71.100.50 - Wood-protecting chemicals
ICS 71.100.50 Details
Wood-protecting chemicals
Holzschutzchemikalien
Produits de protection du bois
Kemikalije za zaščito lesa
General Information
e-Library Subscription
Create subscription and get permanent access to documents within 71.100.50 - Wood-protecting chemicals
Currently subscription includes documents marked with .We are working on making all documents available within the subscription.
This document specifies a method for determining the leaching of active ingredients or other compounds from preservative treated wood by a semi-field method for Use Class 3 (outdoor above ground). The preservative treated wood can be tested with or without subsequently surface coating or other water-repellent treatment. The method is applicable to the testing of commercial or experimental preservatives or paint systems applied to timber by methods appropriate to commercial practice.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for determining the leaching of active ingredients or other compounds from preservative treated wood by a semi-field method for Use Class 3 (outdoor above ground). The preservative treated wood can be tested with or without subsequently surface coating or other water-repellent treatment. The method is applicable to the testing of commercial or experimental preservatives or paint systems applied to timber by methods appropriate to commercial practice.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a laboratory method for obtaining water samples from preservative treated wood exposed out of ground contact (wood held in the storage yard after treatment and which has been in conditions designed to simulate outdoor, out of ground contact situations), at increasing time intervals after exposure.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a laboratory method for obtaining water samples from preservative treated wood exposed out of ground contact (wood held in the storage yard after treatment and which has been in conditions designed to simulate outdoor, out of ground contact situations), at increasing time intervals after exposure.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the determination of the preventive action of a wood preservative against the Reticulitermes species of European termites when the preservative is applied as a surface treatment to wood.
NOTE 1 This method can be applied not only to different species of Reticulitermes, but also to other species of the family Rhinotermitidae, where necessary adapting the temperature and humidity conditions and the assessment of attack to the specific behaviour of the species concerned.
This method is applicable to:
— water-insoluble chemicals which are being studied as active ingredients;
— organic formulations, as supplied or as prepared in the laboratory by dilution of concentrates;
— organic water-dispersible formulations as supplied or as prepared in the laboratory by dilution of concentrates; and
— water-soluble materials, for example salts.
NOTE 2 This method can be used in conjunction with an ageing procedure, for example EN 73 or EN 84.
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the determination of the preventive action of a wood preservative against the Reticulitermes species of European termites when the preservative is applied as a surface treatment to wood.
NOTE 1 This method can be applied not only to different species of Reticulitermes, but also to other species of the family Rhinotermitidae, where necessary adapting the temperature and humidity conditions and the assessment of attack to the specific behaviour of the species concerned.
This method is applicable to:
— water-insoluble chemicals which are being studied as active ingredients;
— organic formulations, as supplied or as prepared in the laboratory by dilution of concentrates;
— organic water-dispersible formulations as supplied or as prepared in the laboratory by dilution of concentrates; and
— water-soluble materials, for example salts.
NOTE 2 This method can be used in conjunction with an ageing procedure, for example EN 73 or EN 84.
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a test method using water immersion test for assessing the bleeding of coloured wood extractives through a coating. Leachates of coated and uncoated wood are collected after the immersion procedure and their colour is compared. The colour of the coated wood before and after immersion tests is also compared. This document does not specify acceptance values for colour differences that can be tolerated and it is not applicable to staining caused by knots for which there is a different test method (see EN 927 7).
NOTE The method has been developed for oak and chestnut wood and might be applicable for other wood substrates containing water soluble extractives.
- Technical specification9 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the requirements and the test methods for creosotes for industrial wood preservation.
Different grades of creosote are used depending on the desired properties of the treated wood.
WARNING — The use of this document can involve hazardous materials, operations and equipment. This document cannot address all of the safety implications associated with its use. It is the responsibility of the user of this document to establish appropriate health and safety practices and assess the applicability of regulatory limitations prior to use. The warnings to use are covered in Annex C.
