EN 15380-2:2006

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Railway applications - Designation system for railway vehicles - Part 2: Product groupsVNORSLApplications ferroviaires - Systeme de classification pour véhicules ferroviaires - Partie 2: Groupes des produitsBahnanwendungen - Kennzeichnungssystematik für Schienenfahrzeuge - Teil 2: ProduktgruppenTa slovenski standard je istoveten z:EN 15380-2:2006SIST EN 15380-2:2006en45.060.01Železniška vozila na splošnoRailway rolling stock in general01.110L]GHONHTechnical product documentationICS:SLOVENSKI
STANDARDSIST EN 15380-2:200601-oktober-2006

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15380-2April 2006ICS 01.110; 45.060.01 English VersionRailway applications - Designation system for railway vehicles -Part 2: Product groupsApplications ferroviaires - Système de classification pourvéhicules ferroviaires - Partie 2: Groupes des produitsBahnanwendungen - Kennzeichnungssystematik fürSchienenfahrzeuge - Teil 2: ProduktgruppenThis European Standard was approved by CEN on 6 March 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15380-2:2006: E

prEN 15380-2:2005 (E)
2 Contents Page Foreword.3 1 Scope.4 2 Normative references.4 3 Terms and definitions.4 4 Prouduct group plan.5 4.1 General.5 4.2 Code letters for main product groups and subproduct groups.7 4.2.1 Code letters for the main product groups (MPG).7 4.2.2 Code letters for the subproduct groups (SPG).8 4.3 Combined groups.9 Annex A (informative)
Examples of product groups.10 Bibliography.29
List of Figures Figure 1 — Principle of product group designation.5
List of Tables Table 1 — Summary of the MPG.7 Table 2 — Summary of the MPG and SPG.8 Table A.1 — Examples of subproduct groups.10 Table A.2 — Keyword index, in alphabetical order.22

prEN 15380-2:2005 (E) 3 Foreword This document (EN 15380-2:2006) has been prepared by Technical Committee CEN/TC 256 “Railway applications”, the secretariat of which is held by DIN. This document shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by October 2006, and conflicting national standards shall be withdrawn at the latest by October 2006. The EN 15380 series of standards, Railway applications – Designation system for railway vehicles consists of: ¾ Part 1: General principles ¾ Part 2: Product groups ¾ Part 3: Designation of installation sites and locations This European Standard is based on Part 2 of the DIN 25002 series of standards. After approval, the text of
DIN 25002-2 submitted to the PQ procedure was brought into line with the formal requirements of an EN.
The resulting editorial amendments have led to slightly modified wordings but they have no effect on the technical content of this document. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.

prEN 15380-2:2005 (E)
4 1 Scope As a railway-specific technical standard, this European Standard is the basis for establishing product-oriented structures. This standard essentially is for product structuring; however the function-overlapping "combined assemblies" have to be taken into account. This structure is a common basis for communication between customer, suppliers, subcontractors and others in all stages of the cooperation. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 61346-1:1996, Industrial systems, installations and equipment and industrial products – Structuring principles and reference
designations – Part 1: Basic rules (IEC 61346-1:1996) EN 61346-2:2000, Industrial systems, installations and equipment and industrial products – Structuring principles and reference
designations – Part 2: Classification of
objects and codes for classes
(IEC 61346-2:2000)
3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 assembly composition of elements that cannot yet be used independently
NOTE
Up to now, the classes have been designated as assemblies. If an application-specific subdivision of these assemblies is carried out, the assembly is then often designated as a main assembly and the subdivision is designated as a subassembly 3.2 entity treated part, element, device, subsystem, functional unit, object or system that can be observed in its own right
[EN 13460-2002]
3.3 function characteristic effect or aim of an object in conjunction with other objects
NOTE
Instead of object, the universal term entity treated may also be used here 3.4 main function defining function of a product/assembly 3.5 auxiliary operating equipment sum of devices supplying power for all product groups as well as controlling and regulating the "converter device and battery device" main product groups of a rail vehicle

prEN 15380-2:2005 (E) 5 3.6 fitting out assemblies and parts making up the external and internal panelling and interior partitioning of the vehicle
3.7 interior appointments assemblies and parts inside the vehicle designed for direct use by passengers and train crews
3.8 combined assembly assembly that performs several functions together and forms a structural entity
3.9 main product group group that performs the main function of a component/assembly
3.10 subproduct group group that performs a subfunction of a component/assembly within the framework of a main function
3.11 component uniquely identifiable product that is considered indivisible for a particular planning or control purpose and/or which cannot be disassembled without it being destroyed
NOTE
A component for one organizational group may be the final assembly of another group, e.g. an electric motor. 4 Prouduct group plan 4.1 General The designation system of the product group structure is made up of the letters of the alphabet, excluding I and O, and special characters. The main product groups, see Table 1, and subproduct groups, see Table 2, are each designated by single characters.
The designation shall be incorporated in the documentation. NOTE The function groups of the withdrawn DIN 43104 are reflected in product groups F to P.
Key 1 "Product" prefix sign according to EN 61346-1 2 Main product group (MPG) according to 4.2.1 3 Subproduct group (SPG) according to 4.2.2 4 Serial number (no specification)
Figure 1 — Principle of product group designation

prEN 15380-2:2005 (E)
6 The designation begins with particulars of the main product group and assembly and is supplemented by the designation of the subproduct group. Further designation at the level of the subproduct groups and at other lower levels is possible. The distribution software of the individual product groups is allocated to the product groups as required.

