Dentistry - Rotary bur instruments - Part 2: Finishing burs - Amendment 1

Art dentaire — Instruments rotatifs de fraisage — Partie 2: Fraises à polir — Amendement 1

General Information

Status
Published
Publication Date
11-Jun-2008
ICS
11.060.20 - Dental equipment
Technical Committee
ISO/TC 106/SC 4 - Dental instruments
Drafting Committee
ISO/TC 106/SC 4/WG 1 - Rotary instruments
Current Stage
6060 - International Standard published
Start Date
12-Jun-2008
Due Date
22-May-2009
Completion Date
22-May-2009

Relations

Amends
ISO 3823-2:2003 - Dentistry - Rotary bur instruments - Part 2: Finishing burs
Effective Date
06-Jun-2022
Child
ISO 3823-2:2003 - Dentistry - Rotary bur instruments - Part 2: Finishing burs
Effective Date
15-Apr-2008

Overview

ISO 3823-2:2003/Amd 1:2008 is an international standard amendment focused on dentistry rotary bur instruments, specifically finishing burs. This amendment refines specifications related to the dimensions, blade counts, and introduces a standardized colour coding system for carbide finishing burs used in dental procedures. Developed by ISO/TC 106, Subcommittee SC 4 (Dental instruments), it ensures enhanced consistency, safety, and identification of rotary burs for dental professionals worldwide. The amendment was published by ISO in 2008 as an update to the original 2003 standard.

Key Topics

  • Dimension Corrections: The amendment corrects critical measurement values, such as adjusting the dimension ‘d’ from 0.05 mm to 0.5 mm to align with actual manufacturing standards.
  • Colour Coding System: A new colour coding framework for carbide finishing burs facilitates easy identification:
    • Red: Fine burs (standard finishing)
    • Yellow: Extra fine burs
    • White: Ultra fine burs
  • Detailed Tables: Updated tables (e.g., Table 8, Table 11, Table 12) include:
    • Nominal size designations
    • Diameter and length tolerances
    • Number of blades for different bur types
    • Corresponding colour codes for burs for consistent manufacturing specification
  • Shape Specifications: Addition of specifications for conical, pointed carbide finishing burs with smooth, rounded, non-cutting tips, designed to improve finishing quality.
  • Terminology Update: The replacement of “Quality 3” with “Grade 3” in section 6.4.2 for clarity and standardization.

Applications

This ISO amendment is crucial for manufacturers, dental professionals, and regulatory bodies involved in:

  • Dental bur Production: Ensures manufacturers produce finishing burs with precise, standardized dimensions and identifiable features for reliability and safety.
  • Clinical Dentistry: Assists clinicians in selecting appropriate rotary burs for finishing dental restorations with improved accuracy based on size and surface finish.
  • Quality Control: Enables regulatory authorities and dental instrument quality inspectors to verify compliance with recognized standards.
  • Instrument Identification: The colour coding simplifies bur identification, reducing errors during dental procedures and improving workflow efficiency.
  • Product Development: Facilitates innovation by providing a clear framework for bur dimensions and designs, aiding R&D departments in developing new dental rotary instruments.

Related Standards

  • ISO 3823-1: Dentistry - Rotary bur instruments - Part 1: Carbide burs - Specifications and requirements for the carbide burs category.
  • ISO 9683: Dentistry - Rotary instruments - Test methods for determining the durability and performance of dental burs.
  • ISO 10993: Biological evaluation of medical devices - Material biocompatibility relevant to dental instrument safety.
  • ISO/IEC Directives Part 2: Procedures for drafting and revising international standards applicable to dental instrument standardization processes.

Keywords: ISO 3823-2 amendment, dentistry rotary burs, finishing burs, carbide burs colour coding, dental instrument standards, dental bur dimensions, dental rotary instruments, ISO dental standards, dental bur specifications, conical carbide burs.

Frequently Asked Questions

ISO 3823-2:2003/Amd 1:2008 is a standard published by the International Organization for Standardization (ISO). Its full title is "Dentistry - Rotary bur instruments - Part 2: Finishing burs - Amendment 1". This standard covers: Dentistry - Rotary bur instruments - Part 2: Finishing burs - Amendment 1

Dentistry - Rotary bur instruments - Part 2: Finishing burs - Amendment 1

ISO 3823-2:2003/Amd 1:2008 is classified under the following ICS (International Classification for Standards) categories: 11.060.20 - Dental equipment. The ICS classification helps identify the subject area and facilitates finding related standards.

ISO 3823-2:2003/Amd 1:2008 has the following relationships with other standards: It is inter standard links to ISO 3823-2:2003; is excused to ISO 3823-2:2003. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

ISO 3823-2:2003/Amd 1:2008 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


INTERNATIONAL ISO
STANDARD 3823-2
Second edition
2003-05-15
AMENDMENT 1
2008-07-01
Dentistry — Rotary bur instruments —
Part 2:
Finishing burs
AMENDMENT 1
Art dentaire — Instruments rotatifs de fraisage —
Partie 2: Fraises à polir
AMENDEMENT 1
Reference number
ISO 3823-2:2003/Amd.1:2008(E)
©
ISO 2008
ISO 3823-2:2003/Amd.1:2008(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2008
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2008 – All rights reserved

ISO 3823-2:2003/Amd.1:2008(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
Amendment 1 to ISO 3823-2:2003 was prepared by Technical Committee ISO/TC 106, Dentistry,
Subcommittee SC 4, Dental instruments.

