iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 14545:2008

(Main)

Timber structures - Connectors - Requirements

Timber structures - Connectors - Requirements

This European Standard specifies requirements and test metods for materials, geometry, strength, stiffness and durability aspects (i.e. corrosion protection) of connectors  for use in load bearing timber structures.
Only connectors manufactured from steel are covered by this European Standard, like shear plates, split ring connectors, tooth plate connectors, punched metal plate fasteners and nailing plates. Definitions of these items are given in Clause 3.
This European Standard specifies also the evaluation of conformity procedures and includes requirements for marking of these products.
This European Standard does not cover connectors treated with fire retardants to improve their fire performance.

Holzbauwerke - Nicht stiftförmige Verbindungselemente - Anforderungen

Diese Europäische Norm legt Anforderungen an und Prüfverfahren für die Werkstoffe, die Geometrie, die Festigkeit, die Steifigkeit und die Dauerhaftigkeit (d. h. den Korrosionsschutz) von Verbindungselementen zum Einsatz in tragenden Holzbauwerken fest.
Diese Europäische Norm behandelt nur Verbindungselemente, die aus Stahl hergestellt werden, wie z. B. Scheibendübel, ein  und zweiseitige Ringkeildübel, Scheibendübel mit Zähnen, Nagelplatten und Lochbleche. Definitionen dieser Elemente sind Abschnitt 3 zu entnehmen.
Die vorliegende Europäische Norm legt auch die Verfahren zur Bewertung der Konformität dieser Erzeugnisse fest und enthält Anforderungen an deren Kennzeichnung.
Diese Europäische Norm behandelt keine Verbindungselemente, die mit Flammschutzmitteln behandelt wurden, um ihr Brandverhalten zu verbessern.

Structures en bois - Connecteurs - Exigences

La présente Norme européenne spécifie les exigences et méthodes d’essai concernant les matériaux, la géométrie,  la résistance, la rigidité la durabilité (par exemple protection contre la corrosion) des connecteurs utilisés dans des structures porteuses en bois.
Seuls les connecteurs fabriqués en acier sont couverts par la présente Norme européenne, comme les plaques de cisaillement, les  anneaux, les crampons, les connecteurs à plaque métallique emboutie ainsi que les plaques à clouer. Ces éléments sont définis à l'article 3.
La présente Norme européenne spécifie également les modes opératoires permettant d’évaluer la conformité et comprend les exigences en matière de marquage de ces produits.
La présente Norme européenne ne couvre pas les connecteurs traités avec des produits ignifuges pour améliorer leurs performances au feu.

Lesene konstrukcije - Spojniki (konektorji) - Zahteve

General Information

Status
Published
Publication Date
30-Sep-2008
Withdrawal Date
29-Apr-2009
ICS
91.080.20 - Timber structures
Technical Committee
CEN/TC 124 - Timber structures
Drafting Committee
CEN/TC 124/WG 4 - Connectors
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
01-Oct-2008
Completion Date
01-Oct-2008
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/112 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on structural timber products
Ref Project
SIST EN 14545:2009 - Timber structures - Connectors - Requirements

Buy Standard

EN 14545:2009EN 14545:2009
PreviousNext
Standard
EN 14545:2009
English language
36 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lesene konstrukcije - Spojniki (konektorji) - ZahteveHolzbauwerke - Nicht Stiftförmige Verbindungselemente - AnforderungenStructures en bois - Connecteurs - ExigencesTimber structures - Connectors - Requirements91.080.20Lesene konstrukcijeTimber structuresICS:Ta slovenski standard je istoveten z:EN 14545:2008SIST EN 14545:2009en,fr,de01-december-2009SIST EN 14545:2009SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14545October 2008ICS 91.080.20 English VersionTimber structures - Connectors - RequirementsStructures en bois - Connecteurs - ExigencesHolzbauwerke - Nicht stiftförmige Verbindungselemente -AnforderungenThis European Standard was approved by CEN on 9 August 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14545:2008: ESIST EN 14545:2009

Expression of corrosion protection specifications.21 Annex B (normative)
Procedures for the derivation of mechanical strength and stiffness characteristics of punched metal plate fasteners.22 Annex ZA (informative)
Clauses of this European
Standard addressing the provisions of the EU Construction Products Directive.27 Bibliography.36 SIST EN 14545:2009

