EN 13971:2012
(Main)Carbonate and silicate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid
Carbonate and silicate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid
This European Standard specifies a method for the determination of the speed and effectiveness of the neutralising potential of calcium carbonate, calcium magnesium carbonate and calcium magnesium silicate liming materials by potentiometric titration with hydrochloric acid.
This method is applicable only to liming materials with a maximum particle size of 6,3 mm.
NOTE The type of liming material should be identified according to EN 14069 and the particle size should be determined according to EN 12948.
Carbonatische und silikatische Kalke - Bestimmung der Reaktivität - Potentiometrisches Titrationsverfahren mit Salzsäure
Diese Europäische Norm legt ein Verfahren für die Bestimmung der Geschwindigkeit und Wirksamkeit des Neutralisationspotentials von Calciumcarbonat sowie carbonatischen und silikatischen Calcium /Magnesium-Bodenverbesserungsmitteln (Kalkdüngern) durch potentiometrische Titration mit Salzsäure fest.
Dieses Verfahren gilt nur für Calcium-/Magnesium-Bodenverbesserungsmittel mit einer Korngröße von höchstens 6,3 mm.
Der Typ des Calcium-/Magnesium-Bodenverbesserungsmittels sollte nach EN 14069 identifiziert und die Korngröße nach EN 12948 bestimmt werden.
Amendements minéraux basiques carbonatés et silicatés - Détermination de la réactivité - Méthode par titrage potentiométrique à l'acide chlorhydrique
La présente Norme européenne spécifie une méthode pour déterminer la vitesse et l'efficacité du potentiel de neutralisation des carbonates de calcium, carbonates de calcium et de magnésium et silicates de calcium et de magnésium utilisés comme amendements minéraux basiques, par titrage potentiométrique à l’acide chlorhydrique.
La présente méthode s'applique seulement aux amendements minéraux basiques dont la taille des particules ne dépasse pas 6,3 mm.
Le type d’amendement minéral basique doit être identifié conformément à l’EN 14069 et la taille des particules doit être déterminée conformément à l’EN 12948.
Karbonatna in silikatna sredstva za apnjenje - Določevanje reaktivnosti - Potenciometrijska titracijska metoda s klorovodikovo kislino
Ta evropski standard določa metodo za ugotavljanje hitrosti in učinkovitosti nevtralizacijskega potenciala sredstev za apnenje s kalcijevim karbonatom, kalcijevim magnezijevim karbonatom in kalcijevim magnezijevim silikatom s potenciometrijsko titracijo s klorovodikovo kislino. Ta metoda se uporablja le za sredstva za apnenje z največjo velikostjo delcev 6,3 mm. Vrsta sredstva za apnenje naj bi se opredelila v skladu s standardom EN 14069, velikost delcev pa v skladu s standardom EN 12948.
General Information
- Status
- Withdrawn
- Publication Date
- 18-Dec-2012
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 260 - Fertilizers and liming materials
- Drafting Committee
- CEN/TC 260/WG 3 - Liming materials
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 16-Sep-2020
- Completion Date
- 28-Jan-2026
Relations
- Effective Date
- 26-Dec-2012
- Effective Date
- 03-Oct-2018
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Refers
EN 12945:2014+A1:2016 - Liming materials - Determination of neutralizing value - Titrimetric methods - Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Nonprofit organization that performs technical evaluations of building products.
Rainforest Alliance
International non-profit sustainability certification organization.
SCS Global Services
Global leader in environmental and sustainability certification.
Sponsored listings
Frequently Asked Questions
EN 13971:2012 is a standard published by the European Committee for Standardization (CEN). Its full title is "Carbonate and silicate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid". This standard covers: This European Standard specifies a method for the determination of the speed and effectiveness of the neutralising potential of calcium carbonate, calcium magnesium carbonate and calcium magnesium silicate liming materials by potentiometric titration with hydrochloric acid. This method is applicable only to liming materials with a maximum particle size of 6,3 mm. NOTE The type of liming material should be identified according to EN 14069 and the particle size should be determined according to EN 12948.
This European Standard specifies a method for the determination of the speed and effectiveness of the neutralising potential of calcium carbonate, calcium magnesium carbonate and calcium magnesium silicate liming materials by potentiometric titration with hydrochloric acid. This method is applicable only to liming materials with a maximum particle size of 6,3 mm. NOTE The type of liming material should be identified according to EN 14069 and the particle size should be determined according to EN 12948.
EN 13971:2012 is classified under the following ICS (International Classification for Standards) categories: 65.080 - Fertilizers; 91.100.10 - Cement. Gypsum. Lime. Mortar. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13971:2012 has the following relationships with other standards: It is inter standard links to EN 13971:2008, EN 13971:2020, EN 12948:2010, EN 13475:2001, EN 12048:1996, EN 1482-2:2024, EN 12945:2014+A1:2016. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13971:2012 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Carbonatische und silikatische Kalke - Bestimmung der Reaktivität - Potentiometrisches Titrationsverfahren mit SalzsäureAmendements minéraux basiques carbonatés et silicatés - Détermination de la réactivité - Méthode par titrage potentiométrique à l'acide chlorhydriqueCarbonate and silicate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid65.080GnojilaFertilizersICS:Ta slovenski standard je istoveten z:EN 13971:2012SIST EN 13971:2013en,fr,de01-maj-2013SIST EN 13971:2013SLOVENSKI
STANDARDSIST EN 13971:20081DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13971
December 2012 ICS 65.080 Supersedes EN 13971:2008English Version
Carbonate and silicate liming materials - Determination of reactivity - Potentiometric titration method with hydrochloric acid Amendements minéraux basiques carbonatés et silicatés -Détermination de la réactivité - Méthode par titrage potentiométrique à l'acide chlorhydrique
Carbonatische und silikatische Kalke - Bestimmung der Reaktivität - Potentiometrisches Titrationsverfahren mit Salzsäure This European Standard was approved by CEN on 3 November 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13971:2012: ESIST EN 13971:2013
Preparation of the test portion of liming materials coarser than 1 mm . 13Annex B (normative)
Arrangement of the test apparatus . 14Bibliography . 16 SIST EN 13971:2013
5.4 Silicone defoamer. 5.5 Standard buffer solution, pH = 2,0 (commercial solution). NOTE This has a limited life. 5.6 Standard buffer solution, pH = 4,0, (commercial solution). NOTE This has a limited life. 6 Preparation of the test sample 6.1 Prepare the sample of the liming material in accordance with EN 1482-2.
1) Metrohm 716 DMS Titrino® is an example of a suitable product available commercially. This information is given for the convenience of users of this European Standard and does not constitute an endorsement by CEN of this product. Equivalent products may be used if they can be shown to lead to the same results. 2) This substance is an example of a suitable product available commercially. This information is given for the convenience of users of this document and does not constitute an endorsement by CEN of this product. SIST EN 13971:2013
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...