EN 352-6:2020+A1:2024
(Main + Amendment)Hearing protectors - Safety requirements - Part 6: Earmuffs with safety-related audio input
Hearing protectors - Safety requirements - Part 6: Earmuffs with safety-related audio input
This document is applicable to earmuffs supplemented by a safety-related audio input. The audio signal can be transmitted by electrical input or other communication like Bluetooth . It specifies requirements on construction, design, performance, marking and user information related to the inclusion of the safety-related audio input.
Earmuffs with safety-related audio input are designed to provide speech information and warning signals, while providing attenuation of external sound. They may be selected for use in a number of different environments, for example in air traffic communication, in the police forces, in the broadcasting and entertainment industries.
Gehörschützer - Sicherheitstechnische Anforderungen - Teil 6: Kapselgehörschützer mit sicherheitsrelevantem Audioinput
Dieses Dokument ist anzuwenden für Kapselgehörschützer, die mit einem sicherheitsrelevanten Audioinput ausgestattet sind. Das Audiosignal kann über einen elektrischen Eingang oder andere Kommunikationssysteme, wie Bluetooth , übertragen werden. Es legt für die Integration des sicherheitsrelevanten Audioinputs Anforderungen hinsichtlich Konstruktion, Gestaltung, Leistung, Kennzeichnung und Benutzerinformationen fest.
Kapselgehörschützer mit sicherheitsrelevantem Audioinput haben die Aufgabe, Sprachinformationen und Warnsignale wiederzugeben während Umgebungsgeräusche gedämmt werden. Sie können in einer ganzen Reihe von Arbeitssituationen Verwendung finden, z. B. im Bereich der Luftverkehrskommunikation, bei der Polizei sowie in der Rundfunk- und Unterhaltungsindustrie.
Protecteurs individuels contre le bruit - Exigences de sécurité et essais - Partie 6 : Serre-tête avec entrée audio
Le présent document est applicable aux serre-tête avec en supplément une entrée audio de sécurité. Ce signal audio peut être transmis par entrée électrique ou par tout autre moyen de communication tel que le Bluetooth . Il spécifie les exigences en matière de construction, de conception, de performances et de marquage ainsi que les informations destinées à l'utilisateur pour ce qui concerne l'incorporation de l'entrée audio de sécurité.
Les serre-tête avec entrée audio de sécurité sont conçus pour restituer des informations orales et des signaux d'avertissement tout en assurant l'affaiblissement des sons externes. Ils peuvent être utilisés dans différents environnements de travail, dans les communications aériennes, par les forces de police, par les professionnels de la radiodiffusion et du spectacle.
Varovala sluha - Varnostne zahteve - 6. del: Naušniki z varnostnim avdio vhodom
Ta dokument se uporablja za naušnike z varnostnim avdio vhodom. Zvočni signal se lahko prenaša prek električnega vhoda ali druge vrste komunikacije (npr. Bluetooth). Določa zahteve glede izdelave, zasnove, delovanja, označevanja in informacij za uporabnike v zvezi z vključitvijo varnostnega avdio vhoda.
Naušniki z varnostnim zvočnim vhodom so zasnovani za zagotavljanje govorjenih informacij in opozorilnih signalov ter dušenje zunanjega zvoka. Uporabljajo se lahko v različnih okoljih (npr. obveščanje o zračnem prometu, policija, radiodifuzijsko oddajanje in zabavna industrija).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2024
Varovala sluha - Varnostne zahteve - 6. del: Naušniki z varnostnim avdio vhodom
Hearing protectors - Safety requirements - Part 6: Earmuffs with safety-related audio
input
Gehörschützer - Sicherheitstechnische Anforderungen - Teil 6: Kapselgehörschützer mit
sicherheitsrelevantem Audioinput
Protecteurs individuels contre le bruit - Exigences de sécurité et essais - Partie 6 : Serre-
tête avec entrée audio
Ta slovenski standard je istoveten z: EN 352-6:2020+A1:2024
ICS:
13.340.20 Varovalna oprema za glavo Head protective equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 352-6:2020+A1
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2024
EUROPÄISCHE NORM
ICS 13.340.20 Supersedes EN 352-6:2020
English Version
Hearing protectors - Safety requirements - Part 6:
Earmuffs with safety-related audio input
Protecteurs individuels contre le bruit - Exigences de Gehörschützer - Sicherheitstechnische Anforderungen
sécurité et essais - Partie 6 : Serre-tête avec entrée - Teil 6: Kapselgehörschützer mit
audio sicherheitsrelevantem Audioinput
This European Standard was approved by CEN on 18 June 2018 and includes Amendment 1 approved by CEN on 27 February
2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 352-6:2020+A1:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Requirements . 6
4.1 General . 6
4.2 Sound output levels and criterion input signal . 6
5 Marking . 6
6 Manufacturer's instructions and information . 6
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Regulation (EU) 2016/425 of the European Parliament and of the
Council of 9 March 2016 on personal protective equipment aimed to be covered. 8
Bibliography . 9
European foreword
This document (EN 352-6:2020+A1:2024) has been prepared by Technical Committee CEN/TC 159
“Hearing protectors”, the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2024, and conflicting national standards shall
be withdrawn at the latest by April 2027.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document includes Amendment 1 approved by CEN on 27 February 2024.
This document supersedes !EN 352-6:2020".
The start and finish of text introduced or altered by amendment is indicated in the text by tags !".
This document has been prepared under a standardization request given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements of
EU Regulation(s).
For relationship with EU Regulation(s), see informative Annex ZA, which is an integral part of this
document.
!deleted text"
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Introduction
The requirements of the standard are concerned with the safety-related audio input performance of the
earmuffs. Sound output levels and criterion input signals are reported in the user information.
EN 352-6 is part of a family of standards describing product requirements:
— EN 352-1, Hearing protectors — General requirements — Part 1: Earmuffs
— EN 352-2, Hearing protectors — General requirements — Part 2: Earplugs
— EN 352-3, Hearing protectors — General requirements — Part 3: Earmuffs attached to head
protection and/or face protection devices
— EN 352-4, Hearing protectors — Safety requirements — Part 4: Level-dependent earmuffs
— EN 352-5, Hearing protectors — Safety requirements — Part 5: Active noise reduction earmuffs
— EN 352-6, Hearing protectors — Safety requirements — Part 6: Earmuffs with safety-related audio
input
— EN 352-7, Hearing protectors — Safety requirements — Part 7: Level-dependent earplugs
— EN 352-8, Hearing protectors — Safety requirements — Part 8: Entertainment audio earmuffs
— EN 352-9, Hearing protectors — Safety requirements — Part 9: Earplugs with safety-related audio
input
— EN 352-10, Hearing protectors — Safety requirements — Part 10: Entertainment audio earplugs
Test methods for these requirements are described in the following standards:
— EN 13819-1, Hearing protectors — Testing — Part 1: Physical test methods
— EN 13819-2, Hearing protectors — Testing — Part 2: Acoustic test methods
—
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.