EN 13819-3:2019+A1:2024
(Main + Amendment)Hearing protectors - Testing - Part 3: Supplementary acoustic test methods
Hearing protectors - Testing - Part 3: Supplementary acoustic test methods
This document specifies supplementary acoustic test methods for hearing protectors with additional electronic functions. The purpose of these tests is to enable assessment of the hearing protector performance as specified in the appropriate product standards.
Gehörschützer - Prüfung - Teil 3: Zusätzliche akustische Prüfverfahren
Dieses Dokument legt zusätzliche akustische Prüfverfahren für Gehörschützer mit elektronischen Zusatz¬funktionen fest. Zweck dieser Prüfungen ist, die Beurteilung der Leistungsfähigkeit des Gehörschützers, wie sie in der jeweiligen Produktnorm festgelegt ist, zu ermöglichen.
Protecteurs individuels contre le bruit - Essais - Partie 3 : Méthodes d'essais acoustiques supplémentaires
Le présent document décrit des méthodes d'essais acoustiques supplémentaires des protecteurs contre le bruit, dotés de fonctions électroniques additionnelles. L'objectif de ces essais est de permettre l'évaluation des performances du protecteur contre le bruit telle que spécifiée dans les normes de produit appropriées.
Varovala sluha - Preskušanje - 3. del: Dodatna akustična preskusna metoda (vključuje dopolnilo A1)
Ta dokument določa dodatne akustične preskusne metode za varovala sluha z dodatnimi elektronskimi funkcijami. Namen teh preskusov je omogočiti oceno delovanja varovala sluha, kot je določeno v ustreznih standardih za izdelke.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2024
Varovala sluha - Preskušanje - 3. del: Dodatna akustična preskusna metoda
(vključuje dopolnilo A1)
Hearing protectors - Testing - Part 3: Supplementary acoustic test methods
Gehörschützer - Prüfung - Teil 3: Zusätzliche akustische Prüfverfahren
Protecteurs individuels contre le bruit - Essais - Partie 3 : Méthodes d'essais
acoustiques supplémentaires
Ta slovenski standard je istoveten z: EN 13819-3:2019+A1:2024
ICS:
13.340.20 Varovalna oprema za glavo Head protective equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 13819-3:2019+A1
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2024
EUROPÄISCHE NORM
ICS 13.340.20 Supersedes EN 13819-3:2019
English Version
Hearing protectors - Testing - Part 3: Supplementary
acoustic test methods
Protecteurs individuels contre le bruit - Essais - Partie Gehörschützer - Prüfung - Teil 3: Zusätzliche
3 : Méthodes d'essais acoustiques supplémentaires akustische Prüfverfahren
This European Standard was approved by CEN on 13 December 2018 and includes Amendment 1 approved by CEN on 10 April
2023.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13819-3:2019+A1:2023 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Symbols and abbreviations . 9
5 Test conditioning and equipment . 9
5.1 Conditioning and testing atmosphere . 9
5.2 Occluded-ear simulator . 9
5.3 Head simulator . 9
5.4 Microphone in Real Ear (MIRE) . 9
6 Test signals . 10
6.1 General . 10
6.2 HML test sounds . 10
6.3 Broadband noise test sound . 10
6.4 Speech signal . 10
6.5 Entertainment audio test signal . 11
7 Test procedures . 11
7.1 General . 11
7.2 Level-dependent hearing protectors . 11
7.2.1 Introduction . 11
7.2.2 Level-dependent earmuff . 11
7.2.3 Level-dependent earplug . 12
7.3 Active noise reduction (ANR) hearing protectors . 14
7.3.1 General . 14
7.3.2 Earmuff with active noise reduction . 15
7.4 Hearing protectors with FM radio receiver or DAB/DAB+ radio receiver" . 16
7.4.1 General . 16
7.4.2 Earmuff with FM radio receiver or DAB/DAB+ radio receiver" . 17
7.4.3 Earplug with FM radio receiver or DAB/DAB+ radio receiver" . 18
7.5 Hearing protectors with Bluetooth® receiver . 20
7.5.1 Earmuff with Bluetooth® receiver . 20
7.5.2 Earplug with Bluetooth® receiver . 23
7.6 Hearing protectors with electrical audio input. 25
7.6.1 Earmuff with electrical audio input. 25
7.6.2 Earplug with electrical audio input . 27
7.7 Hearing protectors with built-in two-way radio. 29
