CEN/TC 202/WG 1 - Die casting

This document applies to high pressure die casting machines:
a)       hot-chamber die casting machines (horizontal die closing system);
b)       horizontal cold-chamber die casting machines (horizontal die closing system).
This document applies to high pressure die casting units, i.e. high pressure die casting machines (HPDCM), and their interfaces with the following ancillary equipment:
a)       die;
b)       melting, holding and dosing furnaces (see ISO 13577-1:2016);
c)        metal feeding equipment;
d)       inserting and removal devices;
e)       spraying appliances;
f)         heating and cooling devices for the die.
This ancillary equipment itself is not covered.
Additional risks arising from the material being cast are not covered.
This document does not apply to either low pressure die casting machines or gravity die casting machines, or both.
This document deals with all significant hazards, hazardous situations and events relevant to pressure die casting machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4).
This includes hazards coming from intentional interactions as well as unintentional but foreseeable interactions between movable parts of the machine and persons.
This document provides the requirements to be met by the manufacturer to ensure the safety of persons and property during transport, commissioning, use, de-commissioning and maintenance periods, as well as in the event of foreseeable failures or malfunctions that can occur in the equipment.

This European Standard specifies the safety requirements for pressure metal diecasting units.
It applies to pressure diecasting machines and to the interfaces with the following ancillary equipment:
-   die,
-   melting, holding and dosing furnaces (see EN 746-1),
-   metal feeding equipment,
-   inserting and removal devices,
-   spraying appliances,
-   heat exchanger for the die.
This ancillary equipment itself is not covered.
Additional risks arising from the material being cast are not covered.
This standard does not apply to low pressure diecasting machines and/or gravity diecasting machines.
This standard deals with all significant hazards, hazardous situations and events relevant to pressure diecasting machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). It provides the requirements to be met by the manufacturer to ensure the safety of persons and property during transport, commissioning, use, de-commissioning and maintenance periods, as well as in the event of foreseeable failures or malfunctions that can occur in the equipment.
This document is not applicable to pressure metal diecasting units/machinery which are manufactured before the date of its publication as EN.

This European Standard specifies the safety requirements for pressure metal diecasting units.
It applies to pressure diecasting machines and to the interfaces with the following ancillary equipment:
   die,
   melting, holding and dosing furnaces (see EN 746-1),
   metal feeding equipment,
   inserting and removal devices,
   spraying appliances,
   heat exchanger for the die.
This ancillary equipment itself is not covered.
Additional risks arising from the material being cast are not covered.
This standard does not apply to low pressure diecasting machines and/or gravity diecasting machines.
This standard deals with all significant hazards, hazardous situations and events relevant to pressure diecasting machines when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). It provides the requirements to be met by the manufacturer to ensure the safety of persons and property during transport, commissioning, use, de-commissioning and maintenance periods, as well as in the event of foreseeable failures or malfunctions that may occur in the equipment.
This document is not applicable to pressure metal diecasting units/machinery which are manufactured before the date of its publication as EN.

This European standard specifies the safety requirements for high pressure metal diecasting units.  It applies to high pressure diecasting machines and to integration of ancillary equipment such as metal feeding, inserting and removal, or spraying appliances.  This standard does not apply to low pressure diecasting machines, gravity casting machines nor to wax model moulding machines.  This standard provides the requirements to be met by the manufacturer to ensure the safety of persons and property during construction, transport, commissioning, use, de-commissioning and maintenance periods, as well as in the event of foreseeable faults or malfunctions which may occur in the equipment. It defines the safety requirements at all stages in the life of the equipment and its design, arrangement, construction and use.  This standard applies to equipment which is placed on the market after the date of issue of this standard.