iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
ASTM

ASTM D123-15b

(Terminology)

Standard Terminology Relating to Textiles

Standard Terminology Relating to Textiles

SCOPE
1.1 This standard is the compilation of all terminology developed by Committee D13 on Textiles.  
1.1.1 This terminology, consists mostly of definitions, which are specific to the textile industry. Meanings of the same terms used outside the textile industry can be found in other compilations or in dictionaries of general usage.  
1.1.2 The specific D13 subcommittee (SC) which has jurisdictional responsibility for every item is the first attribution noted after the definition. The SC terminology standard in which all the terms and definitions appear is listed by number after the jurisdiction for the term. The wording of an entry cannot be changed without the approval of the subcommittee which has jurisdiction. Users of this compilation should also review the SC terminology standard listed for more details or interpretations of these terms and their use by the SC having jurisdiction.  
1.2 In addition to being a specialized dictionary, Terminology D123 is also a tool for managing the committee's terminology. This includes finding, eliminating, and preventing redundancies, that is, where two or more terms relating the same concept are defined in different words. Redundancies can also occur when one definition is used for two or more terms.  
1.3 While the review for clarity and form are the responsibility of the terminology subcommittee, the concept of managing terminology is the broad responsibility of every writer of standards, specifically the task group leader and subcommittee chairman.  
1.4 Subsequent to a listing of specific subcommittee compilations, this standard is comprised of the following sections that are listed in the order in which they appear.  
1.4.1 Alphabetical listing of terms with definitions followed by SC attribution in brackets and SC terminology standard.  
1.4.2 Annex A1 Terms Relating to the Hand of Fabrics.  
1.4.3 Annex A2 Industry Accepted Synonyms.  
1.4.4 Annex A3 Terminology Taken From D13 Standards That Have Been Withdrawn.  
1.4.5 Annex A4 Terminology Relating to Leather.  
1.4.6 Annex A5 Terminology Revision Procedures.  
1.4.7 Appendix X1 Other Sources of Textile Terminology.

General Information

Status
Historical
Publication Date
14-Sep-2015
ICS
01.040.59 - Textile and leather technology (Vocabularies)
59.080.01 - Textiles in general
Technical Committee
D13 - Textiles
Drafting Committee
D13.92 - Terminology
Current Stage
Ref Project

Relations

Replaces
ASTM D123-15a - Standard Terminology Relating to Textiles
Effective Date
15-Sep-2015
Referred By
ASTM D7268-23 - Standard Performance Specification for Seamless Knit Garments Including Intimates and Swimwear
Effective Date
15-Sep-2015
Referred By
ASTM D6775-13(2017) - Standard Test Method for Breaking Strength and Elongation of Textile Webbing, Tape and Braided Material
Effective Date
15-Sep-2015
Referred By
ASTM D7722-22 - Standard Terminology Relating to Assembly of Textile Structures
Effective Date
15-Sep-2015
Referred By
ASTM F2130-11(2018) - Standard Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials (Withdrawn 2023)
Effective Date
15-Sep-2015
Referred By
ASTM D6720-07(2018) - Standard Test Method for Evaluation of Recoverable Stretch of Stretch Yarns (Skein Method)
Effective Date
15-Sep-2015
Referred By
ASTM E2224-23a - Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
Effective Date
15-Sep-2015
Referred By
ASTM D2525-22 - Standard Practice for Sampling Wool for Moisture
Effective Date
15-Sep-2015
Referred By
ASTM D5823-19 - Standard Test Method for Tuft Height of Pile Floor Coverings
Effective Date
15-Sep-2015
Referred By
ASTM D8448/D8448M-22 - Standard Specification for Basalt Fiber Strands
Effective Date
15-Sep-2015
Referred By
ASTM D3181-15(2019) - Standard Guide for Conducting Wear Tests on Textiles
Effective Date
15-Sep-2015
Referred By
ASTM D2058-03(2022) - Standard Test Method for Durability of Finish of Zippers to Drycleaning
Effective Date
15-Sep-2015
Referred By
ASTM D2816-18 - Standard Test Method for Cashmere Coarse-Hair Content in Cashmere
Effective Date
15-Sep-2015
Referred By
ASTM D7017-20 - Standard Performance Specification for Water-Resistant Rainwear and All-Purpose, Water-Repellent Coat Fabrics
Effective Date
15-Sep-2015
Referred By
ASTM D6193-16(2020) - Standard Practice for Stitches and Seams
Effective Date
15-Sep-2015

