iTeh Standards logo
EURUSD
Your shopping cart is empty.
CEN

EN 17084:2018/AC:2020

(Corrigendum)

Railway applications - Fire protection on railway vehicles - Toxicity test of materials and components

Railway applications - Fire protection on railway vehicles - Toxicity test of materials and components

This document describes the measurement of the toxicity potential of the products of combustion based on two test methods:
- Method 1: EN ISO 5659-2 Smoke chamber area-based test with Fourier transform infrared spectroscopy (FTIR) gas analysis techniques;
- Method 2: NF X70-100-2 Tubular furnace small mass-based test.
NOTE 1 This document also specifies test equipment and set out the calculation procedures for evaluation of toxicity data.
NOTE 2 This document can be used in addition to others for the determination of toxic gases from devices installed in tunnel.

Bahnanwendungen - Brandschutz in Schienenfahrzeugen - Prüfung der Toxizität von Materialien und Komponenten

Applications ferroviaires - Protection contre les incendies dans les véhicules ferroviaires - Essai de toxicité des matériaux et des composants

Železniške naprave - Požarna zaščita v železniških vozilih - Preskušanje toksičnosti materialov in sestavnih delov - Popravek AC

General Information

Status
Published
Publication Date
17-Mar-2020
ICS
13.220.40 - Ignitability and burning behaviour of materials and products
45.060.01 - Railway rolling stock in general
Technical Committee
CEN/TC 256 - Railway applications
Drafting Committee
CEN/TC 256/WG 1 - Fire safety
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
18-Mar-2020
Completion Date
18-Mar-2020
Directive
2008/57/EC - Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (Recast)
Mandate
M/483 - Mandate for programming and standardisation addressed to the European standardisation bodies under directive 2008/57/EC in the field of the interoperability of the rail system within the European Union
Ref Project
SIST EN 17084:2019/AC:2020 - Railway applications - Fire protection on railway vehicles - Toxicity test of materials and components

Relations

Corrects
EN 17084:2018 - Railway applications - Fire protection on railway vehicles - Toxicity test of materials and components
Effective Date
25-Dec-2019
EN 17084:2019/AC:2020EN 17084:2019/AC:2020
PreviousNext
Corrigendum
EN 17084:2019/AC:2020
English language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-junij-2020
Železniške naprave - Požarna zaščita v železniških vozilih - Preskušanje
toksičnosti materialov in sestavnih delov - Popravek AC
Railway applications - Fire protection on railway vehicles - Toxicity test of materials and
components
Bahnanwendungen - Brandschutz in Schienenfahrzeugen - Prüfung der Toxizität von
Materialien und Komponenten
Applications ferroviaires - Protection contre les incendies dans les véhicules ferroviaires
- Essai de toxicité des matériaux et des composants
Ta slovenski standard je istoveten z: EN 17084:2018/AC:2020
ICS:
13.220.40 Sposobnost vžiga in Ignitability and burning
obnašanje materialov in behaviour of materials and
proizvodov pri gorenju products
45.060.01 Železniška vozila na splošno Railway rolling stock in
general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 17084:2018/AC

NORME EUROPÉENNE
March 2020
EUROPÄISCHE NORM
ICS 13.220.40; 45.060.01
English version
Railway applications - Fire protection on railway vehicles - Toxicity test of
materials and components
Applications ferroviaires - Protection contre Bahnanwendungen - Brandschutz in
les incendies dans les véhicules ferroviaires - Schienenfahrzeugen - Prüfung der Toxizität
Essai de toxicité des matériaux et des von Materialien und Komponenten
composants
This corrigendum becomes effective on 18 March 2020 for incorporation in the official English
version of the EN.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N

EUROPÄISCHES KOMITEE FÜR NORMUN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

Frequently Asked Questions

EN 17084:2018/AC:2020 is a corrigendum published by the European Committee for Standardization (CEN). Its full title is "Railway applications - Fire protection on railway vehicles - Toxicity test of materials and components". This standard covers: This document describes the measurement of the toxicity potential of the products of combustion based on two test methods: - Method 1: EN ISO 5659-2 Smoke chamber area-based test with Fourier transform infrared spectroscopy (FTIR) gas analysis techniques; - Method 2: NF X70-100-2 Tubular furnace small mass-based test. NOTE 1 This document also specifies test equipment and set out the calculation procedures for evaluation of toxicity data. NOTE 2 This document can be used in addition to others for the determination of toxic gases from devices installed in tunnel.

