EN 832:1998/AC:2000 - Thermal performance of buildings

Thermal performance of buildings - Calculation of energy use for heating - Residential buildings

TC - Various editorial mistakes

Wärmetechnisches Verhalten von Gebäuden - Berechnung des Heizenergiebedarfs - Wohngebäude

Performance thermique des bâtiments - Calcul des besoins d'énergie pour le chauffage - Bâtiments résidentiels

Toplotne karakteristike stavb - Izračun potrebne energije za ogrevanje - Stanovanjske stavbe

General Information

Status: Withdrawn
Publication Date: 10-May-2000
Withdrawal Date: 29-Feb-2008

ICS: 91.140.10 - Central heating systems

Technical Committee: CEN/TC 89 - Thermal performance of buildings and building components
Drafting Committee: CEN/TC 89 - Thermal performance of buildings and building components

Current Stage: 9960 - Withdrawal effective - Withdrawal
Start Date: 01-Mar-2008
Completion Date: 01-Mar-2008

Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
Directive: 89/106/EEC - Construction products

Ref Project: SIST EN 832:1999/AC:2001 - Thermal performance of buildings - Calculation of energy use for heating - Residential buildings

Relations

Replaced By: EN ISO 13790:2008 - Energy performance of buildings - Calculation of energy use for space heating and cooling (ISO 13790:2008)
Effective Date: 22-Dec-2008

Corrects: EN 832:1998 - Thermal performance of buildings - Calculation of energy use for heating - Residential buildings
Effective Date: 22-Dec-2008

Corrigendum

EN 832:1999/AC:2001

English language

4 pages

Preview

e-Library read for

AI-Chat

1 day

Create e-Library subscription and get permanent access to the document. Subscriptions are available for: 91 91.140 91.140.10

Frequently Asked Questions

What is EN 832:1998/AC:2000?

EN 832:1998/AC:2000 is a corrigendum published by the European Committee for Standardization (CEN). Its full title is "Thermal performance of buildings - Calculation of energy use for heating - Residential buildings". This standard covers: TC - Various editorial mistakes

What is the scope of EN 832:1998/AC:2000?

TC - Various editorial mistakes

What ICS categories does EN 832:1998/AC:2000 belong to?

EN 832:1998/AC:2000 is classified under the following ICS (International Classification for Standards) categories: 91.140.10 - Central heating systems. The ICS classification helps identify the subject area and facilitates finding related standards.

What standards are related to EN 832:1998/AC:2000?

EN 832:1998/AC:2000 has the following relationships with other standards: It is inter standard links to EN ISO 13790:2008, EN 832:1998. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

Is EN 832:1998/AC:2000 a harmonized European standard?

EN 832:1998/AC:2000 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

How can I purchase EN 832:1998/AC:2000?

You can purchase EN 832:1998/AC:2000 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.

Standards Content (Sample)

EN 832:1999/AC:2001

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Wärmetechnisches Verhalten von Gebäuden - Berechnung des Heizenergiebedarfs - WohngebäudePerformance thermique des bâtiments - Calcul des besoins d'énergie pour le chauffage - Bâtiments résidentielsThermal performance of buildings - Calculation of energy use for heating - Residential
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

CEN

EN ISO 52016-1:2017(Main)

Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 1: Calculation procedures (ISO 52016-1:2017)

SIST EN ISO 52016-1:2017

ISO 52016-1:2017 specifies calculation methods for the assessment of:
a)    the (sensible) energy need for heating and cooling, based on hourly or monthly calculations;
b)    the latent energy need for (de-)humidification, based on hourly or monthly calculations;
c)    the internal temperature, based on hourly calculations;
d)    the sensible heating and cooling load, based on hourly calculations;
e)    the moisture and latent heat load for (de-)humidification, based on hourly calculations;
f)    the design sensible heating or cooling load and design latent heat load using an hourly calculation interval;
g)   the conditions of the supply air to provide the necessary humidification and dehumidification.
The calculation methods can be used for residential or non-residential buildings, or a part of it, referred to as "the building" or the "assessed object".
ISO 52016-1:2017 also contains specifications for the assessment of thermal zones in the building or in the part of a building. The calculations are performed per thermal zone. In the calculations, the thermal zones can be assumed to be thermally coupled or not.
The calculation methods have been developed for the calculation of the basic energy loads and needs, without interaction with specific technical building systems, and for the calculation of the system specific energy loads and needs, including the interaction with specific systems. The hourly calculation procedures can also be used as basis for calculations with more extensive system control options.
ISO 52016-1:2017 is applicable to buildings at the design stage, to new buildings after construction and to existing buildings in the use phase.
NOTE  Table 1 in the Introduction shows the relative position of ISO 52016-1:2017 within the set of EPB standards in the context of the modular structure as set out in ISO 52000-1.