Buy Standard

ASTM D123-15b - Standard Terminology Relating to TextilesASTM D123-15b - Standard Terminology Relating to Textiles
PreviousNext
Standard
ASTM D123-15b - Standard Terminology Relating to Textiles
English language
69 pages
sale 15% off
Preview
sale 15% off
Preview
REDLINE ASTM D123-15b - Standard Terminology Relating to TextilesREDLINE ASTM D123-15b - Standard Terminology Relating to Textiles
PreviousNext
Standard
REDLINE ASTM D123-15b - Standard Terminology Relating to Textiles
English language
69 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: D123 − 15b
StandardTerminology Relating to
1
Textiles
This standard is issued under the fixed designation D123; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the U.S. Department of Defense.
1. Scope 1.4.4 Annex A3 Terminology Taken From D13 Standards
That Have Been Withdrawn.
1.1 This standard is the compilation of all terminology
1.4.5 Annex A4 Terminology Relating to Leather.
developed by Committee D13 on Textiles.
1.4.6 Annex A5 Terminology Revision Procedures.
1.1.1 This terminology, consists mostly of definitions,
1.4.7 Appendix X1 Other Sources of Textile Terminology.
which are specific to the textile industry. Meanings of the same
terms used outside the textile industry can be found in other
2. Referenced Documents
compilations or in dictionaries of general usage.
2
2.1 ASTM Standards:
1.1.2 The specific D13 subcommittee (SC) which has juris-
D2050 Terminology Relating to Fasteners and Closures
dictional responsibility for every item is the first attribution
Used with Textiles
noted after the definition. The SC terminology standard in
D3136 Terminology Relating to Care Labeling for Apparel,
which all the terms and definitions appear is listed by number
Textile, Home Furnishing, and Leather Products
after the jurisdiction for the term. The wording of an entry
D3888 Terminology for Yarn Spinning Systems
cannot be changed without the approval of the subcommittee
D3990 Terminology Relating to Fabric Defects
which has jurisdiction. Users of this compilation should also
D4391 Terminology Relating to The Burning Behavior of
review the SC terminology standard listed for more details or
Textiles
interpretations of these terms and their use by the SC having
D4845 Terminology Relating to Wool
jurisdiction.
D4848 Terminology Related to Force, Deformation and
1.2 In addition to being a specialized dictionary, Terminol-
Related Properties of Textiles
ogy D123 is also a tool for managing the committee’s
D4849 Terminology Related to Yarns and Fibers
terminology.This includes finding, eliminating, and preventing
D4850 Terminology Relating to Fabrics and Fabric Test
redundancies, that is, where two or more terms relating the
Methods
same concept are defined in different words. Redundancies can
D4920 Terminology Relating to Conditioning, Chemical,
also occur when one definition is used for two or more terms.
and Thermal Properties
1.3 While the review for clarity and form are the responsi-
D5219 Terminology Relating to Body Dimensions for Ap-
bility of the terminology subcommittee, the concept of man- parel Sizing
aging terminology is the broad responsibility of every writer of
D5253 Terminology Relating to Floor Coverings andTextile
standards, specifically the task group leader and subcommittee Upholstered Furniture
chairman.
D5646 Terminology Relating to Seams and Stitches Used in
Home Sewing
1.4 Subsequent to a listing of specific subcommittee
D5684 Terminology Relating to Pile Floor Coverings
compilations, this standard is comprised of the following
D6477 Terminology Relating to Tire Cord, Bead Wire, Hose
sections that are listed in the order in which they appear.
Reinforcing Wire, and Fabrics
1.4.1 Alphabetical listing of terms with definitions followed
D6798 Terminology Relating to Flax and Linen
by SC attribution in brackets and SC terminology standard.
D6799 Terminology Relating to Inflatable Restraints
1.4.2 Annex A1 Terms Relating to the Hand of Fabrics.
D6963 Terminology Relating to Sewn Products Automation
1.4.3 Annex A2 Industry Accepted Synonyms.
D7018 Terminology Relating to Glass Fiber and Its Products
D7022 Terminology Relating to Apparel
1
ThisterminologyisunderthejurisdictionofASTMCommitteeD13onTextiles
2
and is the direct responsibility of Subcommittee D13.92 on Terminology. For referenced ASTM standards, visit the ASTM website, www.astm.org, or
Current edition approved Sept. 15, 2015. Published October 2015. Originally contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
approved in 1921. Last previous edition approved in 2015 as D123 – 15a. DOI: Standards volume information, refer to the standard’s Document Summary page on
10.1520/D0123-15B. the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
D123 − 15b
D7023 Terminology Relating to Home Furnishings across shoulder, n—in body measurements, the distance from
D7139 Terminology for Cotton Fibers shoulder joint to shoulder jo
...