7.7.1 Earmuff with built-in analogue frequency modulated two-way radio . 29
7.7.2 Earplug with built-in analogue frequency modulated two-way radio . 31
Annex A (informative) Overview of supplementary acoustic test methods . 33
Annex B (normative) HML test sounds and pink noise with Lp,A = 100 dB and tolerances . 34
Annex C (informative) Calculation example for level-dependent hearing protectors . 36
C.1 Calculation example for level-dependent earmuff . 36
C.2 Calculation example for level-dependent earplugs . 37
Annex D (informative) Calculation example for ANR . 38
Annex E (informative) Uncertainty of measurement and interpretation of test results . 39
Bibliography . 41
European foreword
This document (EN 13819-3:2019+A1:2024) has been prepared by Technical Committee CEN/TC 159
“Hearing protectors”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2024, and conflicting national standards shall
be withdrawn at the latest by October 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document includes Amendment 1 approved by CEN on 10 April 2023.
This document supersedes !EN 13819-3:2019".
The start and finish of text introduced or altered by amendment is indicated in the text by tags !".
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Introduction
This standard is part of a set of standards for personal hearing protectors.
The EN 13819 series consists of three parts and deals with testing plans of hearing protectors.
— EN 13819-1, Hearing protectors — Testing — Part 1: Physical test methods
— EN 13819-2, Hearing protectors — Testing — Part 2: Acoustic test methods
— EN 13819-3, Hearing protectors — Testing — Part 3: Supplementary acoustic test methods
The product requirements are described in a family of standards:
— EN 352-1, Hearing protectors — General requirements — Part 1: Earmuffs
— EN 352-2, Hearing protectors — General requirements — Part 2: Earplugs
— EN 352-3, Hearing protectors — General requirements — Part 3: Earmuffs attached to head
protection and/or face protection devices
— EN 352-4, Hearing protectors — Safety requirements — Part 4: Level-dependent earmuffs
— EN 352-5, Hearing protectors — Safety requirements — Part 5: Active noise reduction earmuffs
— EN352-6, Hearing protectors — Safety requirements — Part 6: Earmuffs with safety-related audio
input
— EN 352-7, Hearing protectors — Safety requirements — Part 7: Level-dependent earplugs
— EN 352-8, Hearing protectors —Safety requirements — Part 8: Entertainment audio earmuffs
— EN 352-9, Hearing protectors — Safety requirements — Part 9: Earplugs with safety-related audio
input
— EN 352-10, Hearing protectors — Safety requirements — Part 10: Entertainment audio earplugs
This standard also provides informative spreadsheets with
— calculation examples for level-dependent earplugs
— calculation examples for ANR
to allow the user to make own calculations.
CEN is not responsible for errors that may arise or occur with the use of these spreadsheets.
An associated standard, EN 458, covers selection, use, care and maintenance of hearing protectors.
1 Scope
This document specifies supplementary acoustic test methods for hearing protectors with additional
electronic functions. The purpose of these tests is to enable assessment of the hearing protector
performance as specified in the appropriate product standards.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
!EN 352-2:2020, Hearing protectors — General requirements — Part 2: Earplugs
EN 352-8:2020+A1:2024, Hearing protectors — Safety requirements — Part 8: Entertainment audio
earmuffs
EN 352-10:2020+A1:2024, Hearing protectors — Safety requirements — Part 10: Entertainment audio
earplugs"
EN 60318-4:2010, Electroacoustics — Simulators of human head and ear — Part 4: Occluded-ear
simulator for the measurement of earphones coupled to the ear by means of ear inserts
(IEC 60318-4:2010)
EN ISO 4869-1:2018, Acoustics — Hearing protectors — Part 1: Subjective method for the measurement
of sound attenuation (ISO 4869-1:2018)
EN ISO 4869-2:2018, A
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.