This document describes the measurement of the toxicity potential of the products of combustion based on two test methods: - Method 1: EN ISO 5659-2 Smoke chamber area-based test with Fourier transform infrared spectroscopy (FTIR) gas analysis techniques; - Method 2: NF X70-100-2 Tubular furnace small mass-based test. NOTE 1 This document also specifies test equipment and set out the calculation procedures for evaluation of toxicity data. NOTE 2 This document can be used in addition to others for the determination of toxic gases from devices installed in tunnel.

EN 17084:2018/AC:2020 is classified under the following ICS (International Classification for Standards) categories: 13.220.40 - Ignitability and burning behaviour of materials and products; 45.060.01 - Railway rolling stock in general. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 17084:2018/AC:2020 has the following relationships with other standards: It is inter standard links to EN 17084:2018. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 17084:2018/AC:2020 is associated with the following European legislation: EU Directives/Regulations: 2008/57/EC; Standardization Mandates: M/483. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

You can purchase EN 17084:2018/AC:2020 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.

The article discusses EN 17084:2018/AC:2020, which is a standard for fire protection on railway vehicles. It specifically focuses on the toxicity test of materials and components used in railway vehicles. The document describes two test methods for measuring the toxicity potential of combustion products. The first method is the EN ISO 5659-2 Smoke chamber area-based test with Fourier transform infrared spectroscopy (FTIR) gas analysis techniques. The second method is the NF X70-100-2 Tubular furnace small mass-based test. The article also mentions that this document provides specifications for test equipment and calculation procedures for evaluating toxicity data. It notes that this standard can be used alongside others to determine toxic gases emitted by devices installed in tunnels.

제목: EN 17084:2018/AC:2020 - 철도 차량에 대한 화재 보호 - 물질 및 부품의 독성 시험 내용: 이 문서는 두 가지 시험 방법을 기반으로 연소 생성물의 독성 잠재력을 측정하는 것을 설명합니다: - 방법 1: EN ISO 5659-2 푸리에 변환 적외선 분광기 (FTIR) 가스 분석 기법을 사용한 흡연 챔버 면적 기반의 시험; - 방법 2: NF X70-100-2 튜브형 가용량 기반 소량 시험. 참고 1: 이 문서는 독성 데이터 평가를 위한 시험 장비의 사양 및 계산 절차를 명시합니다. 참고 2: 이 문서는 터널에 설치된 장치에서 방출되는 유독 가스를 결정하기 위해 다른 문서와 함께 사용될 수 있습니다.

記事タイトル：EN 17084:2018/AC:2020 - 鉄道車両における防火対策 - 材料および部品の有毒性試験 記事内容：この文書は、二つの試験方法に基づいて燃焼生成物の有毒性ポテンシャルを測定することを説明しています。 - 方法1：EN ISO 5659-2 フーリエ変換赤外分光法（FTIR）ガス分析技術を使用した煙室面積ベースの試験； - 方法2：NF X70-100-2 チューブ炉による小さな質量ベースの試験。 注1：この文書には、試験装置の仕様と有毒性データ評価の計算手順も記載されています。 注2：この文書は、トンネルに設置された装置から排出される有毒ガスを特定するために他の文書と併用できます。

This May Also Interest You

CEN
EN 17084:2018(Main)
Railway applications - Fire protection on railway vehicles - Toxicity test of materials and components
SIST EN 17084:2019

This document describes the measurement of the toxicity potential of the products of combustion based on two test methods:
- Method 1: EN ISO 5659-2 Smoke chamber area-based test with Fourier transform infrared spectroscopy (FTIR) gas analysis techniques;
- Method 2: NF X70-100-2 Tubular furnace small mass-based test.
NOTE 1 This document also specifies test equipment and set out the calculation procedures for evaluation of toxicity data.
NOTE 2 This document can be used in addition to others for the determination of toxic gases from devices installed in tunnel.

  • Standard
    44 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12285-4:2025(Main)
Workshop fabricated steel tanks - Part 4: Vertical cylindrical single skin and double skin tanks for the aboveground storage of flammable and nonflammable water polluting liquids other than for heating and cooling of buildings
kSIST FprEN 12285-4:2023