This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because
it may not be technically possible to adequately depict all changes accurately, ASTM recommends that users consult prior editions as appropriate. In all cases only the current version
of the standard as published by ASTM is to be considered the official document.
Designation: D123 − 15a D123 − 15b
Standard Terminology Relating to
1
Textiles
This standard is issued under the fixed designation D123; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
This standard has been approved for use by agencies of the U.S. Department of Defense.
1. Scope
1.1 This standard is the compilation of all terminology developed by Committee D13 on Textiles.
1.1.1 This terminology, consists mostly of definitions, which are specific to the textile industry. Meanings of the same terms
used outside the textile industry can be found in other compilations or in dictionaries of general usage.
1.1.2 The specific D13 subcommittee (SC) which has jurisdictional responsibility for every item is the first attribution noted
after the definition. The SC terminology standard in which all the terms and definitions appear is listed by number after the
jurisdiction for the term. The wording of an entry cannot be changed without the approval of the subcommittee which has
jurisdiction. Users of this compilation should also review the SC terminology standard listed for more details or interpretations of
these terms and their use by the SC having jurisdiction.
1.2 In addition to being a specialized dictionary, Terminology D123 is also a tool for managing the committee’s terminology.
This includes finding, eliminating, and preventing redundancies, that is, where two or more terms relating the same concept are
defined in different words. Redundancies can also occur when one definition is used for two or more terms.
1.3 While the review for clarity and form are the responsibility of the terminology subcommittee, the concept of managing
terminology is the broad responsibility of every writer of standards, specifically the task group leader and subcommittee chairman.
1.4 Subsequent to a listing of specific subcommittee compilations, this standard is comprised of the following sections that are
listed in the order in which they appear.
1.4.1 Alphabetical listing of terms with definitions followed by SC attribution in brackets and SC terminology standard.
1.4.2 Annex A1 Terms Relating to the Hand of Fabrics.
1.4.3 Annex A2 Industry Accepted Synonyms.
1.4.4 Annex A3 Terminology Taken From D13 Standards That Have Been Withdrawn.
1.4.5 Annex A4 Terminology Relating to Leather.
1.4.6 Annex A5 Terminology Revision Procedures.
1.4.7 Appendix X1 Other Sources of Textile Terminology.
2. Referenced Documents
2
2.1 ASTM Standards:
D2050 Terminology Relating to Fasteners and Closures Used with Textiles
D3136 Terminology Relating to Care Labeling for Apparel, Textile, Home Furnishing, and Leather Products
D3888 Terminology for Yarn Spinning Systems
D3990 Terminology Relating to Fabric Defects
D4391 Terminology Relating to The Burning Behavior of Textiles
D4845 Terminology Relating to Wool
D4848 Terminology Related to Force, Deformation and Related Properties of Textiles
D4849 Terminology Related to Yarns and Fibers
D4850 Terminology Relating to Fabrics and Fabric Test Methods
D4920 Terminology Relating to Conditioning, Chemical, and Thermal Properties
D5219 Terminology Relating to Body Dimensions for Apparel Sizing
1
This terminology is under the jurisdiction of ASTM Committee D13 on Textiles and is the direct responsibility of Subcommittee D13.92 on Terminology.
Current edition approved Sept. 1, 2015Sept. 15, 2015. Published October 2015. Originally approved in 1921. Last previous edition approved in 2015 as
D123 – 15.D123 – 15a. DOI: 10.1520/D0123-15A.10.1520/D0123-15B.
2
For referenced ASTM standards, visit the ASTM website, www.astm.org, or contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM Standards
volume information, refer to the standard’s Document Summary page on the ASTM website.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
1

