Standard Consumer Safety Specification for Safety Instructions and Labeling for Recreational Powered Scooters and Pocket Bikes (Withdrawn 2023)

ABSTRACT
This consumer safety specification includes requirements for safety instructions and labeling for recreational powered scooters and pocket bikes. Safety instructions shall be included with each unit and shall have the following: age and weight limit of the user, original design and configuration of the unit, operation of the unit, pre-operation checks, demonstration of unit, appropriate clothing and helmet, and maintenance. The maintenance instructions shall include: brake adjustments and service, tire inflation pressures, lubrication points including recommended lubricants, drive system specification and service instructions, frame inspection procedures, capacity by weight, maximum operating speeds, service and adjustment procedures for all components, and a phone number to secure maintenance or operating assistance from the manufacturer. Name and place of the business, manufacturer, importer, distributor, or seller shall be listed in the manual and on the retail box. Warning systems shall be in contrasting colors, permanent, conspicuous, and in sans serif style font.
SCOPE
1.1 This consumer safety specification includes requirements for safe-use instructions and labeling to minimize the hazards to users of recreational powered scooters and pocket bikes. This specification is intended to cover safety instructions, labeling, and maintenance for products for:  
1.1.1 Children age eight to twelve for units limited to speeds 16 km/h (10 miles/h) or less, and  
1.1.2 Children age 13 and above for fast-moving units capable of achieving speeds of >16 km/h (>10 miles/h).  
1.2 This specification is intended to reduce hazards, other than those inherent to the users of these units during normal intended use and within manufacturers’ safety guidelines.  
1.3 This specification is not intended for non powered scooters (Consumer Safety Specification F2264), battery powered ride-on toys (Consumer Safety Specification F963), motorcycles, skateboards, all terrain vehicles (ATVs), go-karts (Practice F2007), fun-karts (Safety Guide F1928), snowmobiles, motorized trail bikes, lawn mowers, or motorized wheelchairs including mobility scooters.  
1.4 This specification is not intended for units designed for “Adult Use Only” and that are prominently labeled and marked as such.  
1.5 This specification is not intended for units designed or licensed for roadway use or regulated by transportation regulations (that is, Department of Transportation (DOT) or state).  
1.6 The values given in SI units are to be considered as the standard. The values given in parentheses are for information only.  
1.7 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
WITHDRAWN RATIONALE
This consumer safety specification includes requirements for safe-use instructions and labeling to minimize the hazards to users of recreational powered scooters and pocket bikes.
Formerly under the jurisdiction of Committee F15 on Consumer Products, this consumer safety specification was withdrawn in August 2023 and its requirements incorporated into the newly revised Consumer Safety Specification F2641 for Recreational Powered Scooters and Pocket Bikes.1

General Information

Status
Withdrawn
Publication Date
31-May-2015
Current Stage
Ref Project

Buy Standard

Technical specification
ASTM F2642-08(2015) - Standard Consumer Safety Specification for Safety Instructions and Labeling for Recreational Powered Scooters and Pocket Bikes (Withdrawn 2023)
English language
3 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)


