETY
REQUIREMENTS FOR CERTAIN
CATEGORIES OF MACHINERY
2.2. PORTABLE HAND-HELD
AND/OR HAND-GUIDED
MACHINERY
2.2.1. General 4.2, 4.6
2.2.1.1. Instructions - not covered
WARNING 1 — Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 — Other Union legislation may be applicable to the product(s) falling within the scope of
this standard.
INTERNATIONAL ISO
STANDARD 11806-2
Second edition
2022-02
Corrected version
2022-04
Agricultural and forestry
machinery — Safety requirements
and testing for portable, hand-held,
powered brush-cutters and grass-
trimmers —
Part 2:
Machines for use with backpack
power unit
Matériel agricole et forestier — Exigences de sécurité et essais pour
débroussailleuses et coupe-herbe portatifs à moteur —
Partie 2: Machines pour utilisation avec source motrice portée à dos
Reference number
ISO 11806-2:2022(E)
ISO 11806-2:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 11806-2:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Safety requirements and/or protective measures . 3
4.1 General . 3
4.2 Distance to cutting attachment .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.