---------------------- Page: 1 ----------------------
D123 − 15b
D5253 Terminology Relating to Floor Coverings and Textile Upholstered Furniture
D5646 Terminology Relating to Seams and Stitches Used in Home Sewing
D5684 Terminology Relating to Pile Floor Coverings
D6477 Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics
D6798 Terminology Relating to Flax and Linen
D6799 Terminology Relating to Inflatable
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

ASTM
ASTM D123-23(Terminology)
Standard Terminology Relating to Textiles

SCOPE
1.1 This standard is the compilation of all terminology developed by Committee D13 on Textiles.  
1.1.1 This terminology, consists mostly of definitions, which are specific to the textile industry. Meanings of the same terms used outside the textile industry can be found in other compilations or in dictionaries of general usage.  
1.1.2 The specific D13 subcommittee (SC) which has jurisdictional responsibility for every item is the first attribution noted after the definition. The SC terminology standard in which all the terms and definitions appear is listed by number after the jurisdiction for the term. The wording of an entry cannot be changed without the approval of the subcommittee which has jurisdiction. Users of this compilation should also review the SC terminology standard listed for more details or interpretations of these terms and their use by the SC having jurisdiction.  
1.2 In addition to being a specialized dictionary, Terminology D123 is also a tool for managing the committee's terminology. This includes finding, eliminating, and preventing redundancies, that is, where two or more terms relating the same concept are defined in different words. Redundancies can also occur when one definition is used for two or more terms.  
1.3 While the review for clarity and form are the responsibility of the terminology subcommittee, the concept of managing terminology is the broad responsibility of every writer of standards, specifically the task group leader and subcommittee chairman.  
1.4 Subsequent to a listing of specific subcommittee compilations, this standard is comprised of the following sections that are listed in the order in which they appear.  
1.4.1 Alphabetical listing of terms with definitions followed by SC attribution in brackets and SC terminology standard.  
1.4.2 Annex A1 Terms Relating to the Hand of Fabrics.  
1.4.3 Annex A2 Industry Accepted Synonyms.  
1.4.4 Annex A3 Terminology Taken From D13 Standards That Have Been Withdrawn.  
1.4.5 Annex A4 Terminology Relating to Leather.  
1.4.6 Annex A5 Terminology Revision Procedures.  
1.4.7 Appendix X1 Other Sources of Textile Terminology.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    71 pages
    English language
    sale 15% off
  • Standard
    71 pages
    English language
    sale 15% off
ASTM
ASTM D4848-98(2018)(Terminology)
Standard Terminology Related to Force, Deformation and Related Properties of Textiles

SCOPE
1.1 This terminology standard is a compilation of definitions of technical terms related to force and deformation properties when evaluating a stress-strain curve of a textile. (See Figs. X1.1 and X1.2.) A chart showing the relationship of the basic terms is shown in Table 1. Terms that are generally understood or adequately defined in other readily available sources are not included.  
1.2 For other terms associated with textiles, refer to Terminology D123.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    6 pages
    English language
    sale 15% off
ASTM
ASTM D123-23(Terminology)
Standard Terminology Relating to Textiles

