EN 476:1997
(Main)General requirements for components used in discharge pipes, drains and sewers for gravity systems
General requirements for components used in discharge pipes, drains and sewers for gravity systems
This European standard specifies general requirements for components such as pipes, fitting, and manholes with their respective joints intended for use in discharge pipes, drains and sewers which operate as gravity systems where any pressure likely to occur is a maximum of 40 kPa. This European standard providesthe general basis for the preparation or revision of product standards. It is not applicable for the evaluation of products.
Allgemeine Anforderungen an Bauteile für Abwasserkanäle und -leitungen für Schwerkraftentwässerungssysteme
Diese Europäische Norm legt allgemeine Anforderungen an Bauteile wie Rohre, Formstück und Schächte mit ihren jeweiligen Verbindungen fest, die für Ab- wasserkanäle und -leitungen bestimmt sind. Diese Abwasserkanäle und -leitungenwerden als Schwerkraftenwässerungssysteme mit einem größtmöglichen Druck von40 kPa betrieben. Diese Norm dient als allgemeine Grundlage für die Ausarbeitung oder Überarbeitung von Produktnormen. Sie gilt nicht für die Bewertung von Produkten.
Prescriptions générales pour les composants utilisés dans les réseaux d'évacuation, de branchement et d'assainissement à écoulement libre
La présente norme établit les prescriptions générales applicables aux composantstels que les tuyaux, les raccords ou pièces spéciales et les regards avec leurs assemblages respectifs, destinés à être utilisés dans les réseaux d'évacuation de branchement et d'assainissement, ceux-ci fonctionnant comme des réseaux à écoulement libre dans lesquels généralement aucune pression susceptible de se produire ne dépasse 40 kPa. La présente norme constitue la base générale pour lapréparation ou la révision des normes de produits. Elle ne s'applique pas à l'évaluation des produits.
Splošne zahteve za elemente težnostnih cevnih sistemov za odvod odpadne vode
General Information
- Status
- Withdrawn
- Publication Date
- 22-Jul-1997
- Withdrawal Date
- 11-Jan-2011
- Technical Committee
- CEN/TC 165 - Waste water engineering
- Drafting Committee
- CEN/TC 165/WG 1 - General requirements for pipes
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 12-Jan-2011
- Completion Date
- 12-Jan-2011
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 15-Jan-2011
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
NSF International
Global independent organization facilitating standards development and certification.
Kiwa BDA Testing
Building and construction product certification.
Sponsored listings
Frequently Asked Questions
EN 476:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "General requirements for components used in discharge pipes, drains and sewers for gravity systems". This standard covers: This European standard specifies general requirements for components such as pipes, fitting, and manholes with their respective joints intended for use in discharge pipes, drains and sewers which operate as gravity systems where any pressure likely to occur is a maximum of 40 kPa. This European standard providesthe general basis for the preparation or revision of product standards. It is not applicable for the evaluation of products.
This European standard specifies general requirements for components such as pipes, fitting, and manholes with their respective joints intended for use in discharge pipes, drains and sewers which operate as gravity systems where any pressure likely to occur is a maximum of 40 kPa. This European standard providesthe general basis for the preparation or revision of product standards. It is not applicable for the evaluation of products.
EN 476:1997 is classified under the following ICS (International Classification for Standards) categories: 13.060.30 - Sewage water. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 476:1997 has the following relationships with other standards: It is inter standard links to EN 476:2011, EN 13598-2:2009, EN 13598-1:2010, EN 13508-2:2003+A1:2011, EN 752:2008. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 476:1997 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC, 93/38/EEC; Standardization Mandates: M/BC/CEN/88/15. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 476:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-1997
Splošne zahteve za elemente težnostnih cevnih sistemov za odvod odpadne vode
General requirements for components used in discharge pipes, drains and sewers for
gravity systems
Allgemeine Anforderungen an Bauteile für Abwasserkanäle und -leitungen für
Schwerkraftentwässerungssysteme
Prescriptions générales pour les composants utilisés dans les réseaux d'évacuation, de
branchement et d'assainissement a écoulement libre
Ta slovenski standard je istoveten z: EN 476:1997
ICS:
13.060.30 Odpadna voda Sewage water
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...