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a laboratory method for obtaining water samples from treated wood which has been in conditions designed to simulate continuous contact with the ground or with water (use Class 4 or 5), at time intervals after exposure.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a laboratory method for obtaining water samples from treated wood which has been in conditions designed to simulate continuous contact with the ground or with water (use Class 4 or 5), at time intervals after exposure.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies an evaporative ageing procedure, applicable to test specimens of wood and wood-based products which are subsequently subjected to biological tests.
NOTE The method can also be used for pre-conditioning of untreated wood, modified wood and wood-based panel products, whether they received preservative treatment or not.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies an evaporative ageing procedure, applicable to test specimens of wood and wood-based products which are subsequently subjected to biological tests.
NOTE The method can also be used for pre-conditioning of untreated wood, modified wood and wood-based panel products, whether they received preservative treatment or not.
- Standard10 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the determination of the curative action of a wood preservative against infestation by Anobium punctatum (De Geer) when the product is applied as a surface treatment to wood.
This method is applicable to any surface-applied treatment that is intended to prevent emergence of adult beetles but not intended to kill larvae in infested timber.
NOTE 1 This method can be used in conjunction with an ageing procedure, for example EN 73.
NOTE 2 Products intended to kill larvae can be tested by the method described in EN 48.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the determination of the toxic values of a wood preservative against the Reticulitermes species of European termites.
This method is applicable to:
- water-insoluble chemicals which are being studied as active insecticides;
- organic water-dispersible formulations as supplied or as prepared in the laboratory by dilution of concentrates; and
- water-soluble materials, for example salts.
NOTE This method can be used in conjunction with an ageing procedure, for example EN 73 or EN 84.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
This part of the EN 20 series specifies a method for the determination of the protective effectiveness or the toxic values of a wood preservative against infection by Lyctus brunneus (Stephens) in wood which has been treated previously by full impregantion.
This method is applicable to:
- water-insoluble chemicals which are being studied as active insecticides; or
- organic formulsation, as supplied or as prepared in the laboratory by dilution of concentrates.
This method is applicable to water-based preservatives.
NOTE This method can be used in conjuction with ageing procedures, which do not remove the added nutrient.
- Standard22 pagesEnglish languagesale 10% offe-Library read for1 day
This part of the EN 20 series specifies a method for the determination of the protective effectiveness or the toxic values of a wood preservative against infection by Lyctus brunneus (Stephens) when the product is applied as a surface treatment to wood.
This method is applicable to:
- water-insoluble chemicals which are being studied as active insecticides; or
- organic formulsation, as supplied or as prepared in the laboratory by dilution of concentrates; or
- organic water-dispersible formulations as supplied or as prepared in the laboratory by dilution of concentrates; or
- water-soluble materials, for example salts.
NOTE This method can be used in conjuction with ageing procedures, which do not remove the added nutrient.
- Standard22 pagesEnglish languagesale 10% offe-Library read for1 day
This part of the EN 20 series specifies a method for the determination of the protective effectiveness or the toxic values of a wood preservative against infection by Lyctus brunneus (Stephens) when the product is applied as a surface treatment to wood.
This method is applicable to:
- water-insoluble chemicals which are being studied as active insecticides; or
- organic formulsation, as supplied or as prepared in the laboratory by dilution of concentrates; or
- organic water-dispersible formulations as supplied or as prepared in the laboratory by dilution of concentrates; or
- water-soluble materials, for example salts.
NOTE This method can be used in conjuction with ageing procedures, which do not remove the added nutrient.
- Standard22 pagesEnglish languagesale 10% offe-Library read for1 day
This part of the EN 20 series specifies a method for the determination of the protective effectiveness or the toxic values of a wood preservative against infection by Lyctus brunneus (Stephens) in wood which has been treated previously by full impregantion.
This method is applicable to:
- water-insoluble chemicals which are being studied as active insecticides; or
- organic formulsation, as supplied or as prepared in the laboratory by dilution of concentrates.
This method is applicable to water-based preservatives.
NOTE This method can be used in conjuction with ageing procedures, which do not remove the added nutrient.
- Standard22 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the determination of the curative action of a wood preservative against infestation by Anobium punctatum (De Geer) when the product is applied as a surface treatment to wood.