SCOPE
1.1 This standard is the compilation of all terminology developed by Committee D13 on Textiles.  
1.1.1 This terminology, consists mostly of definitions, which are specific to the textile industry. Meanings of the same terms used outside the textile industry can be found in other compilations or in dictionaries of general usage.  
1.1.2 The specific D13 subcommittee (SC) which has jurisdictional responsibility for every item is the first attribution noted after the definition. The SC terminology standard in which all the terms and definitions appear is listed by number after the jurisdiction for the term. The wording of an entry cannot be changed without the approval of the subcommittee which has jurisdiction. Users of this compilation should also review the SC terminology standard listed for more details or interpretations of these terms and their use by the SC having jurisdiction.  
1.2 In addition to being a specialized dictionary, Terminology D123 is also a tool for managing the committee's terminology. This includes finding, eliminating, and preventing redundancies, that is, where two or more terms relating the same concept are defined in different words. Redundancies can also occur when one definition is used for two or more terms.  
1.3 While the review for clarity and form are the responsibility of the terminology subcommittee, the concept of managing terminology is the broad responsibility of every writer of standards, specifically the task group leader and subcommittee chairman.  
1.4 Subsequent to a listing of specific subcommittee compilations, this standard is comprised of the following sections that are listed in the order in which they appear.  
1.4.1 Alphabetical listing of terms with definitions followed by SC attribution in brackets and SC terminology standard.  
1.4.2 Annex A1 Terms Relating to the Hand of Fabrics.  
1.4.3 Annex A2 Industry Accepted Synonyms.  
1.4.4 Annex A3 Terminology Taken From D13 Standards That Have Been Withdrawn.  
1.4.5 Annex A4 Terminology Relating to Leather.  
1.4.6 Annex A5 Terminology Revision Procedures.  
1.4.7 Appendix X1 Other Sources of Textile Terminology.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    71 pages
    English language
    sale 15% off
  • Standard
    71 pages
    English language
    sale 15% off
ASTM
ASTM D4848-98(2018)(Terminology)
Standard Terminology Related to Force, Deformation and Related Properties of Textiles

SCOPE
1.1 This terminology standard is a compilation of definitions of technical terms related to force and deformation properties when evaluating a stress-strain curve of a textile. (See Figs. X1.1 and X1.2.) A chart showing the relationship of the basic terms is shown in Table 1. Terms that are generally understood or adequately defined in other readily available sources are not included.  
1.2 For other terms associated with textiles, refer to Terminology D123.  
1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    6 pages
    English language
    sale 15% off
ASTM
ASTM F1210-23(Guide)
Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Lakes and Large Water Bodies

SIGNIFICANCE AND USE
3.1 This guide is meant to aid response teams who may use it during spill response planning and spill events.  
3.2 This guide should be adapted to site specific circumstance.
SCOPE
1.1 This guide covers the use of oil spill dispersants to assist in the control of oil spills. The guide is written with the goal of minimizing the environmental impacts of oil spills; this goal is the basis on which the recommendations are made. Aesthetic and socioeconomic factors are not considered, although these and other factors are often important in spill response.  
1.2 Spill responders have available several means to control or clean up spilled oil. Chemical dispersants should be given equal consideration with other spill countermeasures.  
1.3 This is a general guide only. Oil, as used in this guide, includes crude oils and refined petroleum products. Differences between individual dispersants or between different oil products are not considered. The dispersibility of the oil with the chosen dispersant should be evaluated.  
1.4 The guide is organized by habitat type, for example, small ponds and lakes, rivers and streams, and land. It considers the use of dispersants primarily to protect habitats from impact (or to minimize impacts).  
1.5 This guide applies only to freshwater and other inland environments. It does not consider the direct application of dispersants to subsurface waters.  
1.6 In making dispersant use decisions, appropriate government authorities should be consulted as required by law.  
1.7 This guide does not address getting regulatory approval.  
1.8 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    3 pages
    English language
    sale 15% off
  • Guide
    3 pages
    English language
    sale 15% off
ASTM
ASTM C596-23(Test Method)
Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement

SIGNIFICANCE AND USE
4.1 This test method establishes a selected set of conditions of temperature, relative humidity and rate of evaporation of the environment to which a mortar specimen of stated composition shall be subjected for a specified period of time during which its change in length is determined and designated “drying shrinkage.”  
4.2 The drying shrinkage of mortar as determined by this test method has a linear relation to the drying shrinkage of concrete made with the same cement and exposed to the same drying conditions.4 Hence this test method may be used when it is desired to develop data on the effect of a hydraulic cement on the drying shrinkage of concrete made with that cement.
SCOPE
1.1 This test method determines the change in length on drying of mortar bars containing hydraulic cement and graded standard sand.  
1.2 The values stated in SI units are to be regarded as standard. When combined standards are referenced, the selection of measurement system is at the user’s discretion subject to the requirements of the referenced standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Warning—Fresh hydraulic cementitious mixtures are caustic and may cause chemical burns to skin and tissue upon prolonged exposure).2  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Standard
    4 pages
    English language
    sale 15% off
  • Standard
    4 pages
    English language
    sale 15% off
ASTM
ASTM D1751-23(Specification)
Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Asphalt Types)

