TP094 - Pravilnik o zahtevah glede pravilnega delovanja naprav za nanašanje fitofarmacevtskih sredstev in o pogojih ter načinu izvajanja njihovih pregledov

This document specifies terms, definitions and parameters for the determination of surface texture by
profile methods.
NOTE 1 The main changes to previous ISO profile documents are described in Annex I.
NOTE 2 An overview of profile and areal standards in the GPS matrix model is given in Annex J.
NOTE 3 The relation of this document to the GPS matrix model is given in Annex K.

ISO 5682-1:2017 specifies test methods to assess the performance of sprayer nozzles with the exception of droplet characteristics. Applicable tests by nozzle type are described in an informative annex as a guide, but this is not required for use of this document.

This International Standard applies to all types of machinery for pesticide application applicators used in agriculture, horticulture, forestry and other areas. ISO 16122 specifies the requirements and test methods for the inspection of machines in use. It relates mainly to the condition of the machine with respect to its potential risk for the environment and its performance to achieve a good application. This part of ISO 16122 defines the general requirements to be fulfilled. The specific requirements to the different types of machines are defined in the relevant specific parts. The scope of each specific part is defined in Annex A, normative. It also includes minimum safety requirements dealing with the operator’s safety during inspection.

This European Standard specifies the requirements and methods of their verification for the inspection of air-assisted sprayers for bush and tree crops in use. It relates mainly to the condition of the sprayer in respect of safety hazards for the test operator, the potential risk of environmental contamination and opportunities to achieve good application.

This International Standard, to be used with ISO 16122-1, specifies the requirements and methods for their verification for the inspection of fixed and semi-mobile prayers in use. It relates mainly to the condition of the sprayer in respect of the potential risk of environmental contamination and opportunities to achieve good application.

This European Standard specifies the requirements and methods of their verification for the inspection of field crop sprayers in use. It relates mainly to the condition of the sprayer in respect of safety hazards for the test operator, the potential risk of environmental contamination and opportunities to achieve good application.

This standard specifies requirements and test methods for the design and performances of fixed and semi-mobile sprayers with respect to minimize the risk of environmental contamination. This standard applies in connection with ISO/DIS 16119-1:2010 which contains general requirements for pesticide application and liquid fertiliser applicators

This part of ISO 16119 specifies general requirements for the design and performance of sprayers, as defined in ISO 5681, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer. It also specifies the requirements for identification of the sprayer and certain of its components, and the minimum content of the instruction handbook. It is intended to be used with each of the other parts of ISO 16119, which give requirements specific to particular types of sprayers (see Annex A). This part of ISO 16119 is applicable to all types of sprayers used in agriculture, horticulture, forestry and other areas, except knapsack sprayers. It does not cover safety aspects (see ISO 4254-6). NOTE Knapsack sprayers are covered by ISO 19932, which deals with safety as well as environmental aspects. This part of ISO 16119 is not applicable to sprayers manufactured before the date of its publication.

This part of ISO 16119 specifies requirements and the means for their verification for the design and performance of sprayers for bush and tree crops, as defined in 3.1, and similar crops, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer. It is not applicable to human-mounted sprayers for bushes or trees. It is intended to be used with ISO 16119-1, which gives general requirements common to all the sprayer types covered by ISO 16119. When requirements of this part of ISO 16119 are different from those which are stated in ISO 16119-1, the requirements of this part of ISO 16119 take precedence over the requirements of ISO 16119-1 for machines within the scope of this part of ISO 16119. This part of ISO 16119 does not cover safety aspects (see ISO 4254-6). This part of ISO 16119 is not applicable to sprayers manufactured before the date of its publication.

This part of ISO 16119 specifies requirements and the means for their verification for the design and performance of horizontal boom sprayers, as defined in 3.1, with regard to minimizing the potential risk of environmental contamination during use, including misuse foreseeable by the manufacturer. It is intended to be used with ISO 16119-1, which gives general requirements common to all the sprayer types covered by ISO 16119. When requirements of this part of ISO 16119 are different from those which are stated in ISO 16119-1, the requirements of this part of ISO 16119 take precedence over the requirements of ISO 16119-1 for machines within the scope of this part of ISO 16119. It does not cover safety aspects (see ISO 4254-6). This part of ISO 16119 is not applicable to sprayers manufactured before the date of its publication.

This document specifies the requirements relating to:
Aluminium alloy AL P7010 Forging stock
for aerospace applications.

Test method for the determination of the volume of total residual in the tank for agricultural sprayers used for crop protection and fertilization.

This European standard specifies requirements for Bourdon tube (designated by B, see clause 12) indicating pressure gauges, vacuum gauges and combined vacuum and pressure gauges (compound gauges), with circular, spiral or coiled forms, from 40 to 250 nominal size with ranges up to 1600 bar for the measurement of gauge pressure. A reading of zero bar is atmospheric pressure.

Migrated from Progress Sheet (TC Comment) (2000-07-10): Change to UAP following TC resolution 52/1995.

This International Standard specifies the system of colour coding for identification of all types of hydraulic
spray nozzles, such as flat and cone nozzles used for the application of crop protection products in agriculture.
This International Standard is not applicable to nozzles where there is more than one component influencing
flow rate. It might not be applicable to liquid fertilizer applications.
It allows for flow recognition on small parts in order to avoid any confusion under normal conditions of use.