Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling

This Standard specifies a method for testing the resistance of thermoplastics piping systems for soil and waste discharge inside buildings, marked "B", or buried in the ground within the building structure, marked "BD" or "UD", to 1500 cycles of elevated temperature cycling. The method assesses leaktightness and resistance to sagging. Note: Definitions for application area codes, such as "B", are given in the referring standards.

Kunststoff-Rohrleitungssysteme - Rohrleitungssysteme aus Thermoplasten für Abwasserleitungen innerhalb von Gebäuden - Prüfverfahren für die Temperaturbeanspruchbarkeit

Diese Norm legt ein Verfahren zur Prüfung der Widerstandsfähigkeit von Rohrleitungssystemen aus Thermoplasten für Abwasserleitungen innerhalb von Gebäuden, gekennzeichnet mit "B", oder erdverlegt innerhalb der Gebäudestruktur, gekennzeichnet mit "BD" oder "UD", gegen eine Temperaturwechselbeanspruchung mit 1500 Zyklen fest. Mit diesem Verfahren wird die Dichtheit und die Widerstandsfähigkeit gegen das Durchhängen der Rohre beurteilt. Anmerkung: Definitionen für die Bezeichnung von Anwendungsgebieten, wie z.B. "B", sind in den bezugnehmenden Normen enthalten.

Systèmes de canalisations en plastiques - Systèmes de canalisations thermoplastiques pour évacuation des eaux-vannes et des eaux usées à l'intérieur des bâtiments - Méthode d'essai de résistance à des cycles à température élevée

Cette norme prescrit une méthode pour déterminer la résistance des systèmes de canalisations thermoplastiques pour l'évacuation des eaux usées et eaux-vannes à l'intérieur des bâtiments, marquées "B", ou enterrées sous le bâtiment, marquées "BD" ou "UD", à 1500 cycles à une température élevée. Cette méthode évalue l'étanchéité et la résistance au fléchissement. Note: Les définitions des codes d'application sont données dans les normes de référence.

Cevni sistemi iz polimernih materialov - Plastomerni cevni sistemi za odpadno vodo in kanalizacijo v zgradbah - Metoda za preskus odpornosti proti zvišani temperaturi

General Information

Status
Withdrawn
Publication Date
23-Jan-1996
Withdrawal Date
20-Jan-2026
ICS
23.040.05 - Pipeline and its parts for external sewage systems
 
23.040.20 - Plastics pipes
Technical Committee
CEN/TC 155 - Plastics piping systems and ducting systems
Drafting Committee
CEN/TC 155 - Plastics piping systems and ducting systems
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
18-Oct-2017
Completion Date
21-Jan-2026
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
Mandate
M/BC/CEN/88/15 - Standardization request to CEN/CENELEC in the field of Water supply, drainage and sewerage
Ref Project
SIST EN 1055:1997 - Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling

Relations

Replaced By
EN ISO 13257:2017 - Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2010)
Effective Date
19-Oct-2016
Referred By
EN 1852-1:2009 - Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
Effective Date
28-Jan-2026
Referred By
EN 1519-1:1999 - Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Specifications for pipes, fittings and the system
Effective Date
28-Jan-2026
Referred By
EN 16397-1:2014 - Flexible couplings - Part 1: Performance requirements
Effective Date
28-Jan-2026
Referred By
EN 1566-1:1998 - Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system
Effective Date
28-Jan-2026
Referred By
EN 1451-1:1998 - Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
Effective Date
28-Jan-2026
Referred By
EN 13598-1:2010 - Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers
Effective Date
28-Jan-2026
Referred By
EN 13476-2:2007 - Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A
Effective Date
28-Jan-2026
Referred By
EN 1455-1:1999 - Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Requirements for pipes, fittings and the system
Effective Date
28-Jan-2026
Referred By
EN 1453-1:2000 - Plastics piping systems with structured wall-pipes for soil and waste discharge (low and high temperature) inside buildings - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes and the system
Effective Date
28-Jan-2026
Referred By
EN 13476-3:2007+A1:2009 - Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B
Effective Date
28-Jan-2026

Frequently Asked Questions

EN 1055:1996 is a standard published by the European Committee for Standardization (CEN). Its full title is "Plastics piping systems - Thermoplastics piping systems for soil and waste discharge inside buildings - Test method for resistance to elevated temperature cycling". This standard covers: This Standard specifies a method for testing the resistance of thermoplastics piping systems for soil and waste discharge inside buildings, marked "B", or buried in the ground within the building structure, marked "BD" or "UD", to 1500 cycles of elevated temperature cycling. The method assesses leaktightness and resistance to sagging. Note: Definitions for application area codes, such as "B", are given in the referring standards.

This Standard specifies a method for testing the resistance of thermoplastics piping systems for soil and waste discharge inside buildings, marked "B", or buried in the ground within the building structure, marked "BD" or "UD", to 1500 cycles of elevated temperature cycling. The method assesses leaktightness and resistance to sagging. Note: Definitions for application area codes, such as "B", are given in the referring standards.

EN 1055:1996 is classified under the following ICS (International Classification for Standards) categories: 23.040.05 - Pipeline and its parts for external sewage systems; 23.040.20 - Plastics pipes. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 1055:1996 has the following relationships with other standards: It is inter standard links to EN ISO 13257:2017, EN 1852-1:2009, EN 1519-1:1999, EN 16397-1:2014, EN 1566-1:1998, EN 1451-1:1998, EN 13598-1:2010, EN 13476-2:2007, EN 1455-1:1999, EN 1453-1:2000, EN 13476-3:2007+A1:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 1055:1996 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC, 93/38/EEC; Standardization Mandates: M/BC/CEN/88/15. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

EN 1055:1996 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Cevni sistemi iz polimernih materialov - Plastomerni cevni sistemi za odpadno vodo in kanalizacijo v zgradbah - Metoda za preskus odpornosti proti zvišani temperaturiKunststoff-Rohrleitungssysteme - Rohrleitungssysteme aus Thermoplasten für Abwasserleitungen innerhalb von Gebäuden - Prüfverfahren für die TemperaturbeanspruchbarkeitSystemes de canalisations en plastiques - Systemes de canalisations thermoplastiques pour évacuation des eaux-vannes et des eaux usées a l'intérieur des bâtiments - Méthode d'essai de rés
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...