This method is applicable to any surface-applied treatment that is intended to prevent emergence of adult beetles but not intended to kill larvae in infested timber.
NOTE 1 This method can be used in conjunction with an ageing procedure, for example EN 73.
NOTE 2 Products intended to kill larvae can be tested by the method described in EN 48.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the determination of the toxic values of a wood preservative against the Reticulitermes species of European termites.
This method is applicable to:
- water-insoluble chemicals which are being studied as active insecticides;
- organic water-dispersible formulations as supplied or as prepared in the laboratory by dilution of concentrates; and
- water-soluble materials, for example salts.
NOTE This method can be used in conjunction with an ageing procedure, for example EN 73 or EN 84.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a test method for assessing the liquid water permeability of coating systems for exterior wood.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
This part of the EN 351 series establishes a classification of preservative-treated wood in terms of preservative penetration and gives guidance on a classification of retention. These can be used as a basis for specifying preservative treatments for particular products.
This part of the EN 351 series defines terminology to be used by the specifier when preparing a preservative treatment specification or product standard. It is not a treatment specification in itself.
This part of the EN 351 series is applicable to the production of preservative-treated solid wood, including glued laminated timber, suitable for use in those service conditions defined within the use classes in EN 335. It does not apply to any subsequent examination of treated wood in service.
NOTE 1 Glued laminated timber is not suitable for use in fresh or sea water.
This part of the EN 351 series is applicable to the protection of wood against attack by wood-destroying and wood-disfiguring fungi, insects and marine organisms.
NOTE 2 Protection against wood-disfiguring fungi is an optional property verified by testing in accordance with EN 599-1.
This part of the EN 351 series does not consider other properties of treated wood, for example odour, compatibility with other materials, such as corrosivity of fasteners. Nor does it consider any properties from the health, safety and environmental point of view.
This part of the EN 351 series does not apply to wood to be treated with formulations which are applied to timber in service to eliminate or control an existing fungal or insect infestation, or the prevention of attack by sapstain fungi, or insects in green timber.
Annex A (informative) provides a decision process for specifying preservative treatment requirements.
Annex B (informative) gives an example of the marking system.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This part of the EN 351 series gives guidance for the general procedures to be used in obtaining samples of preservative-treated wood for the determination of penetration and retention of wood preservative. It also gives guidance on the measurement of penetration and retention of a wood preservative in the treated wood.
This part of the EN 351 series is applicable to the production of preservative-treated solid wood, including glued laminated timber, suitable for use in those service conditions defined within the use classes in EN 335.
NOTE Glued laminated timber is not suitable for use in fresh or sea water.
This part of the EN 351 series is not applicable to preservative-treated wood in service. However, the sampling guidance provided within this part of the EN 351 series can be applied for the subsequent examination of treated wood in service.
Annex A (informative) provides a selection of number of sample units.
Annex B (informative) provides examples of retention measurements.
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
This Technical Specification describes a test method to measure the ultraviolet (UV) and visible (VIS) spectral transmittance in the wavelength range from 280 nm to 700 nm of coatings for exterior wood. From the spectral transmittance the transmittance of UV, VIS and the UV plus VIS wavelength range can be calculated.
It is applicable to free coatings films or coatings applied on a UV-transparent substrate.
- Technical specification14 pagesEnglish languagesale 10% offe-Library read for1 day
This part of the EN 351 series establishes a classification of preservative-treated wood in terms of preservative penetration and gives guidance on a classification of retention. These can be used as a basis for specifying preservative treatments for particular products.
This part of the EN 351 series defines terminology to be used by the specifier when preparing a preservative treatment specification or product standard. It is not a treatment specification in itself.
This part of the EN 351 series is applicable to the production of preservative-treated solid wood, including glued laminated timber, suitable for use in those service conditions defined within the use classes in EN 335. It does not apply to any subsequent examination of treated wood in service.
NOTE 1 Glued laminated timber is not suitable for use in fresh or sea water.
