ISO/TC 21/SC 6 - Foam and powder media and firefighting systems using foam and powder
Matérial à poudre et mousse et systèmes de lutte contre l'incendie à mousse et à poudre
General Information
This document specifies the essential properties and performance of liquid foam concentrates used to make foams for the extinguishment and inhibition of reignition of fires of Class A fuels. Minimum performance on certain test fires is specified. NOTE 1 Class A fires are fires involving solid materials, usually of an organic nature, in which combustion normally takes place with the formation of glowing embers (see 3.16). NOTE 2 Class A fuels can include materials such as vegetation, wood, cloth, paper, rubber and some plastics (see 3.17).
- Standard28 pagesEnglish languagesale 15% off
- Standard2 pagesEnglish languagesale 15% off
This document specifies the essential properties and performance of liquid foam concentrates used to make medium- or high-expansion foams or both for the control, the extinction and the inhibition of reignition of fires of water-immiscible liquids. Minimum performance on certain test fires is specified. These foams are suitable for top application to fires of water-immiscible liquid. Those foams that comply with ISO 7203-1 are also suitable for top application to fires of water-immiscible liquids.
- Standard41 pagesEnglish languagesale 15% off
- Standard41 pagesEnglish languagesale 15% off
This document specifies the essential properties and performance of liquid foam concentrates used to make low-expansion foams for the control, extinction and inhibition of re-ignition of fires of water-miscible liquids. Minimum performance on certain test fires is specified. These foams are suitable for top application to fires of water-miscible liquids. Those foams that also comply with ISO 7203-1 are also suitable for top application to fires of water-immiscible liquids. The foam concentrates can be suitable for use in non-aspirating sprayers or for subsurface application to liquid fires, but requirements specific to those applications are not included in this document.
- Standard39 pagesEnglish languagesale 15% off
- Standard39 pagesEnglish languagesale 15% off
This document specifies the essential properties and performance of liquid foam concentrates used to make low-expansion foams for the control, the extinction and the inhibition of reignition of fires of water-immiscible liquids. Minimum performance on certain test fires is specified. These foams are suitable for top application to fires of water-immiscible liquids. The foams that conform with ISO 7203-3 are also suitable for top application to fires of water-miscible liquids. The foam concentrates can be suitable for use in non-aspirating sprayers or for subsurface application to liquid fires, but the requirements specific to those applications are outside the scope of this document.
- Standard42 pagesEnglish languagesale 15% off
- Standard42 pagesEnglish languagesale 15% off
This document specifies requirements for the chemical and physical properties, and for minimum performance in defined test methods, of fire extinguishing powders suitable for use against fires of classes A, B, C and D. Requirements are also given for the information and data to be declared by the manufacturer. NOTE The classification of fires is given in ISO 3941.
- Standard27 pagesEnglish languagesale 15% off
ISO 7076-4:2016 specifies requirements and test methods for high expansion foam equipment of fixed-foam extinguishing systems for indoor or outdoor use or both.
- Standard11 pagesEnglish languagesale 15% off
- Standard11 pagesEnglish languagesale 15% off
ISO 7076-3:2016 specifies requirements and test methods for medium expansion foam equipment of fixed-foam extinguishing systems for indoor or outdoor use or both.
- Standard11 pagesEnglish languagesale 15% off
- Standard11 pagesEnglish languagesale 15% off
ISO 7076-6:2016 specifies requirements for compressed air foam systems (CAFS) in which foam concentrate and compressed air are continuously added to the water being discharged from the fire-fighting pump. This part of ISO 7076 is applicable to CAFS that can be permanently installed in fire-fighting vehicles, transportable, or mobile. ISO 7076-6:2016 specifies requirements for CAFS which are used at ambient temperatures ranging from ?10 °C to +40 °C. ISO 7076-6:2016 does not apply to stationary CAFS. ISO 7076-6:2016 does not apply to requirements for hazards related to handling foam concentrates, noise generated by CAFS, drives, auxiliary equipment, power sources, or pumps connected to the CAFS. ISO 7076-6:2016 does not specify requirements for special hazards arising from particular conditions under which CAFS are used, for example: - immunity against electromagnetic fields and electrostatic discharge; - operation without supervision; - events specific to the location where the CAFS is set up (e.g. on public roads); - handling of any equipment, devices, etc., which have to be connected to the CAFS or are joined to it (e.g. branch pipes, nozzles and pressure hoses); - decommissioning and disposal.
