EN 3745-517:2012
(Main)Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 517: Cable tie clamping test
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 517: Cable tie clamping test
This standard specifies a method of determining the attenuation variation of an optical cable when clamped to
a mandrel with cable ties, simulating the condition in an installed harness.
Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 517: Klemmprüfung mit Kabelbindern
Diese Europäische Norm legt ein Verfahren zur Bestimmung der Dämpfungsänderung einer optischen Leitung fest, während diese mit Kabelbindern an einem Dorn befestigt ist, um die Bedingungen in einem installierten Kabelbaum zu simulieren.
Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 517: Essai de serrage par colliers de frettage
La présente Norme Européenne spécifie une méthode pour déterminer la variation d’atténuation d’un câble optique lorsqu’il est maintenu sur un mandrin avec des frettes de câblage, simulant les conditions d’installation dans un harnais.
Aeronavtika - Optična vlakna in kabli za uporabo v zračnih plovilih - Preskusne metode - 517. del: Preskus zategljivosti kabelskih vezic
Ta evropski standard določa metodo za ugotavljanje sprememb v slabljenju optičnega kabla, ki je z kabelskimi vezicami pritrjen na trn, s čimer se posnema stanje na nameščenem pasovju.
General Information
- Status
- Withdrawn
- Publication Date
- 17-Jul-2012
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- ASD-STAN - Aerospace
- Drafting Committee
- ASD-STAN/D 2 - Electrical
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 22-Mar-2017
- Completion Date
- 28-Jan-2026
Relations
- Effective Date
- 29-Mar-2017
- Refers
EN 4056-001:2015 - Aerospace series - Cable ties for harnesses - Part 001: Technical specification - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
National Aerospace and Defense Contractors Accreditation Program (NADCAP)
Global cooperative program for special process quality in aerospace.
NSF-ISR
NSF International Strategic Registrations.
Orion Registrar Inc.
US-based certification body for management systems.
Sponsored listings
Frequently Asked Questions
EN 3745-517:2012 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 517: Cable tie clamping test". This standard covers: This standard specifies a method of determining the attenuation variation of an optical cable when clamped to a mandrel with cable ties, simulating the condition in an installed harness.
This standard specifies a method of determining the attenuation variation of an optical cable when clamped to a mandrel with cable ties, simulating the condition in an installed harness.
EN 3745-517:2012 is classified under the following ICS (International Classification for Standards) categories: 49.090 - On-board equipment and instruments. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 3745-517:2012 has the following relationships with other standards: It is inter standard links to EN 3745-517:2017, EN 4056-001:2015, EN 2591-100:2024, EN 3745-301:2012, EN 3745-100:2008, EN 3745-201:2002, EN 4641-101:2015, EN 4641-301:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 3745-517:2012 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 517: Klemmprüfung für KabelbinderSérie aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 517: Essai de serrage par colliers de frettageAerospace series - Fibres and cables, optical, aircraft use - Test methods
- Part 517: Cable tie clamping test49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3745-517:2012SIST EN 3745-517:2012en,de01-oktober-2012SIST EN 3745-517:2012SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3745-517
July 2012 ICS 49.090 English Version
Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 517: Cable tie clamping test
Série aérospatiale - Fibres et câbles optiques à usage aéronautique - Méthodes d'essais - Partie 517: Essai de serrage par colliers de frettage
Luft- und Raumfahrt - Faseroptische Leitungen für Luftfahrzeuge - Prüfverfahren - Teil 517: Klemmprüfung mit Kabelbindern This European Standard was approved by CEN on 23 March 2012.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3745-517:2012: ESIST EN 3745-517:2012
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...