This document specifies the requirements for metallic shop fabricated cylindrical vertical steel tanks, single and double skin for the aboveground storage of water polluting liquids (both flammable and non-flammable) within the following limits:
—   from Ø 1250 mm up to Ø 4 000 mm inner tank nominal diameter, and
—   up to maximum overall shell length of 6 times the nominal inner tank diameter (or max 14 m shell lenght Lz), and
—   tank possible to be divided from 1 to 5 compartments,
—   for liquids with maximum density of up to 1,9 kg/l, and
—   with an operating pressure (P0) of maximum 50kPa (0,5 bar (g)) and minimum – 5 kPa (- 50 mbar (g)), and
—   where double skin tanks with vacuum leak detection system are used the kinematic viscosity of the stored media shall not exceed 5 × 10−3 m2/s.
This document is applicable for normal ambient temperature conditions (−40 °C to + 50 °C). Where temperatures are outside this range, additional requirements need to be taken into account.
This document is not applicable to tanks used for storage and/or supply of fuel/gas for building heating/cooling systems, and of hot or cold water not intended for human consumption, nor to loads and special measures necessary in areas subject to risk of earthquakes.
This document is not applicable for the storage of liquids having dangerous goods classes listed in Table 1 because of the special dangers involved.
Table 1 - List of dangerous goods which are not covered by this document
UN-classification   Type of dangerous goods
Class 1   Explosives
Class 4.2   Substances liable to spontaneous combustion
Class 4.3   Substances which in contact with water emit flammable gases
Class 5.2   Organic peroxides
Class 6.2   Infectious substances
Class 7   Radioactive substances, hydrocyanic or hydrocyanic solvent liquids, metal carbons, hydrofluoric acid, bromide liquids
NOTE   The classifications referred to are those adopted by the United Nations Committee of Experts on the Transport of Dangerous Goods (not to be interpreted as tank classes described in 6.2).

  • Draft
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 14245:2021/A1:2025(Amendment)
Gas cylinders - Specifications and testing of LPG cylinder valves - Self-closing - Amendment 1 (ISO 14245:2021/Amd 1:2025)
SIST EN ISO 14245:2021/oprA1:2025
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11929-3:2025(Main)
Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 3: Applications to unfolding methods (ISO 11929-3:2025)
oSIST prEN ISO 11929-3:2025

The ISO 11929 series specifies a procedure, in the field of ionizing radiation metrology, for the calculation of the “decision threshold”, the “detection limit” and the “limits of the coverage interval” for a non-negative ionizing radiation measurand when counting measurements with preselection of time or counts are carried out. The measurand results from a gross count rate and a background count rate as well as from further quantities on the basis of a model of the evaluation. In particular, the measurand can be the net count rate as the difference of the gross count rate and the background count rate, or the net activity of a sample. It can also be influenced by calibration of the measuring system, by sample treatment and by other factors.
ISO 11929 has been divided into four parts covering elementary applications in ISO 11929-1, advanced applications on the basis of the ISO/IEC Guide 98-3:2008/Suppl 1:2008 in ISO 11929-2, applications to unfolding methods in this document, and guidance to the application in ISO 11929-4.
ISO 11929-1 covers basic applications of counting measurements frequently used in the field of ionizing radiation metrology. It is restricted to applications for which the uncertainties can be evaluated on the basis of the ISO/IEC Guide 98-3 (JCGM 2008). In ISO 11929-1:2025, Annex A, the special case of repeated counting measurements with random influences is covered, while measurements with linear analogous ratemeters, are covered in ISO 11929-1:2025, Annex B.
This document deals with the evaluation of measurements using unfolding methods and counting spectrometric multi-channel measurements if evaluated by unfolding methods, in particular, for alpha- and gamma‑spectrometric measurements. Further, it provides some advice on how to deal with correlations and covariances.
ISO 11929-4 gives guidance to the application of the ISO 11929 series, summarizes shortly the general procedure and then presents a wide range of numerical examples.
ISO 11929 Standard also applies analogously to other measurements of any kind especially if a similar model of the evaluation is involved. Further practical examples can be found, for example, in ISO 18589[7], ISO 9696[2], ISO 9697[3], ISO 9698[4], ISO 10703[5], ISO 7503[1], ISO 28218[8], and ISO 11665[6].
NOTE            A code system, named UncertRadio, is available for calculations according to ISO 11929- 1 to ISO 11929-3. UncertRadio[35][36] can be downloaded for free from https://www.thuenen.de/en/institutes/fisheries-ecology/fields-of-activity/marine-environment/coordination-centre-of-radioactivity/uncertradio.The download contains a setup installation file which copies all files and folders into a folder specified by the user. After installation one has to add information to the PATH of Windows as indicated by a pop‑up window during installation. English language can be chosen and extensive “help” information is available.