Standard
216 pages
English language
e-Library read for
AI-Chat
1 day
Standard – translation
227 pages
Slovenian language
e-Library read for
AI-Chat
1 day

18-Jul-2017
30-Jan-2018
91.120.10
91.140.10
2010/31/EU
M/480
CEN/TC 89

CEN

EN 17691-1:2025(Main)

Components for BAC control loops - Valve and actuator assemblies - Part 1: Water-based HVAC applications

SIST EN 17691-1:2026

This document specifies requirements and test methods of valve-actuator assemblies in individual zone control of water-based HVAC applications.
This document does not apply to control valves of nominal diameter larger than DN50.
This document is applicable to pressure independent and pressure dependent control valve-actuator assemblies of relevant categories: 2-port, 3-port and 6-port valves (if they incorporate a control valve function).
Where a certain control loop as a combination of controller and valve-actuator assembly was assessed under EN 15500-1 [3], this document allows the assessment of the performance of combinations of that controller with different valve-actuator assemblies. The tests in this document ensure that valve/actuator assemblies, as components of control loops, can be replaced with products that provide comparable or better performance.
In hydronic system, valve-actuator assembly is a component of control loop that controls water flow rate according to the application control demand.

Draft
24 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 15316-5:2025(Main)

Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 5: Space heating and DHW storage systems (not cooling), Module M3-7, M8-7

SIST EN 15316-5:2025

This document specifies energy performance calculation of water based storage sub-systems used for heating, for domestic hot water or for combination of these.
This document does not apply to sizing or inspection of such storage systems.
Table 1 shows the relative position of this document within the set of EPB standards in the context of the modular structure as set out in EN ISO 52000-1.
NOTE 1 In CEN ISO/TR 52000-2, the same table can be found with, for each module, the numbers of the relevant EPB standards and accompanying Technical Reports that are published or in preparation.
NOTE 2 The modules represent EPB standards, although one EPB standard may cover more than one module and one module may be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.
Table 1 - Position of this document within the modular structure of the set of EPB standards
[...table not reproduced...]

Standard
50 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 14336:2025(Main)

Heating systems in buildings - Installation and commissioning of water based heating and cooling systems

SIST EN 14336:2025

This document specifies the requirements for the installation and commissioning of water-based heating, water-based cooling, and heating of domestic hot water (DHW) systems in buildings with a maximum operating temperature of 105 °C.
This document is applicable to the commissioning of systems as a whole, in cases of new systems, renovations and replacement of equipment.
This document does not apply to superheated water systems or steam systems and it does not apply to the specific commissioning requirements for individual components (e.g. how to set fuel/air ratio on a burner). Also, it does not apply to the installation or commissioning of attached systems (e.g. air conditioning, domestic hot water distribution, ventilation systems).
This document specifies only technical requirements but it does not specify any commercial or contractual arrangements between parties.

Standard
68 pages
English language
e-Library read for
AI-Chat
1 day

03-Jun-2025
91.140.10
CEN/TC 228

CEN

EN 17692:2025(Main)

Central heating boilers - Specification for indirectly heated unvented (closed) pressurized buffer tanks - Requirements, testing and marking

SIST EN 17692:2025

This document specifies the essential terms, constructional requirements, tests, energy assessment and marking of indirectly heated water storage tanks for primary water (buffer tanks), with a capacity not exceeding 2,000 l, an operating temperature not exceeding 95 °C, and an operating pressure not exceeding 1,0 MPa (10 bar).
This document covers metallic and plastic made buffer tanks.
Although this document does not consider any buffer tanks mainly intended for direct firing, it allows for the provision of electric heating elements for auxiliary purposes.
NOTE The energy assessment is performed by EN 15332 or EN 12897.

