EN 1015-2:1998/A1:2006
(Amendment)Methods of test for mortar for masonry - Part 2: Bulk sampling of mortars and preparation of test mortars
Methods of test for mortar for masonry - Part 2: Bulk sampling of mortars and preparation of test mortars
Modification to Foreword, Clause 2, 3.3, 5.3 and 6.2.2.
Prüfverfahren für Mörtel für Mauerwerk - Teil 2: Probenahme von Mörteln und Herstellung von Prüfmörteln
Méthodes d'essai des mortiers pour maçonnerie - Partie 2: Echantillonage global des mortiers et préparation des mortiers pour essai
Metode preskušanja zidarskih malt - 2. del: Vzorčenje malt in priprava malt za preskušanje
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2007
0HWRGHSUHVNXãDQMD]LGDUVNLKPDOWGHO9]RUþHQMHPDOWLQSULSUDYDPDOW]D
SUHVNXãDQMH
Methods of test for mortar for masonry - Part 2: Bulk sampling of mortars and preparation
of test mortars
Prüfverfahren für Mörtel für Mauerwerk - Teil 2: Probenahme von Mörteln und
Herstellung von Prüfmörteln
Méthodes d'essai des mortiers pour maçonnerie - Partie 2: Echantillonage global des
mortiers et préparation des mortiers pour essai
Ta slovenski standard je istoveten z: EN 1015-2:1998/A1:2006
ICS:
91.100.10 Cement. Mavec. Apno. Malta Cement. Gypsum. Lime.
Mortar
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 1015-2:1998/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2006
ICS 91.100.10
English Version
Methods of test for mortar for masonry - Part 2: Bulk sampling of
mortars and preparation of test mortars
Méthodes d'essai des mortiers pour maçonnerie - Partie 2: Prüfverfahren für Mörtel für Mauerwerk - Teil 2:
Echantillonage global des mortiers et préparation des Probenahme von Mörteln und Herstellung von Prüfmörteln
mortiers d'essai
This amendment A1 modifies the European Standard EN 1015-2:1998; it was approved by CEN on 26 October 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉ
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.