1 Scope This European Standard specifies requirements and test methods for materials, geometry, strength, stiffness and durability aspects (i.e. corrosion protection) of connectors for use in load bearing timber structures.
Only connectors manufactured from steel are covered by this European Standard, like shear plates, split ring connectors, tooth plate connectors, punched metal plate fasteners and nailing plates. Definitions of these items are given in Clause 3. This European Standard specifies also the evaluation of conformity procedures and includes requirements for marking of these products. This European Standard does not cover connectors treated with fire retardants to improve their fire performance. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 912:1999, Timber fasteners - Specifications for connectors for timber EN 1075:1999, Timber structures - Test methods - Joints made with punched metal plate fasteners EN 1995-1-1:2004, Eurocode 5: Design of timber structures - Part 1-1: General - Common rules and rules for buildings EN 10025-2, Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels EN 10029, Hot rolled steel plates 3 mm thick or above - Tolerances on dimensions, shape and mass EN 10051, Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels - Tolerances on dimensions and shape EN 10088-1, Stainless steels - Part 1: List of stainless steels. EN 10088-2, Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
EN 10143, Continuously hot-dip coated steel sheet and strip - Tolerances on dimensions and shape EN 10204, Metallic products - Types of inspection documents EN 10292, Continuously hot-dip coated strip and sheet of steels with high yield strength for cold forming - Technical delivery conditions EN 10326, Continuously hot-dip coated strip and sheet of structural steels - Technical delivery conditions EN 10327, Continuously hot-dip coated strip and sheet of low carbon steels for cold forming -Technical delivery conditions EN 13271:2001, Timber fasteners - Characteristic load-carrying capacities and slip-moduli for connector joints SIST EN 14545:2009

3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 1995-1-1:2004 and the following apply. 3.1 connector shear plates, split ring connectors or tooth plate connectors as defined in EN 912 and punched metal plate fasteners or nailing plates as defined below 3.2
nailing plate flat rectangular metal plate containing pre-punched holes through which nails or screws are inserted
NOTE Used either on the external faces of a joint to join two or more pieces of timber of the same thickness in the same plane or on one external face of a timber member for anchoring and bracing. 3.3 punched metal plate fastener metal plate having integral projections punched out in one direction perpendicular to the base of the plate NOTE Used to join two or more piec
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 14592:2022(Main)
Timber structures - Dowel-type fasteners - Requirements
SIST EN 14592:2022

This document specifies the characteristics of the following types of dowel-type fasteners:
-   nails;
-   staples;
-   screws;
-   dowels;
-   bolts with nuts.
This document covers dowel-type fasteners for structural use in load bearing timber structures only. This document covers also the following additional intended uses of the screws:
-   to fix roof or cladding elements to the timber structure, with or without insulation layers; and
-   as reinforcement inserted in timber or in a glue laminated timber element to improve its resistance to compression perpendicular to the grain.
This document covers types of dowel-type fasteners, which are manufactured of either carbon steel or stainless steel and which may be coated for the following purposes:
-   corrosion protection (as Type 1 coating);
-   lubrication, to facilitate insertion (as Type 2 coating);
-   withdrawal enhancement and/or collation for nails and staples (adhesive and/or resin coatings) (as Type 3 coating).
This document covers types of dowel-type fasteners, which are manufactured from materials and within the specifications for their geometry related properties, only as they are specified for:
-   nails (see G.1);
-   staples (see G.2);
-   screws (see G.3);
-   dowels (see G.4); and
-   bolts with nuts (see G.5).
This document specifies also the assessment and verification of constancy of performance (AVCP) procedures of these characteristics and includes provisions for marking of dowel-type fasteners.
This document does not cover dowel-type fasteners treated with fire retardants to improve their fire performance, nor does it cover glued-in rods.

  • Standard
    78 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8970:2020(Main)
Timber structures - Testing of joints made with mechanical fasteners - Requirements for timber density (ISO 8970:2020)
SIST EN ISO 8970:2020

This document specifies a method based on density, for the selection of pieces of wood used in determining the strength and stiffness properties of joints between members of structural timber made with mechanical fasteners. It is intended to be used in conjunction with a test standard specifying a test method.
It is assumed that the wood pieces are conditioned to the relevant conditions, that the wood density is normally distributed and that any deviations are reported.
This document is applicable only to specimens of structural timber.
NOTE    It is emphasized that the wood density is only one of the properties that can influence the strength of a joint. Other relevant properties are, for example, growth-ring size and orientation, toughness and hardness.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16929:2018(Main)
Test methods - Timber floors - Determination of vibration properties
SIST EN 16929:2019