Standard
22 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 15502-2-1:2022+A1:2023/AC:2024(Corrigendum)

Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW

SIST EN 15502-2-1:2022+A1:2024/AC:2025

Corrigendum
2 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 15502-2-2:2024(Main)

Gas-fired central heating boilers - Part 2-2: Specific standard for type B1 appliances

SIST EN 15502-2-2:2025

This document specifies, the requirements and test methods concerning the classification and marking of gas-fired central heating boilers that are fitted with atmospheric burners, fan assisted atmospheric burners and are hereafter referred to as “boilers”.
Where the word boiler is used, this is intended to be read as the boiler including its connecting ducts, ducts and terminals, if any.
This document covers gas-fired central heating boilers type B11, B11BS, B12, B12BS, B13, B13BS:
NOTE 1   For further background information on appliance types see EN 1749:2020.
a)   that have a nominal heat input (on the basis of net calorific value) not exceeding 70 kW;
b)   that use one or more combustible gases of the three gas families at the pressures stated in EN 437:2021;
c)   where the temperature of the heat transfer fluid does not exceed 105 °C during normal operation;
d)   where the maximum operating pressure in the water circuit does not exceed 6 bar;
e)   which are declared in the technical instructions to be either a “low temperature boiler” or a “standard boiler”. If no declaration is given the boiler is to be considered a “standard boiler”;
f)   which are intended to be installed inside a building or in a partially protected place;
g)   which are intended to produce also hot water either by the instantaneous or storage principle, as a single unit;
h)   which are designed for either sealed water systems or for open water systems.
NOTE 2   This document provides requirements for boilers with known constructions. For boilers with any alternative constructions, which might not fully be covered by this document, the risk associated with this alternative construction needs to be assessed.
An example of an assessment methodology, based upon risk assessment, is given in Clause 11.
This document does not cover all the requirements for:
aa)   appliances that are intended to be connected to gas grids where the quality of the distributed gas is likely to vary to a large extent over the lifetime of the appliance (see Annex AB);
ab)   appliances using flue dampers;
ac)   appliances that have a nominal heat input (on the basis of net calorific value) exceeding 70 kW;
ad)   appliances of the types A, B14, B¬2, B3, B4, B5 and C;
ae)   appliances intended to be connected to a (common) flue having mechanical extraction;
af)   appliances with gas/air ratio control;
ag)   modular boilers;
ah)   boilers which can give rise to condensation under certain circumstances;
ai)   boilers intended to be installed in a room with a foreseeable negative pressure relative to the pressure in the flue system;
aj)   surface temperatures of external parts particular to children and elderly people;
ak)   appliances that are intended to burn natural gases of the second family where hydrogen is added to the natural gas;
al)   boilers intended to be installed in areas accessible to elderly people and children;
am)   boilers equipped with an adaptive combustion control function (ACCF).
NOTE   Negative pressure relative to the pressure in the flue system can for example be caused by mechanical or thermal ventilation in airtight buildings.

Standard
55 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 17956:2024(Main)

Energy efficiency classes for technical insulation systems - Calculation method and applications

SIST EN 17956:2024

This document is applicable to technical insulation systems of operational installations in industry and the building services, such as pipes, ducts, vessels, equipment and built-in components.
The document specifies methods for the energy efficiency classification of insulation systems for the abovementioned components with an operational temperature range of −30 °C up to 650 °C.
The document addresses plant operators, engineers of operational installations, as well as the involved contractors such as insulation contractors and pipefitting contractors.
The design of safe surface temperatures for personal protection, as well as the prevention of condensation, is outside the scope of this document.
This document also does not apply to water-based heating and cooling systems in buildings and does not apply to directly buried district heating and district cooling pipes.

Standard
29 pages
English language
e-Library read for
AI-Chat
1 day

CEN

CEN/TS 15502-3-1:2024(Main)

Gas-fired central heating boilers - Part 3-1: H2NG and ACCF - Expansion of EN 15502-2-1:2022

SIST-TS CEN/TS 15502-3-1:2025

Scope of CEN/TS 15502-3-1
EN 15502-2-1:2022, Clause 1 applies with the following modifications:
Add after k):
l) which are fully premixed appliances equipped with an Adaptive Combustion Control Function (ACCF) that are intended to be connected to gas grids where the quality of the distributed gas is likely to vary to a large extent over the lifetime of the appliance including gas grids for natural gases of the second family where up to 20% hydrogen volume is added to the natural gas (H2NG-Y20).
m) which are fully premixed appliances equipped with a Pneumatic Gas Air Ratio controller (PGAR) that are intended to be connected to gas grids for natural gases of the second family where up to 20% hydrogen volume is added to the natural gas (H2NG-Y20), where the quality of the distributed gas without adding the hydrogen is not likely to vary to a large extent over the lifetime of the appliance.
Replace ab) and ak) and al) by the following:
ab) appliances that are intended to be connected to gas grids where the quality of the distributed gas is likely to vary to a large extent over the lifetime of the appliance (see Annex AB of EN 15502-1:2021), except for fully premixed appliances with a ACCF, as ACCF appliances are designed to adapt to variations in gas quality.
ak) appliances that are intended to burn natural gases of the second family where hydrogen is added to the natural gas, except for fully premixed appliances with a ACCF or PGAR (which are covered by this document);
al) Partially premixed appliances equipped with an adaptive combustion control function (ACCF).

