59.140.35 - Leather products
ICS 59.140.35 Details
Leather products
Produkte aus Leder
Produits en cuir
Usnjeni izdelki
General Information
Frequently Asked Questions
ICS 59.140.35 is a classification code in the International Classification for Standards (ICS) system. It covers "Leather products". The ICS is a hierarchical classification system used to organize international, regional, and national standards, facilitating the search and identification of standards across different fields.
There are 21 standards classified under ICS 59.140.35 (Leather products). These standards are published by international and regional standardization bodies including ISO, IEC, CEN, CENELEC, and ETSI.
The International Classification for Standards (ICS) is a hierarchical classification system maintained by ISO to organize standards and related documents. It uses a three-level structure with field (2 digits), group (3 digits), and sub-group (2 digits) codes. The ICS helps users find standards by subject area and enables statistical analysis of standards development activities.
This document sets the requirements for the description, labelling and marking of leather in leather goods.
This document defines the information to be included on descriptions, labels and markings for leather goods intended for sale to the final consumer.
- Standard8 pagesEnglish languagee-Library read for1 day
SIGNIFICANCE AND USE
4.1 This test method simulates the flexing received by upholstery leather in service, and correlation with service is believed to be good. Both the resistance of the finish to cracking and adhesion of the finish to the leather can be evaluated.
4.2 The flexing action received by the leather in this method is more severe than that given by methods for shoe upper leather. The less severe tests have little utility in the evaluation of upholstery leather finishes.
4.3 This test method is suitable, and has been useful, in research, development, and manufacturing control. It is used as a method of test for specification acceptance. Since this is a subjective test, proper correlation should be established by interlaboratory experience prior to use for specification acceptance.
SCOPE
1.1 This test method covers the determination of the flexibility and adhesion of a finish on upholstery leather.2 This test method does not apply to wet blue.
1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.
1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Standard3 pagesEnglish languagesale 15% off
This document sets the requirements for the description, labelling and marking of leather in leather goods.
This document defines the information to be included on descriptions, labels and markings for leather goods intended for sale to the final consumer.
- Standard8 pagesEnglish languagee-Library read for1 day
SIGNIFICANCE AND USE
4.1 Many consumers use the capacity measurement as a key specification to determine the backpack size suitable for their requirements.
SCOPE
1.1 This test method determines and standardizes an unextended and extended capacity for backpacks and related bags. Related bags include lumbar packs, soft rucksacks, internal and external frame packs, duffel bags, and travel packs.
1.2 This test method is designed to provide a means whereby manufacturers and consumers may have a consistent means to compare pack volumes.
1.3 This test method does not take into consideration areas of the backpack that are not completely enclosed by fabric such as mesh pockets, water bottle holders, and compressor pockets.
1.4 For practical purposes this test method cannot be used to measure capacities less than 4 L.
1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
- Standard3 pagesEnglish languagesale 15% off
This international standard provides guidelines for the classification and performance of leather upholstered products. This international standard is applicable for products made of leather upholstered for all levels of production. This international standard is applied, if the upholstered material is made of leather or rather is a leather semifinished product in the sense of ISO 15115.
- Draft5 pagesEnglish languagesale 15% off
- Draft5 pagesEnglish languagesale 15% off
- Draft5 pagesEnglish languagesale 15% off
- Draft5 pagesEnglish languagesale 15% off
SCOPE
1.1 This standard is a compilation of terminology developed by Subcommittee D13.62 on Labeling that is related to refurbishing and labeling for apparel, textile, home furnishing, and leather products other than upholstered furniture and floor coverings.
1.2 This terminology provides a uniform language for the disclosure of care instructions on labels that are to be attached to apparel, textile, home furnishing, and leather products according to the Federal Trade Commission’s regulation 16 CFR, Part 423 (See 2.3).
1.3 These terms, definitions and descriptions employ common meanings for the care instructions required to be on textile products sold in the U.S.
1.4 This terminology is unique to the care of textile and leather products as the meanings are often expressed in phrases for care processes related to home-type washers, dryers, drying techniques and those for professional care.
1.5 For definitions of other textile terms, see Terminology D123.
WITHDRAWN RATIONALE
This standard is a compilation of terminology developed by Subcommittee D13.62 on Labeling that is related to refurbishing and labeling for apparel, textile, home furnishing, and leather products other than upholstered furniture and floor coverings.
Formerly under the jurisdiction of Committee D13 on Textiles, this terminology was withdrawn in February 2023 in accordance with section 10.6.3 of the Regulations Governing ASTM Technical Committees, which requires that standards shall be updated by the end of the eighth year since the last approval date.
- Standard4 pagesEnglish languagesale 15% off
This European Standard specifies a method of determining the abrasion resistance of upholstery leathers. This method, "Taber Test", is often specified by automotive manufacturers for automotive upholstery.
- Standard7 pagesEnglish languagee-Library read for1 day