ISO 3823-2:2003/Amd.1:2008(E)
Dentistry — Rotary bur instruments —
Part 2:
Finishing burs
AMENDMENT 1
Page 9, 5.3.5.7, Table 7
Change the value for the dimension d from “0,05 mm” to “0,5 mm”.
In the following tables, add the following colour code in the specified lines:
Page 10, 5.3.6.1, Table 8
Table 8: add a column for colour and modify values as follows:
Designation
l
Number 2
d d l Colour
of nominal
1 2 1
of blades
± 0,5
diameter
Shank Shank Shank Shank
(Nominal size) nom. tol. max. min. min. Type 1 Type 2 Type 3 Type 3
Standard Standard Standard Short
018 1,8 ± 0,08 1,20 1,35 30 white 22,0 44,5 19,0 16,5

Page 13, 5.3.6.4.1, Table 11
...


NORME ISO
INTERNATIONALE 3823-2
Deuxième édition
2003-05-15
AMENDEMENT 1
2008-07-01
Art dentaire — Instruments rotatifs de
fraisage —
Partie 2:
Fraises à polir
AMENDEMENT 1
Dentistry — Rotary bur instruments —
Part 2: Finishing burs
AMENDMENT 1
Numéro de référence
ISO 3823-2:2003/Amd.1:2008(F)
©
ISO 2008
ISO 3823-2:2003/Amd.1:2008(F)
PDF – Exonération de responsabilité
Le présent fichier PDF peut contenir des polices de caractères intégrées. Conformément aux conditions de licence d'Adobe, ce fichier
peut être imprimé ou visualisé, mais ne doit pas être modifié à moins que l'ordinateur employé à cet effet ne bénéficie d'une licence
autorisant l'utilisation de ces polices et que celles-ci y soient installées. Lors du téléchargement de ce fichier, les parties concernées
acceptent de fait la responsabilité de ne pas enfreindre les conditions de licence d'Adobe. Le Secrétariat central de l'ISO décline toute
responsabilité en la matière.
Adobe est une marque déposée d'Adobe Systems Incorporated.
Les détails relatifs aux produits logiciels utilisés pour la création du présent fichier PDF sont disponibles dans la rubrique General Info
du fichier; les paramètres de création PDF ont été optimisés pour l'impression. Toutes les mesures ont été prises pour garantir
l'exploitation de ce fichier par les comités membres de l'ISO. Dans le cas peu probable où surviendrait un problème d'utilisation,
veuillez en informer le Secrétariat central à l'adresse donnée ci-dessous.

DOCUMENT PROTÉGÉ PAR COPYRIGHT

©  ISO 2008
Droits de reproduction réservés. Sauf prescription différente, aucune partie de cette publication ne peut être reproduite ni utilisée sous
quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit
de l'ISO à l'adresse ci-après ou du comité membre de l'ISO dans le pays du demandeur.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax. + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Publié en Suisse
ii © ISO 2008 – Tous droits réservés

ISO 3823-2:2003/Amd.1:2008(F)
Avant-propos
L'ISO (Organisation internationale de normalisation) est une fédération mondiale d'organismes nationaux de
normalisation (comités membres de l'ISO). L'élaboration des Normes internationales est en général confiée
aux comités techniques de l'ISO. Chaque comité membre intéressé par une étude a le droit de faire partie du
comité technique créé à cet effet. Les organisations internationales, gouvernementales et non
gouvernementales, en liaison avec l'ISO participent également aux travaux. L'ISO collabore étroitement avec
la Commission électrotechnique internationale (CEI) en ce qui concerne la normalisation électrotechnique.
Les Normes internationales sont rédigées conformément aux règles données dans les Directives ISO/CEI,
Partie 2.
La tâche principale des comités techniques est d'élaborer les Normes internationales. Les projets de Normes
internationales adoptés par les comités techniques sont soumis aux comités membres pour vote. Leur
publication comme Normes internationales requiert l'approbation de 75 % au moins des comités membres
votants.
L'attention est appelée sur le fait que certains des éléments du présent document peuvent faire l'objet de
droits de propriété intellectuelle ou de droits analogues. L'ISO ne saurait être tenue pour responsable de ne
pas avoir identifié de tels droits de propriété et averti de leur existence.
L'Amendement 1 à l'ISO 3823-2:2003 a été élaboré par le comité technique ISO/TC 106, Art dentaire,
sous-comité SC 4, Instruments dentaires.

ISO 3823-2:2003/Amd.1:2008(F)
Art dentaire — Instruments rotatifs de fraisage —
Partie 2:
Fraises à polir
AMENDEMENT 1
Page 9, 5.3.5.7, Tableau 7
Changer la valeur de la dimension d de «0,05 mm» en «0,5 mm».
Dans les tableaux ci-après, ajouter le code couleur suivant aux lignes spécifiées:
Page 10, 5.3.6.1, Tableau 8
Ajouter et modifier comme suit:
Désignation
l
Nombre 2
d d l Couleur
du diamètre
1 2 1
de dents
± 0,5
nominal
Queue Queue Que
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...