This part of the EN 351 series is applicable to the protection of wood against attack by wood-destroying and wood-disfiguring fungi, insects and marine organisms.
NOTE 2 Protection against wood-disfiguring fungi is an optional property verified by testing in accordance with EN 599-1.
This part of the EN 351 series does not consider other properties of treated wood, for example odour, compatibility with other materials, such as corrosivity of fasteners. Nor does it consider any properties from the health, safety and environmental point of view.
This part of the EN 351 series does not apply to wood to be treated with formulations which are applied to timber in service to eliminate or control an existing fungal or insect infestation, or the prevention of attack by sapstain fungi, or insects in green timber.
Annex A (informative) provides a decision process for specifying preservative treatment requirements.
Annex B (informative) gives an example of the marking system.
- Standard17 pagesEnglish languagesale 10% offe-Library read for1 day
This part of the EN 351 series gives guidance for the general procedures to be used in obtaining samples of preservative-treated wood for the determination of penetration and retention of wood preservative. It also gives guidance on the measurement of penetration and retention of a wood preservative in the treated wood.
This part of the EN 351 series is applicable to the production of preservative-treated solid wood, including glued laminated timber, suitable for use in those service conditions defined within the use classes in EN 335.
NOTE Glued laminated timber is not suitable for use in fresh or sea water.
This part of the EN 351 series is not applicable to preservative-treated wood in service. However, the sampling guidance provided within this part of the EN 351 series can be applied for the subsequent examination of treated wood in service.
Annex A (informative) provides a selection of number of sample units.
Annex B (informative) provides examples of retention measurements.
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for assessing the resistance of a coating system on wet wood to separation from the substrate by measuring the force necessary to detach or rupture the coating system by a normal tensile strain applied through an attached stud (dolly). Additional information is gained by noting the type and locus of failure. The force required for detachment will depend on several factors including the adhesion of the coating to the substrate and between intermediate coating layers. The procedure is not regarded as a direct means of measuring adhesion but an indicator of adhesive performance (adherence) under wet conditions.
A procedure for wetting the wood substrate is described. The test method is only suitable for wood and wood-based substrates.
For dry adhesion the test method can be carried out without wetting, in which case it will differ very little from EN ISO 4624.
- Technical specification14 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for determining the tensile properties of free coating films, specifically for exterior wood applications. Typical tensile properties of interest are the modulus of elasticity, the tensile strength and the elongation at break during stretching of a free coating film at constant test speed. The test methods specified in this document are applicable to coatings from which free films can be made.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a test method for wood preservatives that are intended for use in wood to be exposed to the weather out of contact with the ground without the additional protection of a surface coating.
The method is applicable to the testing of commercial or experimental preservatives applied by techniques appropriate to commercial practice. The method is applicable to chemical products used individually or in combination to prevent the development of decay and/or - optional - the development of disfiguring organisms in wood and, where suitable, in wood-based materials.
NOTE 1 The method can also be used to test other treated wood species and naturally durable timbers. It can be adapted for testing the field performance of other wood-based systems and treatments designed to enhance durability, for example treated or untreated wood based composites, timber treated with non-biocidal systems, chemically modified or heat treated timber. Guidance on samples and sampling of naturally durable wood and modified wood is found in EN 350.
NOTE 2 Although the test is used to assess decay, it is possible to use the method to additionally assess stain or each separately when relevant.
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a laboratory method for the determination of the treatability of wood in order to determine the likely reaction of different wood species to impregnation with wood preservatives. It is also applicable to investigate variation between samples of the same species but of different origin.
- Corrigendum3 pagesEnglish languagesale 10% offe-Library read for1 day
This document addresses performance criteria for coating systems on exterior wood. Performance requirements are specified according to three categories of end use (defined in EN 927 1) in terms of two mandatory tests, namely natural weathering performance testing carried out in accordance with EN 927 3, and water permeability in accordance with EN 927 5. Additional optional tests (non-mandatory) are tabled which can be used by suppliers, or for specification purposes, to provide additional information, to a standardized format, on aspects of performance relevant to specific situations. The majority of test methods are drawn from EN 927 (all parts), but where relevant additional tests from other national and international sources are used.