  • Draft
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14078:2025(Main)
Liquid petroleum products - Determination of fatty acid methyl ester (FAME) content in middle distillates - Infrared spectrometry method
SIST EN 14078:2026

This document specifies a test method for the determination of fatty acid methyl ester (FAME) content in diesel fuel or domestic heating fuel by mid-infrared (IR) spectrometry and a transmission sample cell, which applies to FAME contents of the three measurement ranges as follows:
-   range A: for FAME contents ranging from approx. 0,05 % (V/V) to approx. 3 % (V/V);
-   range B: for FAME contents ranging from approx. 3 % (V/V) to approx. 20 % (V/V);
-   range C: for FAME contents ranging from approx. 20 % (V/V) to approx. 50 % (V/V).
Principally, higher FAME contents can also be analysed if diluted; however, no precision data for results outside the specified range is available at present.
This test method was verified to be applicable to samples which contain FAME conforming to EN 14214. Reliable quantitative results are obtained only if the samples do not contain any significant amounts of other interfering components, especially esters and other carbonyl compounds which possess absorption bands in the spectral region used for quantification of FAME. If such interfering components are present, this test method is expected to produce higher values.
NOTE 1   For the purposes of this document, the term “% (V/V)” is used to represent the volume fraction (φ) of a material.
NOTE 2   For conversion of grams FAME per litre (g FAME/l) to volume fraction, a fixed density for FAME of 883,0 kg/m3 is adopted.
WARNING — The use of this document can involve hazardous materials, operations and equipment. This document does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this document to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 19085-15:2025(Main)
Woodworking machines - Safety - Part 15: Presses (ISO 19085-15:2025)
kSIST FprEN ISO 19085-15:2025

1.1    This document specifies the safety requirements and measures for
—    cold presses,
—    hot presses,
—    bending presses,
—    edge/face gluing presses,
—    membrane presses, and
—    embossing presses,
where the pressing force is applied by hydraulic, pneumatic or electrical actuators pushing two flat or shaped surfaces against each other, capable of continuous production use, altogether referred to as “machines”.
This document deals with all significant hazards, hazardous situations and events as listed in Annex A, relevant to machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer, including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases are taken into account.
1.2    This document is applicable to machines fitted with one or more of the following devices or additional working units, whose hazards have been dealt with:
a)    a device for hot gluing;
b)    a device for high-frequency gluing in the frequency range from 1 MHz to 400 MHz;
c)    a device for high-frequency shaping in the frequency range from 1 MHz to 400 MHz;
d)    an automatic workpiece loading and unloading system;
e)    an intermediate additional platen;
f)    a workpiece extractor;
g)    a horizontal pressing system;
h)    split moveable platens.
1.3    The machines are designed to process workpieces consisting of:
a)    solid wood;
b)    materials with similar characteristics to wood (see ISO 19085-1:2021, 3.2), except those with light alloy laminates/edges/profiles for high-frequency presses;
c)    wood-based material such as chipboard, fibreboard and plywood composed/laminated with steel sheets/edges/profiles, except for high-frequency presses;
d)    honeycomb board;
e)    composite boards made from the materials listed above.
1.4    This document does not deal with any hazards related to:
—    specific devices that differ from the list above;
—    hot fluid heating systems internal to the machine other than electrical;
—    any hot fluid heating systems external to the machine;
—    operation of taking intermediate platens out and in again;
—    the combination of a single machine being used with any other machine (as part of a line).
1.5    This document is not applicable to:
—    frame presses;
—    membrane presses where the pressing force is applied by vacuum only;
—    presses for producing chipboard, fibreboard, OSB;
—    machines intended for use in potentially explosive atmosphere;
—    machines manufactured before the date of publication of this document.

  • Draft
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15827:2025(Main)
Railway applications - System Engineering requirements for bogies and running gear
SIST EN 15827:2026

This document is applicable to the system engineering of bogies and running gear for rail vehicles, including those vehicles intended to operate under the Interoperability Directives.
It specifies the requirements to achieve:
-   a satisfactory design of bogie or running gear,
-   validation of the design within its operating envelope, and
-   a maintenance plan
to ensure that the relevant performance and safety criteria are maintained.
The scope of the system engineering process specified in this document includes the design, validation and maintenance of bogies and running gear. No requirements are specified for other systems components that are attached to the bogies or running gear, except to ensure that a satisfactory interface has been provided.
NOTE   Specifications that relate to bogies and running gear can only be considered in the context of a specific vehicle application. Therefore, the performance, including safety, can relate only to the bogies and running gear as part of a vehicle configuration and not to the individual elements of the bogies or running gear.