prEN 15380-2:2005 (E) 7 4.2 Code letters for main product groups and subproduct groups 4.2.1 Code letters for the main product groups (MPG) Table 1 — Summary of the MPG MPG designationa Name of the MPG B Vehicle body C Vehicle fitting out D Interior appointments E Running gear F Power system, drive unit G Control apparatus for train operations H Auxiliary operating equipment J Monitoring and safety equipment K Lighting L Air conditioning M Ancillary operating equipment N Doors, entrances P Information facilities Q Pneumatic/hydraulic equipment R Brake S Vehicle linkage devices T Carrier systems, enclosures U Electrical wiring a The main product groups shall not be used as a single designation. Table 1 contains only a summary of the MPG. According to the requirements of EN 61346-2:2000, the designations A and V to Z are pre-allocated.

prEN 15380-2:2005 (E)
8 4.2.2 Code letters for the subproduct groups (SPG) Table 2 — Summary of the MPG and SPG
Table 2 (continued) Code letters for
Code letters for MPG SPG Name
MPG
SPG Name
A Vehicle body
A Control apparatus for train operations B Underframe
B Power supply controls C Side walls
C Driving and brake controls D Roof
D Power generation controls E Head of vehicle
E System data acquisition F End walls
G F Power storage controls G Weld-on/add-on parts
A Auxiliary operating equipment H Intermediate floor
B Converter equipment B J Partitions
C Battery device A Vehicle fitting out
D On-board supply system B Window
E Cooling unit for power and drive systems C Floor
H F Emergency power generators D Interior panelling
A Monotoring and safety devise E Partitions
B Measuring and protective devices
F External additions
C Indicating, recording, display devices G Vehicle paintwork
D Safety equipment C H Insulation
E Data transmission devices A Interior appointments
F Communication equipment B Rails, handles (inside)
J G Miscellaneous equipment C Seats, sleeping berths, tables
A Lighting D Sanitary facilities
B Exterior lighting equipment E Luggage racks
K C Interior lighting equipment D F Additional devices
A Air conditioning A Running gear
B Intake/evacuation of air B Supporting structures
C Treatment C Wheelsets
D Distribution D Suspension, damping, balancing gear
L E Regulation E Driving systems (active)
A Ancillary operating equipment F Driven systems (passive)
B Sanding equipment E G Safety add-ons
C Lubricating equipment A Power system, drive unit
D Points operating equipment B Power supply
E Ticket machines C Power generation
M F Passenger counting device D Power conversion
A Doors, entrances E Power dissipation
B External doors F F Power storage
N C Internal doors
prEN 15380-2:2005 (E) 9
Table 2 (continued)
Table 2 (continued) Code letters for
Code letters for MPG SPG
MPG SPG
D Entrances, steps (not inside)
C Manual coupling devices N E Entrances for the disabled
D Buffing gear A Information facilities
E Towing gear
(emergency couplings) B Visual information facilities
F Gangways/gangway facilities C Visual information elements
S G Vehicle-vehicle interface for media, signals, power D Entertainment
A Carrier systems, enclosures E Advertizing
B Cabinets, boxes, containers P F Audible information facilities
C Frames, boards A Pneumatic/hydraulic equipment
D Control and display units B Generation
T E Electronic rack systems C Treatment
A Electrical wiring D Storage
B Cables, conductors and bars Q E Distribution
C Marking and connection material A Brake
D Connecting material B Brake components
E Bushings R C Mechanical brake force transmission
U F Cable ducts, pipes and flexible tubes A Vehicle linkage devices
S B Automatic coupling devices
4.3 Combined groups The order of the combined groups in the product group structure depends on their main function (e.g. gantry running gear in subproduct group EA, driver's desk in subproduct grooup TD).

prEN 15380-2:2005 (E)
10 Annex A (informative)
Examples of product groups The index in Table A.1 indicates the assignment of important groups and parts. This list enables the user of this standard to assign frequently used groups and parts to the particular main product groups and subproduct groups. Names with locations, e.g. "Add-on parts on machine room floor" are not included in this index. Installation sites are given in EN 15380-3. Table A.1 does not claim to be complete. Table A.1 — Examples of subproduct groupsMPG SPG Name Examples of SPG B A Body B A Vehicle body Carcass work for vehicle B A
Rough bodywork B B Underframe Bead floor B B
Bottom deck B B
Bottom frame B B
Bottom framework B B
Breast piece B B
Corrugated sheet floor B B
Hea
...