- Standard21 pagesEnglish languagesale 15% off
ISO 7076-5:2014 specifies requirements, test and assessment methods, and performance criteria for fixed compressed air foam equipment of fixed foam extinguishing systems for indoor or outdoor utilization, or both. Technical safety requirements concerning the design and manufacturing of drives, auxiliary equipment, sources of energy, or pumps are outside the scope of ISO 7076-5:2014. Special hazards arising from the particular conditions under which these systems are used are outside the scope of ISO 7076-5:2014. Hazards relating to any kind of mechanical, electrical, hydraulic, pneumatic, and other equipment dealt with by the respective standards for such equipment are outside the scope of ISO 7076-5:2014. Hazards arising from the noise of systems are outside the scope of ISO 7076-5:2014.
- Standard19 pagesEnglish languagesale 15% off
- Standard19 pagesEnglish languagesale 15% off
This International Standard specifies requirements and test methods for foam proportioning equipment of fixed foam extinguishing systems for indoor or outdoor use or both.
- Standard10 pagesEnglish languagesale 15% off
This International Standard specifies requirements and test methods for low expansion foam equipment of fixed-foam extinguishing systems for indoor or outdoor use or both. This International Standard is applicable to sprayers, branchpipes, monitors, low expansion foam generators, foam chambers, etc.
- Standard11 pagesEnglish languagesale 15% off
ISO 7202:2012 specifies requirements for the chemical and physical properties, and for minimum performance in defined test methods, of fire extinguishing powders suitable for use against fires of classes A, B, C and D. Requirements are also given for the information and data to be declared by the manufacturer.
- Standard23 pagesEnglish languagesale 15% off
ISO 7203-3:2011 specifies the essential properties and performance of liquid foam concentrates used to make low-expansion foams for the control, extinction and inhibition of reignition of fires of water-miscible liquids. Minimum performance on certain test fires is specified. These foams are suitable for top application to fires of water-miscible liquids. Those foams that also comply with ISO 7203-1 are also suitable for top application to fires of water-miscible liquids. The foam concentrates can be suitable for use in non-aspirating sprayers or for subsurface application to liquid fires, but requirements specific to those applications are not included in ISO 7203-3:2011.
- Standard39 pagesEnglish languagesale 15% off
ISO 7203-1:2011 specifies the essential properties and performance of liquid foam concentrates used to make low-expansion foams for the control, extinction and inhibition of reignition of fires of water-immiscible liquids. Minimum performance on certain test fires is specified. These foams are suitable for top application to fires of water-immiscible liquids. Those foams that comply with the future ISO 7203-3 are also suitable for top application to fires of water-miscible liquids. The foam concentrates can be suitable for use in non-aspirating sprayers or for subsurface application to liquid fires, but requirements specific to those applications are not included in ISO 7203-1:2011.
- Standard39 pagesEnglish languagesale 15% off
ISO 7203-2:2011 specifies the essential properties and performance of liquid foam concentrates used to make medium- or high-expansion foams or both for the control, extinction and inhibition of reignition of fires of water-immiscible liquids. Minimum performance on certain test fires is specified. These foams are suitable for top application to fires of water-immiscible liquid. Those foams that comply with ISO 7203-1 are also suitable for top application to fires of water-immiscible liquids.
- Standard38 pagesEnglish languagesale 15% off
- Standard19 pagesEnglish languagesale 15% off
- Standard20 pagesFrench languagesale 15% off
Contains the essential properties and requirements of liquid foam concentrates used to make low expansion foam for the control and extinction of fires of water-immiscible liquids.
- Standard25 pagesEnglish languagesale 15% off
- Standard26 pagesFrench languagesale 15% off
- Standard26 pagesFrench languagesale 15% off
Contains the essential properties and requirements of liquid foam concentrates used to make medium and/or high expansion foam for the control and extinction of fires of water-immiscible liquids.
- Standard26 pagesEnglish languagesale 15% off
- Standard26 pagesFrench languagesale 15% off
- Standard26 pagesFrench languagesale 15% off
Specifies requirements for the chemical and physical properties and for minimum performance in defined test methods of extinguishing powders suitable for use against fires of classes A, B and C. Requirements are also given for information and data to be declared by the manufacturer.
- Standard12 pagesEnglish languagesale 15% off
- Standard12 pagesFrench languagesale 15% off
- Standard12 pagesFrench languagesale 15% off
- Standard10 pagesEnglish languagesale 15% off
- Standard10 pagesFrench languagesale 15% off
- Standard5 pagesEnglish languagesale 15% off
- Standard5 pagesFrench languagesale 15% off