EN ISO 12312-1:2022
(Main)Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use (ISO 12312-1:2022)
Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use (ISO 12312-1:2022)
This document is applicable to all afocal (plano power) sunglasses and clip-ons for general use, including road use and driving, intended for protection against solar radiation.
Information on the use of sunglass filters is given in Annex A. Requirements for unmounted filters used as replacement or alternative filters are given in Annex C.
This document is not applicable to:
a) eyewear for protection against radiation from artificial light sources;
b) eye protectors intended for specific sports (e.g. ski goggles or other types – see ISO18527 (all parts));
c) sunglasses that have been medically prescribed for attenuating solar radiation;
d) products intended for direct observation of the sun, such as for viewing a partial or annular solar eclipse, for which ISO12312-2 applies;
e) products intended for occupational eye protection – see, for example, ISO16321 (all parts).
Augen- und Gesichtsschutz - Sonnenbrillen und ähnlicher Augenschutz - Teil 1: Sonnenbrillen für den allgemeinen Gebrauch (ISO 12312-1:2022)
Dieses Dokument ist anzuwenden für alle Sonnenbrillen ohne Korrektionswirkung (mit Nullgläsern) sowie Aufsteckscheiben für den allgemeinen Gebrauch einschließlich dem Autofahren und dem Gebrauch im Straßenverkehr, bestimmt für den Schutz gegen Sonnenstrahlung.
Anhang A gibt Informationen über die Verwendung von Sonnenschutzfiltern. Anforderungen an nicht montierte Sichtscheiben, die als Ersatz oder Wechselfilter verwendet werden, sind in Anhang C gegeben.
Dieses Dokument ist nicht anzuwenden für:
a) Augenschutz gegen die Strahlung künstlicher Lichtquellen;
b) Augenschutzgeräte für bestimmte Sportarten (z. B. Skibrillen oder andere Arten – siehe ISO 18527 [alle Teile]);
c) Sonnenbrillen, die aus medizinischen Gründen zur Dämpfung von Sonnenstrahlung verschrieben wurden;
d) Produkte, die für den direkten Blick in die Sonne, z. B. für die Beobachtung einer partiellen oder ringförmigen Sonnenfinsternis, vorgesehen sind, für die ISO 12312 2 gilt;
e) Produkte für den beruflichen Augenschutz – siehe beispielsweise ISO 16321 (alle Teile).
Protection des yeux et du visage - Lunettes de soleil et articles de lunetterie associés - Partie 1 : Lunettes de soleil pour usage général (ISO 12312-1:2022)
Le présent document s'applique à toutes les lunettes de soleil afocales (non correctrices) et aux additifs amovibles (clip-ons) d'utilisation générale, y compris par les usagers de la route et pour la conduite automobile, destinés à la protection contre le rayonnement solaire.
Des informations sur l'utilisation des filtres de protection contre les rayonnements solaires sont données dans l'Annexe A. Les exigences relatives aux filtres non montés utilisés comme filtres de remplacement ou complémentaires sont données dans l'Annexe C.
Le présent document ne s'applique pas:
a) aux équipements de protection de l'œil contre les rayonnements des sources de lumière artificielle;
b) aux protecteurs des yeux destinés à des sports particuliers (par exemple, les masques de ski ou autres types – voir l'ISO18527 (toutes les parties));
c) aux lunettes de soleil faisant l'objet d'une prescription médicale pour atténuer le rayonnement solaire;
d) aux produits destinés à l'observation directe du soleil, par exemple pour observer une éclipse solaire partielle ou annulaire, pour lesquels l'ISO12312-2 est applicable;
e) aux produits destinés à la protection des yeux à usage professionnel – voir, par exemple, l'ISO16321 (toutes les parties).
Varovanje oči in obraza - Sončna očala in sorodna oprema za varovanje oči - 1. del: Sončna očala za splošno uporabo (ISO 12312-1:2022)
Ta dokument se uporablja za vsa afokalna (brez korekcije) sončna očala in nastavke za sončna očala za splošno uporabo, tudi za uporabo na cesti in vožnjo, ki so namenjeni zaščiti pred sončnim sevanjem. Informacije o uporabi filtrov sončnih očal so navedene v dodatku A. Zahteve za nevgrajene filtre, ki se uporabljajo kot nadomestni ali alternativni filtri, so podane v dodatku C. Ta dokument se ne uporablja za: a) opremo za varovanje oči pred sevanjem umetnih svetlobnih virov, npr. v solariju; b) zaščito za oči pri specifičnih športih (npr. smučarska očala ali druge vrste – glej standard ISO 18527 (vse dele)); c) sončna očala, ki so bila zdravniško predpisana za slabitev sončnega sevanja; d) izdelke, namenjene neposrednemu opazovanju sonca, npr. za opazovanje delnega ali obročastega sončnega mrka, za katere se uporablja standard ISO 12312-2; e) izdelke za zaščito oči, namenjene varstvu pri delu – glej na primer standard ISO 16321 (vsi deli).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2022
Nadomešča:
SIST EN ISO 12312-1:2013
SIST EN ISO 12312-1:2013/A1:2015
Varovanje oči in obraza - Sončna očala in sorodna oprema za varovanje oči - 1.