Requirements for claiming conformity with this document are defined and provide flexibility for different situations and can also provide a basis for certification.
- Standard15 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a test method for wood preservatives that are intended for use in wood to be exposed to the weather out of contact with the ground without the additional protection of a surface coating.
The method is applicable to the testing of commercial or experimental preservatives applied by techniques appropriate to commercial practice. The method is applicable to chemical products used individually or in combination to prevent the development of decay and/or - optional - the development of disfiguring organisms in wood and, where suitable, in wood-based materials.
NOTE 1 The method can also be used to test other treated wood species and naturally durable timbers. It can be adapted for testing the field performance of other wood-based systems and treatments designed to enhance durability, for example treated or untreated wood based composites, timber treated with non-biocidal systems, chemically modified or heat treated timber. Guidance on samples and sampling of naturally durable wood and modified wood is found in EN 350.
NOTE 2 Although the test is used to assess decay, it is possible to use the method to additionally assess stain or each separately when relevant.
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a laboratory method for the determination of the treatability of wood in order to determine the likely reaction of different wood species to impregnation with wood preservatives. It is also applicable to investigate variation between samples of the same species but of different origin.
- Standard16 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides guidance on how to apply curative acting wood preservatives by surface application, by filling pre-drilled holes, and by pressure impregnation through pre-drilled holes. It lists methods in a standardized form followed by additional detailed interpretive information.
This document also includes necessary preparations of structural timber prior to this kind of treatment. It gives guidance on how to calculate necessary retentions for filling pre-drilled holes or for pressure impregnation from test results obtained from surface applications (e.g. EN 1390).
- Technical report15 pagesEnglish languagesale 10% offe-Library read for1 day
This document is intended to facilitate the interpretation and use of the European Standards where the testing and specification of wood preservative products are described. It aims to assist users (manufacturers, specifiers, authorities, etc.) to correlate the choice of selected test methods, wood substrates and biological agents with the efficacy requirements of wood preservatives based on their claimed target organisms and end use. This document is a source of supplementary information to the relevant standards and cannot be used as a standalone document.
- Technical report18 pagesEnglish languagesale 10% offe-Library read for1 day
This document provides guidance on how to apply curative acting wood preservatives by surface application, by filling pre-drilled holes, and by pressure impregnation through pre-drilled holes. It lists methods in a standardized form followed by additional detailed interpretive information.
This document also includes necessary preparations of structural timber prior to this kind of treatment. It gives guidance on how to calculate necessary retentions for filling pre-drilled holes or for pressure impregnation from test results obtained from surface applications (e.g. EN 1390).
- Technical report15 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a test method for assessing film extensibility by indentation of a coating on a defined and carefully selected wooden extensibility substrate for coatings on stable wood components in exterior use. The method is preferably be used on coatings that have not been exposed to weathering.
- Technical specification9 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for determining the efficacy of wood preservatives applied to wood by penetration treatment against wood destroying basidiomycetes cultured on a malt extract agar medium.
The method is applicable to formulated products or to their active ingredients.
NOTE This method can be used in conjunction with an ageing procedure, for example EN 73 or EN 84.
Annex A (informative) contains an example of a test report.
Annex B (normative) contains some methods of sterilization.
Annex C (informative) contains information on the test vessels.
Annex D (informative) contains information on test fungi.
Annex E (informative) contains a recommended but non-comprehensive list of optional fungi.
- Standard31 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method of test for determining the natural durability of a timber against wood-destroying basidiomycetes cultured on a malt extract agar medium. The method is applicable to all timber species.
Furthermore this method can be used to test modified wood. The test method described in this document can be applied to specific wood species, commercial supplies of sawn timber, wood-based materials, wood treated with preservatives and modified wood, both thermally and chemically modified wood.
However, this document is not intended to determine the effectiveness of wood preservatives used to prevent decay.
NOTE 1 Determining the efficacy of wood preservatives used to prevent decay is the scope of EN 113-1. However, in addition to this and with some amendments, it might also be possible in some cases to test treated wood using the method described here.