NOTICE: This standard has either been superseded and replaced by a new version or withdrawn.
Contact ASTM International (www.astm.org) for the latest information
Designation: F2642 − 08 (Reapproved 2015)
Standard Consumer Safety Specification for
Safety Instructions and Labeling for Recreational Powered
Scooters and Pocket Bikes
This standard is issued under the fixed designation F2642; the number immediately following the designation indicates the year of
original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A
superscript epsilon (´) indicates an editorial change since the last revision or reapproval.
1. Scope 2. Referenced Documents
1.1 This consumer safety specification includes require- 2.1 ASTM Standards:
ments for safe-use instructions and labeling to minimize the F963 Consumer Safety Specification for Toy Safety
hazards to users of recreational powered scooters and pocket F1928 Safety Guide for Consumer Recreational Use of
bikes. This specification is intended to cover safety Fun-Karts
instructions, labeling, and maintenance for products for: F2007 Practice for Design, Manufacture, and Operation of
1.1.1 Children age eight to twelve for units limited to speeds Concession Go-Karts and Facilities
16 km/h (10 miles/h) or less, and F2264 Consumer Safety Specification for Non-Powered
1.1.2 Children age 13 and above for fast-moving units Scooters
capable of achieving speeds of >16 km/h (>10 miles/h). 2.2 ANSI Standards:
ANSI Z535.4 Standard for Product Safety Signs, Labels, etc.
1.2 This specification is intended to reduce hazards, other
ANSI Z535.6 Product Safety Information—Instructions
than those inherent to the users of these units during normal
intended use and within manufacturers’ safety guidelines.
3. Terminology
1.3 This specification is not intended for non powered
3.1 Definitions of Terms Specific to This Standard:
scooters (Consumer Safety Specification F2264), battery pow-
3.1.1 units, n—manufactured recreational motorized trans-
ered ride-on toys (Consumer Safety Specification F963),
port devices as defined in Section 1.
motorcycles, skateboards, all terrain vehicles (ATVs), go-karts
(Practice F2007), fun-karts (Safety Guide F1928),
4. Safety Instructions
snowmobiles, motorized trail bikes, lawn mowers, or motor-
4.1 Safety instructions shall be included with each unit and
ized wheelchairs including mobility scooters.
shall include, as appropriate for the unit, the following items.
1.4 This specification is not intended for units designed for
4.1.1 Age and weight limit of the user.
“Adult Use Only” and that are prominently labeled and marked
4.1.2 Units shall not be modified from the manufacturer’s
as such.
original design and configuration.
4.1.3 Units shall not be operated to perform racing, stunt
1.5 This specification is not intended for units designed or
riding, or other maneuvers, which may cause loss of control, or
licensed for roadway use or regulated by transportation regu-
may cause uncontrolled operator/passenger actions or reac-
lations (that is, Department of Transportation (DOT) or state).
tions.
1.6 The values given in SI units are to be considered as the
4.1.4 Persons shall be advised not to allow hands, feet, hair,
standard. The values given in parentheses are for information
body parts, clothing, or similar articles to come in contact with
only.
moving parts, wheels, or drivetrain, while the engine is
1.7 This standard does not purport to address all of the
running.
safety concerns, if any, associated with its use. It is the
4.1.5 Before each cycle of operation, the operator shall
responsibility of the user of this standard to establish appro-
perform the preoperation checks specified by the manufacturer:
priate safety and health practices and determine the applica-
4.1.5.1 That all guards and pads originally supplied by the
bility of regulatory limitations prior to use.
manufacturer are in proper place and in serviceable condition;
1 2
This consumer safety specification is under the jurisdiction of ASTM Commit- For referenced ASTM standards, visit the ASTM website, www.astm.org, or
tee F15 on Consumer Products and is the direct responsibility of Subcommittee contact ASTM Customer Service at service@astm.org. For Annual Book of ASTM
F15.58 on Powered Scooters & Skateboards. Standards volume information, refer to the standard’s Document Summary page on
Current edition approved June 1, 2015. Published September 2015. Originally the ASTM website.
approved in 2008. Last previous edition approved in 2008 as F2642 – 08. DOI: Available from American National Standards Institute (ANSI), 25 W. 43rd St.,
10.1520/F2642-08R15. 4th Floor, New York, NY 10036, http://www.ansi.org.
Copyright © ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959. United States
F2642 − 08 (2015)
4.1.5.2 That the area that the unit is to be operated in is safe 5.1.1 Brake adjustments and service;
and suitable for safe operation; 5.1.2 Tire inflation pressures;
4.1.5.3 That the braking system is functioning properly; 5.1.3 Lubrication points including recommended lubricants;
4.1.5.4 That all safety labels are in place and understood by 5.1.4 Drive system specifications and service instructions;
the operator and any passenger; 5.1.5 Frame inspection procedures;
4.1.5.5 That any and all axle guards, chain guards, or other 5.1.6 Capacity by weight;
covers or guards supplied by the manuf
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.