EN ISO 10286:2021

SLOVENSKI STANDARD
01-januar-2022
Nadomešča:
SIST EN ISO 10286:2015
Plinske jeklenke - Terminologija (ISO 10286:2021)
Gas cylinders - Vocabulary (ISO 10286:2021)
Gasflaschen - Vokabular (ISO 10286:2021)
Bouteilles à gaz - Vocabulaire (ISO 10286:2021)
Ta slovenski standard je istoveten z: EN ISO 10286:2021
ICS:
01.040.23 Tekočinski sistemi in sestavni Fluid systems and
deli za splošno rabo (Slovarji) components for general use
(Vocabularies)
23.020.35 Plinske jeklenke Gas cylinders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 10286
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2021
EUROPÄISCHE NORM
ICS 01.040.23; 23.020.35 Supersedes EN ISO 10286:2015
English Version
Gas cylinders - Vocabulary (ISO 10286:2021)
Bouteilles à gaz - Vocabulaire (ISO 10286:2021) Gasflaschen - Vokabular (ISO 10286:2021)
This European Standard was approved by CEN on 25 October 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 10286:2021 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 10286:2021) has been prepared by Technical Committee ISO/TC 131 "Fluid
power systems" in collaboration with Technical Committee CEN/TC 23 “Transportable gas cylinders”
the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2022, and conflicting national standards shall be
withdrawn at the latest by May 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 10286:2015.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 10286:2021 has been approved by CEN as EN ISO 10286:2021 without any modification.

INTERNATIONAL ISO
STANDARD 10286
Fifth edition
2021-11
Gas cylinders — Vocabulary
Gasflaschen — Vokabular
Bouteilles à gaz — Vocabulaire
Reference number
ISO 10286:2021(E)
ISO 10286:2021(E)
© ISO 2021
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 10286:2021(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 Terms related to pressure receptacles . 1
3.1.1 All pressure receptacles . 1
3.1.2 All gas cylinders . 4
3.1.3 Composite gas cylinders . 4
3.1.4 Acetylene cylinders . 4
3.1.5 Bundles of cylinders, battery vehicles and MEGC . 5
3.2 Terms related to accessories . 6
3.3 Terms related to manufacture . . 10
3.4 Terms related to testing and inspection . 11
3.5 Terms related to characteristics, properties and pressures .13
Annex A (informative) Pressure system for pressure receptacles .19
Annex B (informative) Terms of Clause 3 and additional terminology — Equivalent terms
in French and German .20
Annex C (informative) Figures related to the additional terminology given in Annex B .37
Bibliography .50
iii
ISO 10286:2021(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO’s adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 58, Gas cylinders, in collaboration with
the European Committee for Standardization (CEN) Technical Committee CEN/TC 23, Transportable gas
cylinders, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna
Agreement).
This fifth edition cancels and replaces the fourth edition (ISO 10286:2015), of which it constitutes a
minor revision. The changes are as follows:
— changes to the formatting and structure throughout;
— editorial changes to fully align with the rules in ISO/IEC Directives Part 2.
In addition to text written in the official ISO languages (English, French), this document gives text in
German. This text is published under the responsibility of the Member Body for Germany (DIN) and is
given for information only. Only the text given in the official languages can be considered as ISO text.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
ISO 10286:2021(E)
Introduction
The terms and definitions in this document are given in the following layout:
preferred term(s) in bold typeface
admitted term(s) or synonyms, in normal typeface
DEPRECATED: deprecated term deprecated term(s), in normal typeface, with the designation
“DEPRECATED”:
definition the definition, where available, in normal typeface
Note 1 to entry: notes to entry, cross-references and examples.
Figures/non-verbal representations
The terms in this document are sorted in systematic order as far as possible. Further guidance on
terminological presentation can be found in ISO 10241-1.
The definitions support the understanding of the terms used in this document. They have been prepared
with due regard to possible uses in different fields related to gas cylinders. However, it is possible that
they will require adaption for particular uses.
Within this document, the term “ADR” is for simplification used as to also include similar regulations
such as RID and ADN, where appropriate.
[4]
This document has been written so that it is suitable to be referenced in the UN Model Regulations .
Table 1 shows a hierarchical overview of pressure receptacles according to the UN Model Regulations.
Annex A shows the different pressures for pressure receptacles in relation to each other.
Annex B shows a table including equivalent terms for additional terminology.
Annex C shows figures related to the additional terminology given in Annex B.
Terms given in square brackets are not within the scope of this document. They are shown for
information only.
v
ISO 10286:2021(E)
vi
Table 1 — Hierarchical overview of terms for pressure receptacles
small pressure receptacle
receptacle
containing
MEGC
gas (gas
[metal-
battery (multiple-
salvage [closed a
cartridge) [tank ]
pressure bundle of hydride
d
vehicle element gas
cylinder tube pressure cryogenic
drum cylinders storage
b
and container)
receptacle receptacle ]
c
system ]
aerosol
dispenser
a
In scope of CEN/TC 296 and CEN/TC 286.
b
In scope of ISO/TC 220.
c
In scope of ISO/TC 197.
d
This designation is used in the ADR.
NOTE  Within this document, for simplification, the use of
...