del: Sončna očala za splošno uporabo (ISO 12312-1:2022)
Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for
general use (ISO 12312-1:2022)
Augen- und Gesichtsschutz - Sonnenbrillen und ähnlicher Augenschutz - Teil 1:
Sonnenbrillen für den allgemeinen Gebrauch (ISO 12312-1:2022)
Protection des yeux et du visage - Lunettes de soleil et articles de lunetterie associés -
Partie 1: Lunettes de soleil pour usage général (ISO 12312-1:2022)
Ta slovenski standard je istoveten z: EN ISO 12312-1:2022
ICS:
11.040.70 Oftalmološka oprema Ophthalmic equipment
13.340.20 Varovalna oprema za glavo Head protective equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 12312-1
EUROPEAN STANDARD
NORME EUROPÉENNE
July 2022
EUROPÄISCHE NORM
ICS 13.340.20 Supersedes EN ISO 12312-1:2013
English Version
Eye and face protection - Sunglasses and related eyewear -
Part 1: Sunglasses for general use (ISO 12312-1:2022)
Protection des yeux et du visage - Lunettes de soleil et Augen- und Gesichtsschutz - Sonnenbrillen und
articles de lunetterie associés - Partie 1: Lunettes de ähnlicher Augenschutz - Teil 1: Sonnenbrillen für den
soleil pour usage général (ISO 12312-1:2022) allgemeinen Gebrauch (ISO 12312-1:2022)
This European Standard was approved by CEN on 3 June 2022.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATIO N
EUROPÄISCHES KOMITEE FÜR NORMUN G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12312-1:2022 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Regulation 2016/425 aimed to be covered . 4
European foreword
This document (EN ISO 12312-1:2022) has been prepared by Technical Committee ISO/TC 94
"Personal safety -- Personal protective equipment" in collaboration with Technical Committee CEN/TC
85 “Eye protective equipment” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by January 2023, and conflicting national standards shall
be withdrawn at the latest by January 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 12312-1:2013, EN ISO 12312-1:2013/A1:2015.
This document has been prepared under a Standardization Request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of EU
Directive(s) / Regulation(s).
For the relationship with EU Directive(s) / Regulation(s), see informative Annex ZA, which is an integral
part of this document.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 12312-1:2022 has been approved by CEN as EN ISO 12312-1:2022 without any
modification.
Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of Regulation 2016/425 aimed to be covered
This European Standard has been prepared under a Commission’s standardization request (mandate
M/571) to provide one voluntary means of conforming to requirements of Regulation 2016/425.
Once this standard is cited in the Official Journal of the European Union under that Regulation
2016/425 compliance with the normative clauses of this standard given in Table ZA.1 confers, within
the limit of the scope of this standard, a presumption of conformity with the corresponding (essential)
requirements of that Regulation 2016/425 and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Annex II of Regulation
2016/425
Essential Requirements of Clause(s)/sub-clause(s) of
Remarks/Notes
Regulation this EN
1.1.1 Ergonomics 4.1; 4.2
1.1.2 Level and classes of 5.2; 5.3.5; 7.1; 7.2; 7.3; 7.6
protection
1.2.1 Absence of risks and other 5.3.2; 5.3.3; 5.3.4.4.4; 5.3.4.4.6;
“inherent” nuisance factors 6.1; 6.2; 6.3
1.2.1.1 Suitable constituent 4.3
materials
1.2.1.2 Satisfactory surface 4.1
condition of all PPE parts in
contact with the user
1.2.1.3 Maximum permissible 4.2; 5.3.2; 6.1; 6.2; 6.3
user impediment
1.3.2 Lightness and design 7.1; 7.2; 7.3; 7.4; 7.5; 7.6;
strength Clause 8; Clause 9; Clause 10;
11.2
1.4 Manufacturer’s instructions 12.1; 12.2
and informations
2.3 PPE for the face, eyes, and 4.2; 5.3.2; 5.3.3; Clause 6
respiratory system
2.12 bearing one or more 12.1; 12.2
identification marking or
indicators directly or indirectly
relating to health and safety
2.14 “Multi risk” PPE Clause 5; Clause 7; Clause 9
3.1.1 Impact caused by falling of 7.1; 7.3; 7.6 Requirement concerning
ejected objects and collision of protection against collision of
parts of the body with obstacle part of the body with obstacle is
not covered
3.9.1 Non-ionising radiation Clause 5; 12.1; 11.1; 11.2; 12.2
WARNING 1 – Presumption of conformity stays valid only as long as a reference to this European
Standard is maintained in the list published in the Official Journal of the European Union. Users of this
standard should consult frequently the latest list published in the Official Journal of the European
Union.
WARNING 2 – Other Union legislation may be applicable to product(s) falling within the scope of this
standard.
INTERNATIONAL ISO
STANDARD 12312-1
Second edition
2022-06
Eye and face protection — Sunglasses
and related eyewear —
Part 1:
Sunglasses for general use
Protection des yeux et du visage — Lunettes de soleil et articles de
lunetterie associés —
Partie 1: Lunettes de soleil pour usage général
Reference number
ISO 12312-1:2022(E)
ISO 12312-1:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 12312-1:2022(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Construction and materials .3
4.1 Construction . 3
4.2 Filter material and surface quality . 3
4.3 Physiological compatibility . 3
4.4 Headforms . 4
5 Transmittance . 4
5.1 Test methods . 4
5.2 Transmittance and filter categories . 4
5.3 General transmittance requirements . 5
5.3.1 Uniformity of luminous transmittance . 5
5.3.2 Requirements for road use and driving . 6
5.3.3 Wide-angle scatter . 6
5.3.4 Additional transmittance requirements for specific filter types . 6
5.3.5 Claimed transmittance properties . 8
6 Refractive power .10
6.1 Spherical and astigmatic power . 10
6.2 Spatial deviation . 10
6.3 Prism imbalance (relative prism error) . 10
7 Robustness .11
7.1 Minimum robustness of filters . 11
7.2 Frame deformation and retention of filters. 11
7.3 Impact resistance of sunglasses, strength level 1 (optional specification) . 11
7.4 Increased endurance of sunglasses (optional specification). 11
7.5
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.