ISO/TC 189/WG 3 - Products for installation

This document applies to all bonded sheet waterproofing membranes that are used beneath ceramic tiling for internal and external tile installations on walls and floors. This document provides the terminology concerning the products and specifies the test methods and the values of performance requirements for bonded sheet waterproofing products associated with tile adhesives. Furthermore, this document specifies the evaluation of conformity and the classification and designation of all bonded sheet waterproofing products beneath ceramic tiling. NOTE 1 Bonded sheet waterproofing products can also be used beneath other types of tiles (natural and agglomerated stones etc.), where they do not adversely affect these materials. NOTE 2 This document does not address crack isolation, decoupling, sound control, thermal properties, or any aspect of membranes apart from waterproofing.

ISO 13007-5:2015 gives terminology concerning the products, and specifies test methods (see Annex A) and values of performance requirements, for liquid-applied waterproofing products associated with tile adhesives. It specifies the evaluation of conformity and the classification and designation of liquid-applied waterproofing products beneath ceramic tiling. It is applicable to all liquid-applied waterproofing membranes ? including polymer modified cementitious coatings, dispersions and reaction resin coatings ? used beneath ceramic tiling for internal and external tile installations on walls and floors. NOTE Liquid-applied waterproofing products can also be used beneath other types of tiles (natural and agglomerated stones, etc.), as long as an adverse reaction does not occur between the membrane and the alternative tile.

ISO 13007-1:2014 applies to ceramic tile adhesives for internal and external tile installations on walls and floors. ISO 13007-1:2014 gives the terminology, concerning the products, working methods, application properties, etc., for ceramic tile adhesives ISO 13007-1:2014 specifies the values of performance requirements for all ceramic tile adhesives [cementitious (C), dispersion (D) and reaction resin (R) adhesives].

ISO 13007:2013 describes the methods for determining the characteristics for adhesives used in the installation of ceramic tiles. The following test methods are described: determination of open time; determination of slip; determination of shear adhesion strength; determination of tensile adhesion strength; determination of transverse deformation.

ISO 13007-4:2013 describes methods for determining characteristics for grouts used in the installation of ceramic tiles. The following test methods are described: -determination of flexural and compressive strength; -determination of water absorption; -determination of shrinkage; -determination of resistance to abrasion; -determination of transverse deformation; -determination of chemical resistance.