This document specifies test methods for the determination of natural frequencies, damping, unit point load deflection and acceleration of floors composed of sawn timber, engineered wood products, and mass timber beams or slabs (e.g. cross laminated timber CLT, glued laminated timber GL, nail laminated timber), with or without concrete screeds, as well as for timber-concrete composite floors.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16784:2016(Main)
Timber structures - Test methods - Determination of the long term behaviour of coated and uncoated dowel-type fasteners
SIST EN 16784:2016

This European Standard specifies a test method for the determination of the long duration withdrawal strength of coated and uncoated dowel-type fasteners in structural timber and timber products and wood based products for structural application.
The method applies to all types of nails, screws and staples.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14358:2016(Main)
Timber structures - Calculation and verification of characteristic values
SIST EN 14358:2016

This standard gives statistical methods for the determination of characteristic values from test results on a sample drawn from a clearly defined reference population of e.g. solid wood, fasteners, connectors and wood-based products. The characteristic value is an estimate of the property of the reference population and can be based on a 5-percentile value of strength, resistance or density as well as on a mean value for stiffness.
Parametric methods are given for the determination of lower and upper 5-percentiles. The upper 5-percentile is the 95-percentile.
This standard is suitable for use with any structural product in the frame of type testing as well as factory production control.
Sampling is not covered by this document, but reference is made to the relevant product standards.
This standard also provides the acceptance procedure for verification of a lot.
Depending on the product, characteristic values determined in accordance with this standard may be used directly or may need additional adjustments specified in the relevant product standards.
Note:   For example, in the case of solid timber, specific adjustment factors for calculation of characteristic values are given in EN 384.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1382:2016(Main)
Timber Structures - Test methods - Withdrawal capacity of timber fasteners
SIST EN 1382:2016

This European Standard specifies the test method for determining the withdrawal capacity of fasteners which have been inserted into timber (solid timber, LVL, CLT and glued laminated timber).
The test method applies to all types of nails, screws and staples.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1381:2016(Main)
Timber structures - Test methods - Load bearing stapled joints
SIST EN 1381:2016

This European Standard specifies test methods for determining the strength and deformation characteristics of stapled joints in load-bearing timber structures.
The methods assess joints with members of timber (solid timber and glued laminated timber) or wood-based products in the combination proposed for use in service and using all types of staples up to 3 mm diameter for circular cross-section staples or 4 mm x 2 mm for rectangular or oval cross-section staples.
The methods determine load-slip characteristics and maximum load of joints with laterally loaded staples where various angles between the applied force and the timber grain direction or the main direction of the wood-based products, respectively, are possible.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1383:2016(Main)
Timber structures - Test methods - Pull through resistance of timber fasteners
SIST EN 1383:2016

This European Standard specifies the test method for determining the resistance of timber to the head pull through of timber fasteners.
In this standard 'timber' includes solid timber, glued laminated timber and wood-based products.
The test method applies to all types of nails, screws and staples excluding screws with fully threaded shank.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1075:2014(Main)
Timber structures - Test methods - Joints made with punched metal plate fasteners
SIST EN 1075:2015

This European Standard specifies the test methods for determining the strength capacity and stiffness of joints made with punched metal plate fasteners in load bearing timber structures, being used to join two or more pieces of timber of the same thickness in the same plane. The properties measured are:
-   load-slip characteristics and maximum load resulting from the lateral resistance of the embedded projections, at various angles between the direction of the applied force and;
-   the axis of the fastener (load-fastener angle );
-   the direction of the grain of the timber (load-grain angle β);
-   the tension capacity of the fastener at various angles ;
-   the compression capacity of the fastener at various angles ;
-   the shear capacity of the fastener at various angles ..
A nail root test method is shown in Annex A.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 408:2010+A1:2012(Main)
Timber structures - Structural timber and glued laminated timber - Determination of some physical and mechanical properties
SIST EN 408:2010+A1:2012

This European Standard specifies test methods for determining the following properties of structural timber and glued laminated timber: modulus of elasticity in bending; shear modulus; bending strength; modulus of elasticity in tension parallel to the grain; tension strength parallel to the grain; modulus of elasticity in compression parallel to the grain; compression strength parallel to the grain; modulus of elasticity in tension perpendicular to the grain; tension strength perpendicular to the grain; modulus of elasticity in compression perpendicular to the grain; compression strength perpendicular to the grain and shear strength.
In addition, the determination of dimensions, moisture content, and density of test pieces are specified.
The methods apply to rectangular and circular shapes (of substantially constant cross section) of solid unjointed timber or finger-jointed timber and glued laminated timber unless stated otherwise.

  • Standard
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day