NOTE 2 This method can be used in conjunction with an ageing procedure, for example EN 73 or EN 84.
Annex A (informative) contains a guidance on sampling.
Annex B (normative) contains some methods of sterilization.
Annex C (informative) contains information on the culture vessels.
Annex D (informative) contains an example of a test report.
Annex E (informative) contains information on the test fungi.
Annex F (informative) contains the assessment of the results.
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for leaching, applicable to test specimens of wood or wood-based products which are subsequently subjected to biological tests.
This document is applicable to:
a) the pre-conditioning of test specimens prior to their being subjected to a biological test; or
b) assessment of loss of effectiveness by comparing the performance in a biological test of treated test specimens subjected to this procedure with others that have not undergone any leaching procedure.
NOTE The method can also be used for pre-conditioning of untreated wood, modified wood and wood-based panel products, whether they received preservative treatment or not.
- Standard7 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method of test for determining the natural durability of a timber against wood-destroying basidiomycetes cultured on a malt extract agar medium. The method is applicable to all timber species.
Furthermore this method can be used to test modified wood. The test method described in this document can be applied to specific wood species, commercial supplies of sawn timber, wood-based materials, wood treated with preservatives and modified wood, both thermally and chemically modified wood.
However, this document is not intended to determine the effectiveness of wood preservatives used to prevent decay.
NOTE 1 Determining the efficacy of wood preservatives used to prevent decay is the scope of EN 113-1. However, in addition to this and with some amendments, it might also be possible in some cases to test treated wood using the method described here.
NOTE 2 This method can be used in conjunction with an ageing procedure, for example EN 73 or EN 84.
Annex A (informative) contains a guidance on sampling.
Annex B (normative) contains some methods of sterilization.
Annex C (informative) contains information on the culture vessels.
Annex D (informative) contains an example of a test report.
Annex E (informative) contains information on the test fungi.
Annex F (informative) contains the assessment of the results.
- Standard29 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for determining the efficacy of wood preservatives applied to wood by penetration treatment against wood destroying basidiomycetes cultured on a malt extract agar medium.
The method is applicable to formulated products or to their active ingredients.
NOTE This method can be used in conjunction with an ageing procedure, for example EN 73 or EN 84.
Annex A (informative) contains an example of a test report.
Annex B (normative) contains some methods of sterilization.
Annex C (informative) contains information on the test vessels.
Annex D (informative) contains information on test fungi.
Annex E (informative) contains a recommended but non-comprehensive list of optional fungi.
- Standard31 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for determining the performance of a preservative, applied to the upper surface of the mortar test specimens, in preventing the growth of dry rot through the treated mortar when exposed to the test fungus.
This method is only applicable to masonry fungicides applied as a true solution of the preservative in water or dilute oil in water emulsion. It is not applicable to rods, pastes and other similar preservative types. This method is applicable to preservatives applied to masonry by brushing, spraying and/or injection techniques or mixed into rendering and plastering mortar for masonry.
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the determination of the eradicant action of a surface application of a fast and a slow acting wood preservative product or a deferred acting wood preservative product on solid wood infested with larvae of Hylotrupes bajulus (Linnaeus).
This method is applicable to:
- organic formulations, as supplied or as prepared in the laboratory by dilution of concentrates; or
- organic water-dispersible formulations, as supplied or as prepared in the laboratory by dilution of concentrates; or
- water-soluble products, for example, salts.
NOTE An ageing procedure cannot be combined with this method.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the minimum performance requirements in biological tests for products for curative uses against specific wood destroying organisms. It specifies the biological tests required together with the efficacy criteria to be achieved in each test.
Chemicals against insects can act according to their specific properties within a short time (fast acting) or only after a long period (slow acting or with a deferred effect). Different tests and efficacy requirements are needed for these various types of curative wood preservatives.
This document is applicable to all wood preservative products supplied for application in liquid form for curative uses against attack by wood boring beetles. This document is also applicable for products applied to prevent the growth of the dry rot fungus through masonry.