SCOPE
1.1 This specification covers preformed expansion joint filler having relatively little extrusion and substantial recovery after release from compression.  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
Note 1: Attention is called to Specifications D1752 and D994/D994M.  
1.3 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the standard.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM B637-23(Specification)
Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service

ABSTRACT
This specification covers hot- and cold-worked precipitation-hardenable nickel alloy rod, bar, forgings, and forging stock for high-temperature service. Chemical analysis shall be performed on the alloy and shall conform to the chemical composition requirement in carbon, manganese, silicon, phosphorus, sulfur, chromium, cobalt, molybdenum, columbium, tantalum, titanium, aluminum, zirconium, boron, iron, copper, and nickel. The material shall follow recommended annealing treatment, solution treatment, stabilizing treatment, and precipitation hardening treatment. Tension testing, hardness testing and stress-rupture testing shall be performed on the material and shall comply to the required tensile strength, yield strength, elongation, reduction in area, and Brinell hardness.
SCOPE
1.1 This specification2 covers hot- and cold-worked precipitation-hardenable nickel alloy rod, bar, forgings, and forging stock for moderate or high temperature service (Table 1).  
1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.  
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to become familiar with all hazards including those identified in the appropriate Safety Data Sheet (SDS) for this product/material as provided by the manufacturer, to establish appropriate safety, health, and environmental practices, and determine the applicability of regulatory limitations prior to use.  
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    7 pages
    English language
    sale 15% off
  • Technical specification
    7 pages
    English language
    sale 15% off
ASTM
ASTM D8139-23(Specification)
Standard Specification for Semi-Rigid, Closed-Cell Polypropylene Foam, Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction

SCOPE
1.1 This specification covers preformed expansion joint fillers made from closed-cell polypropylene foam materials having suitable compressibility, recovery from compression, nonextruding, and weather-resistant characteristics.  
1.1.1 Type I, closed-cell polypropylene foam.  
1.2 These joint fillers are intended for use in concrete pavements in full-depth joints. There are several variations in size with typical thicknesses of 1/2 in. (12.7 mm), 3/4 in. (19.05 mm), and 1 in. (25.4 mm); typical widths of 31/2 in. (88.9 mm), 4 in. (101.6 mm), 5 in. (127 mm), 6 in. (152.5 mm), 7 in. (177.8 mm), 8 in. (203.2 mm), or 48 in. (1.2 m) sheet; and typical lengths of 5 ft (1.52 m) and 10 ft (3.05 m).  
1.3 The values stated in inch-pound units are to be regarded as the standard.  
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Technical specification
    2 pages
    English language
    sale 15% off
  • Technical specification
    2 pages
    English language
    sale 15% off
ASTM
ASTM F3337-23(Guide)
Standard Guide for Taking Property and Behavior Measurements on Weathered Fractions of Oil

SIGNIFICANCE AND USE
5.1 A standard procedure is necessary to establish property changes for spilled oils or petroleum products at different oil weathering stages.  
5.2 This procedure employs standardized equipment, and test procedures.  
5.3 This procedure should be performed at the stages of weathering corresponding to the spill conditions of interest.
SCOPE
1.1 This guide summarizes methods to fractionate oil by evaporative weathering and then measure the properties and behavior of the weathered oil. The results of this guide can provide oil behavior data for input into oil spill models and response method selection.  
1.2 This guide covers general procedures for oil weathering and behavior and does not cover all possible procedures which may be applicable to this topic.  
1.3 The results obtained using this guide are intended to provide baseline data for the behavior of oil and petroleum products when spilled and input to oil spill models.  
1.4 The results obtained using this guide can be used directly to predict certain facets of oil spill behavior or as input to oil spill models.  
1.5 The accuracy of the guide depends very much on the representative nature of the oil sample used. Certain oils can have different properties depending on their chemical contents at the moment a sample is taken.  
1.6 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.  
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.  
1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

  • Guide
    4 pages
    English language
    sale 15% off
  • Guide
    4 pages
    English language
    sale 15% off