  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11929-1:2025(Main)
Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation - Fundamentals and application - Part 1: Elementary applications (ISO 11929-1:2025)
oSIST prEN ISO 11929-1:2025

The ISO 11929 series specifies a procedure, in the field of ionizing radiation metrology, for the calculation of the “decision threshold”, the “detection limit” and the “limits of the coverage interval” for a non-negative ionizing radiation measurand when counting measurements with preselection of time or counts are carried out. The measurand results from a gross count rate and a background count rate as well as from further quantities on the basis of a model of the evaluation. In particular, the measurand can be the net count rate as the difference of the gross count rate and the background count rate, or the net activity of a sample. It can also be influenced by calibration of the measuring system, by sample treatment and by other factors.
ISO 11929 has been divided into four parts covering elementary applications in this document, advanced applications on the basis of the ISO/IEC Guide 3-1 in ISO 11929-2, applications to unfolding methods in ISO 11929-3, and guidance to the application in ISO 11929-4.
This document covers basic applications of counting measurements frequently used in the field of ionizing radiation metrology. It is restricted to applications for which the uncertainties can be evaluated on the basis of the ISO/IEC Guide 98-3 (JCGM 2008). In Annex A, the special case of repeated counting measurements with random influences is covered, while measurements with linear analogous ratemeters are covered in Annex B.
ISO 11929-2 extends the former ISO 11929:2010 to the evaluation of measurement uncertainties according to the ISO/IEC Guide 98-3:2008/Suppl 1:2008. ISO 11929-2 also presents some explanatory notes regarding general aspects of counting measurements and on Bayesian statistics in measurements.
ISO 11929-3 deals with the evaluation of measurements using unfolding methods and counting spectrometric multi-channel measurements if evaluated by unfolding methods, in particular, for alpha- and gamma‑spectrometric measurements. Further, it provides some advice on how to deal with correlations and covariances.
ISO 11929-4 gives guidance to the application of the ISO 11929 series, summarizes shortly the general procedure and then presents a wide range of numerical examples. Information on the statistical roots of ISO 11929 and on its current development may be found elsewhere[33][34].
The ISO 11929 series also applies analogously to other measurements of any kind especially if a similar model of the evaluation is involved. Further practical examples can be found, for example, in ISO 18589[1], ISO 9696[2], ISO 9697[3], ISO 9698[4], ISO 10703[5], ISO 7503[6], ISO 28218[7] and ISO 11665[8].
NOTE            A code system, named UncertRadio, is available for calculations according to ISO 11929-1 to ISO 11929-3. UncertRadio[31][32] can be downloaded for free from https://www.thuenen.de/en/institutes/fisheries-ecology/fields-of-activity/marine-environment/coordination-centre-of-radioactivity/uncertradio. The download contains a setup installation file which copies all files and folders into a folder specified by the user. After installation one has to add information to the PATH of Windows as indicated by a pop‑up window during installation. English language can be chosen and extensive “help” information is available.

  • Draft
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11642:2025(Main)
Leather - Tests for colour fastness - Colour fastness to water (ISO 11642:2025)
kSIST FprEN ISO 11642:2025

This document specifies a method for determining the colour fastness to water of leather of all kinds at all stages of processing.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 23696-1:2025(Main)
Water quality - Determination of nitrate in water using small-scale sealed tubes - Part 1: Dimethylphenol colour reaction (ISO 23696-1:2023)
oSIST prEN ISO 23696-1:2025

This document specifies a method for the determination of nitrate as NO3-N in water of various origin such as natural water (including groundwater, surface water and bathing water), drinking water and wastewater, in a measuring range of concentration between 0,10 mg/l and 225 mg/l of N03-N using the small-scale sealed tube method. Different measuring ranges of small-scale sealed tube methods can be required.
The measuring ranges can vary depending on the type of the small-scale sealed tube method of different manufacturers.
It is up to the user to choose the small-scale sealed tube test with the appropriate application range or to adapt samples with concentrations exceeding the measuring range of a test by preliminary dilution.
NOTE 1   The results of a sealed-tube test are most precise in the middle of the application range of the test.
Manufacturers' small-scale sealed tube methods are based on dimethylphenol colour reaction depending on the typical operating procedure of the small-scale sealed tube used, see Clause 9.
NOTE 2   Laws, regulations or standards can require that the data is expressed as NO3- after conversion with the stoichiometric conversion factor 4,426 81 in Clause 11.
NOTE 3   In the habitual language, use of sewage treatment and on the displays of automated sealed-tube test devices, NO3 without indication of the negative charge has become the common notation for the parameter nitrate and especially for the parameter nitrate-N. This notation is adopted in this document even though not being quite correct chemical nomenclature.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day