EN ISO 3823-2:2003/A1:2008

SLOVENSKI STANDARD
01-september-2008
Zobozdravstvo - Vrtilni instrumenti - 2. del: Zobozdravniški polirnik - Dopolnilo 1
(ISO 3823-2:2003/Amd 1:2008)
Dentistry - Rotary bur instruments - Part 2: Finishing burs - Amendment 1 (ISO 3823-
2:2003/Amd 1:2008)
Zahnheilkunde - Rotierende Bohrinstrumente - Teil 2: Finierer (ISO 3823-2:2003/Amd
1:2008)
Art dentaire - Instruments rotatifs de fraisage - Partie 2: Fraises a polir - Amendement 1
(ISO 3823-2:2003/Amd 1:2008)
Ta slovenski standard je istoveten z: EN ISO 3823-2:2003/A1:2008
ICS:
11.060.25 =RERWHKQLþQLLQVWUXPHQWL Dental instruments
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 3823-2:2003/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2008
ICS 11.060.20
English Version
Dentistry - Rotary bur instruments - Part 2: Finishing burs -
Amendment 1 (ISO 3823-2:2003/Amd 1:2008)
Art dentaire - Instruments rotatifs de fraisage - Partie 2: Zahnheilkunde - Rotierende Bohrinstrumente - Teil 2:
Fraises à polir - Amendement 1 (ISO 3823-2:2003/Amd Finierer - Änderung 1 (ISO 3823-2:2003/Amd 1:2008)
1:2008)
This amendment A1 modifies the European Standard EN ISO 3823-2:2003; it was approved by CEN on 28 June 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3823-2:2003/A1:2008: E
worldwide for CEN national Members.

Contents Page
Foreword.3

Foreword
This document (EN ISO 3823-2:2003/A1:2008) has been prepared by Technical Committee ISO/TC 106
"Dentistry" in collaboration with Technical Committee CEN/TC 55 “Dentistry” the secretariat of which is held by
DIN.
This Amendment to the European Standard EN ISO 3823:2003 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by January 2009, and
conflicting national standards shall be withdrawn at the latest by January 2009.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 3823-2:2003/Amd 1:2008 has been approved by CEN as a EN ISO 3823-2:2003/A1:2008
without any modification.
INTERNATIONAL ISO
STANDARD 3823-2
Second edition
2003-05-15
AMENDMENT 1
2008-07-01
Dentistry — Rotary bur instruments —
Part 2:
Finishing burs
AMENDMENT 1
Art dentaire — Instruments rotatifs de fraisage —
Partie 2: Fraises à polir
AMENDEMENT 1
Reference number
ISO 3823-2:2003/Amd.1:2008(E)
©
ISO 2008
ISO 3823-2:2003/Amd.1:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyri
...