Technical specification
59 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 15502-2-1:2022+A1:2023(Main)

Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW

SIST EN 15502-2-1:2022+A1:2024

This document specifies the requirements and test methods, as well as the classification and marking of gas-fired central heating boilers that are fitted with atmospheric burners, fan assisted atmospheric burners or fully premixed burners, and are hereafter referred to as "boilers".
This document is intended to be used in conjunction with EN 15502-1:2021.
This document covers gas-fired central heating boilers from the types C1 up to C(11) and the types B2, B3 and B5:
NOTE 1   For further background information on appliance types see EN 1749:2020.
a)   that have a nominal heat input (on the basis of net calorific value) not exceeding 1 000 kW;
b)   that use one or more combustible gases of the three gas families at the pressures stated in EN 437:2021;
c)   where the temperature of the heat transfer fluid does not exceed 105 °C during normal operation;
d)   where the maximum operating pressure in the water circuit does not exceed 6 bar;
e)   which can give rise to condensation under certain circumstances;
f)   which are declared in the instructions for installation to be either a "condensing" boiler or a "low temperature boiler" or a "standard boiler"; if no declaration is given the boiler is to be considered a "standard boiler";
g)   which are intended to be installed inside a building or in a partially protected place;
h)   which are intended to produce also hot water either by the instantaneous or storage principle as a single unit;
i)   which are designed for either sealed water systems or for open water systems;
j)   which are either modular boilers, or non-modular boilers.
k)   which are from the types C(10) that are equipped with a gas-air ratio control and that have a ∆pmax, saf(min) of 25 Pa, and C(11) that have condensing boiler modules that are equipped with a gas-air ratio control and that have a ∆pmax, saf(min) of 25 Pa.
NOTE 2   This document provides requirements for boilers with known constructions. For boilers with any alternative constructions, which might not fully be covered by this standard, the risk associated with this alternative construction needs to be assessed.
An example of an assessment methodology, based upon risk assessment, is given in Clause 11.
This document does not cover all the requirements for:
aa)   appliances above 1 000 kW;
ab)   appliances that are intended to be connected to gas grids where the quality of the distributed gas is likely to vary to a large extent over the lifetime of the appliance (see Annex AB of EN 15502-1:2021);
ac)   appliances using flue dampers;
ad)   appliances of the types B21, B31, B51, C21, C41, C51, C61, C71, C81, C(12) and C(13);
ae)   C7 appliances that have a nominal heat input (on the basis of net calorific value) exceeding 70 kW;
af)   appliances incorporating flexible plastic flue liners;
ag)   C(10) boilers:
1)   without a gas-air ratio control, or
2)   which are non-condensing appliances, or
3)   which have a maximum safety pressure difference at minimum heat input not equal to 25 Pa (∆pmax, saf(min));
ah)   C(11) boilers that have boiler modules:
1)   without a gas-air ratio control, or
2)   which are non-condensing appliances, or
3)   which have a maximum safety pressure difference at minimum heat input not equal to 25 Pa (∆pmax, saf(min));
ai)   appliances intended to be connected to a flue having mechanical extraction;
aj)   surface temperatures of external parts particular to children and elderly people;
ak)   appliances that are intended to burn natural gases of the second family where hydrogen is added to the natural gas;
al)   appliances equipped with an adaptive combustion control function (ACCF);
am)   boilers intended to be installed in areas accessible to elderly people and children.

Standard
105 pages
English language
e-Library read for
AI-Chat
1 day

Thermal performance of buildings - Calculation of energy use for heating - Residential buildings

Wärmetechnisches Verhalten von Gebäuden - Berechnung des Heizenergiebedarfs - Wohngebäude

Performance thermique des bâtiments - Calcul des besoins d'énergie pour le chauffage - Bâtiments résidentiels

Toplotne karakteristike stavb - Izračun potrebne energije za ogrevanje - Stanovanjske stavbe

General Information

Relations

EN 832:1999/AC:2001

Frequently Asked Questions

Standards Content (Sample)

Questions, Comments and Discussion

This May Also Interest You