SIST ISO 10843:2012/AC 1:2012

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Akustika - Metode za opis in fizikalne meritve posameznih ali zaporednih impulzov -
Popravek (ISO 10843:1997/Cor 1:2009)Acoustics - Methods for the description and physical measurement of single impulses or series of impulses - Corrigendum (ISO 10843:1997/Cor 1:2009)17.140.20Emisija hrupa naprav in opremeNoise emitted by machines and equipmentICS:Ta slovenski standard je istoveten z:ISO 10843:1997/Cor 1:2009SIST ISO 10843:2012/AC 1:2012en01-februar-2012SIST ISO 10843:2012/AC 1:2012SLOVENSKI
STANDARD
ICS
17.140.20 Ref. No. ISO 10843:1997/Cor.1:2009(E)©
ISO 2009 – All rights reserved Published in Switzerland
INTERNATIONAL STANDARD ISO 10843:1997 TECHNICAL CORRIGENDUM 1 Published 2009-04-15 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION •
• ORGANISATION INTERNATIONALE DE NORMALISATION
Acoustics — Methods for the description and physical measurement of single impulses or series of impulses TECHNICAL CORRIGENDUM 1 Acoustique — Métrique et techniques pour le mesurage physique de bruits impulsionnels isolés ou en courtes rafales RECTIFICATIF TECHNIQUE 1 Technical Corrigendum 1 to ISO 10843:1997 was prepared by Technical Committee ISO/TC 43, Acoustics, Subcommittee SC 1, Noise.
Page ii, Contents Under “Annexes”, delete Annexes D and E. Add “Bibliography”. Page iii, Foreword, last line Delete “Annexes A to E”, insert “Annexes A to C”. Page 1, Clause 2 Delete all references, and insert: “IEC 60050-801:1994, International Electrotechnical Vocabulary — Chapter 801: Acoustics and electroacoustics IEC 60942:2003, Electroacoustics — Sound calibrators SIST ISO 10843:2012/AC 1:2012

ISO 10843:1997/Cor.1:2009(E) 2 ©
ISO 2009 – All rights reserved IEC 61094-4:1995, Measurement microphones — Part 4: Specifications for working standard microphones IEC 61260:1995, Electroacoustics — Octave-band and fractional-octave-band filters IEC 61672-1:2002, Electroacoustics — Sound level meters — Part 1: Specifications” Page 2, 3.1.1, Note 1 Delete “and annex E”. Delete “reference [25]”, insert “reference [27]”. Page 2, 3.1.2, Note Delete “and annex E”. Delete “reference [25]”, insert “reference [27]”. Page 2, 3.1.3, Note Delete “and annex E”. Delete “reference [34]”, insert “reference [27]”. Page 2, 3.1.4, line 2 Delete “instantaneous”. Page 4, 3.1.14, Note 1 Delete “20 µPa2·s”, insert “(20 µPa)2 s = 4 × 10−10 Pa2 s”. Page 5, 4.1, paragraph 2, lines 2 and 3 Delete “IEC 1094-4”, insert “IEC 61094-4”. Page 6, 4.3.2.1, line 1 Delete “instantaneous”. Page 7, 4.3.4 Delete “IEC 651 and IEC 804”, insert “IEC 61672-1”. Page 7, 4.3.6 Delete “IEC 651 for type 1”, insert “IEC 61672-1 for class 1”. Delete “; they should preferably meet the requirements for type 0 instruments”. Page 7, 4.3.7 Delete “IEC 1260”, insert “IEC 61260”. Page 7, 4.3.7, Note, last line Delete “European Community Machinery Directive 89/392/EEC”, insert “European Community Machinery Directive 2006/42/EC”. SIST ISO 10843:2012/AC 1:2012

ISO 10843:1997/Cor.1:2009(E) ©
ISO 2009 – All rights reserved 3 Page 7, 4.5.1.1, lines 1 and 2 Delete “type 1 requirements of IEC 651 and IEC 804 and should comply with the additional requirements of annex D.”, insert “class 1 requirements of IEC 61672-1.” Page 7, 4.5.1.1, Notes Delete “NOTES”. Delete the first note entirely. Delete “2”, insert “NOTE”. Page 8, 4.5.1.1, Note 2, last paragraph, line 3 Delete “SEL”, insert “single event sound exposure level”. Page 8, 4.5.1.1, Note 2, last line Delete “IEC 651 and in annex D.”, insert “IEC 61672-1.” Page 8, 4.5.2, lines 3 and 4 (twice) Delete “IEC 1094-4”, insert “IEC 61094-4”. Page 9, 5.3.1, line 2 Delete “IEC 942”, insert “IEC 60942”. Page 10, 5.5, line 6 Delete “BIPM/IEC/IFCC/ISO/IUPAC/IUPAP/OIML guide [25]”, insert “ISO/IEC Guide 98-3 [26]”. Page 11, 6.1.2, paragraph 2, line 1 Delete “IEC 1260”, insert “IEC 61260”. Page 13, Clause A.1, paragraph 1, penultimate line Delete “annex E,”. Page 19, Clause C.1, paragraph 1, line 2 Delete “(see annex E, reference [4])”. Page 19, Clause C.2, line 3 Delete “(see annex E, reference [5])”. Page 19, Clause C.3 Delete “IEC 651:1979, clause 9 and IEC 804:1985, clause 9”, insert “IEC 61672-2:2003, clause 9”. Page 19, Clause C.4 Delete “IEC 804:1985”, insert “IEC 61672-2:2003”. SIST ISO 10843:2012/AC 1:2012

ISO 10843:1997/Cor.1:2009(E) 4 ©
ISO 2009 – All rights reserved Page 20 Delete Annex D. Page 21 to 23 Delete Annex E, insert the following Bibliography. Bibliography [1] ISO 1996-1, Acoustics — Description, measurement and assessment of environmental noise — Part 1: Basic quantities and assessment procedures [2] ISO 1996-2, Acoustics — Description, measurement and assessment of environmental noise — Part 2: Determination of environmental noise levels [3] ISO 3740, Acoustics — Determination of sound power levels of noise sources — Guidelines for the use of basic standards [4] ISO 3741, Acoustics — Determination of sound power levels of noise sources using sound pressure — Precision methods for reverberation rooms [5] ISO 3743-1, Acoustics — Determination of sound power levels of noise sources — Engineering methods for small, movable sources in reverberant fields — Part 1: Comparison method for hard-walled test rooms [6] ISO 3743-2, Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering methods for small, movable sources in reverberant fields — Part 2: Methods for special reverberation test rooms [7] ISO 3744, Acoustics — Determination of sound power levels of noise sources using sound pressure — Engineering method in an essentially free field over a reflecting plane [8] ISO 3745, Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Precision methods for free-field test roo
...