This document is also applicable to products for curative uses supplied for application as pastes, solids or in capsule form but only where appropriate biological methods of test exist as published European Standards.
NOTE This standard is used as a reference document for the evaluation of efficacy of biocidal products PT8 (wood preservatives) in the framework of the European Regulation on Biocidal Products (EU) No 528/2012 (BPR).
This document is not applicable to products used as fumigants.
This document is also not applicable for determining whether specific curative products, used alone or in combination, are effective in conferring long-term protection against attack by wood destroying organisms. Preventive effectiveness can be determined using EN 599-1 but only for products that can be tested using the methods and interpretative procedures defined in EN 599-1.
Annex A (informative) contains a guidance on re-testing after making variations in product formulation.
Annex B (informative) contains some test recommendations for specific curative products against other insect species than Hylotrupes bajulus and Anobium punctatum.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for leaching, applicable to test specimens of wood or wood-based products which are subsequently subjected to biological tests.
This document is applicable to:
a) the pre-conditioning of test specimens prior to their being subjected to a biological test; or
b) assessment of loss of effectiveness by comparing the performance in a biological test of treated test specimens subjected to this procedure with others that have not undergone any leaching procedure.
NOTE The method can also be used for pre-conditioning of untreated wood, modified wood and wood-based panel products, whether they received preservative treatment or not.
- Standard7 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for determining the performance of a preservative, applied to the upper surface of the mortar test specimens, in preventing the growth of dry rot through the treated mortar when exposed to the test fungus.
This method is only applicable to masonry fungicides applied as a true solution of the preservative in water or dilute oil in water emulsion. It is not applicable to rods, pastes and other similar preservative types. This method is applicable to preservatives applied to masonry by brushing, spraying and/or injection techniques or mixed into rendering and plastering mortar for masonry.
- Standard20 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies the minimum performance requirements in biological tests for products for curative uses against specific wood destroying organisms. It specifies the biological tests required together with the efficacy criteria to be achieved in each test.
Chemicals against insects can act according to their specific properties within a short time (fast acting) or only after a long period (slow acting or with a deferred effect). Different tests and efficacy requirements are needed for these various types of curative wood preservatives.
This document is applicable to all wood preservative products supplied for application in liquid form for curative uses against attack by wood boring beetles. This document is also applicable for products applied to prevent the growth of the dry rot fungus through masonry.
This document is also applicable to products for curative uses supplied for application as pastes, solids or in capsule form but only where appropriate biological methods of test exist as published European Standards.
NOTE This standard is used as a reference document for the evaluation of efficacy of biocidal products PT8 (wood preservatives) in the framework of the European Regulation on Biocidal Products (EU) No 528/2012 (BPR).
This document is not applicable to products used as fumigants.
This document is also not applicable for determining whether specific curative products, used alone or in combination, are effective in conferring long-term protection against attack by wood destroying organisms. Preventive effectiveness can be determined using EN 599-1 but only for products that can be tested using the methods and interpretative procedures defined in EN 599-1.
Annex A (informative) contains a guidance on re-testing after making variations in product formulation.
Annex B (informative) contains some test recommendations for specific curative products against other insect species than Hylotrupes bajulus and Anobium punctatum.
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard18 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a method for the determination of the eradicant action of a surface application of a fast and a slow acting wood preservative product or a deferred acting wood preservative product on solid wood infested with larvae of Hylotrupes bajulus (Linnaeus).
This method is applicable to:
- organic formulations, as supplied or as prepared in the laboratory by dilution of concentrates; or
- organic water-dispersible formulations, as supplied or as prepared in the laboratory by dilution of concentrates; or
- water-soluble products, for example, salts.
NOTE An ageing procedure cannot be combined with this method.
- Standard23 pagesEnglish languagesale 10% offe-Library read for1 day
This document specifies a test method for assessing the discoloration of coating systems on wood due to wood extractives from knots. The discoloration is measured by colourimetry and the result is stated as the colour difference between the coated surface on the knot and the coated surface beside the knot.
- Standard12 pagesEnglish languagesale 10% offe-Library read for1 day