SIST EN ISO 3887:2024

SLOVENSKI STANDARD
SIST EN ISO 3887:2024
01-februar-2024
Jekla - Določevanje globine razogličene plasti (ISO 3887:2023)
Steels - Determination of the depth of decarburization (ISO 3887:2023)
Stahl - Bestimmung der Entkohlungstiefe (ISO 3887:2023)
Aciers - Détermination de la profondeur de décarburation (ISO 3887:2023)
Ta slovenski standard je istoveten z: EN ISO 3887:2023
ICS:
77.040.99 Druge metode za Other methods of testing of
preskušanje kovin metals
77.080.20 Jekla Steels
SIST EN ISO 3887:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 3887:2024

---------------------- Page: 2 ----------------------
SIST EN ISO 3887:2024


EN ISO 3887
EUROPEAN STANDARD

NORME EUROPÉENNE

October 2023
EUROPÄISCHE NORM
ICS 77.040.99 Supersedes EN ISO 3887:2018
English Version

Steels - Determination of the depth of decarburization (ISO
3887:2023)
Aciers - Détermination de la profondeur de Stahl - Bestimmung der Entkohlungstiefe (ISO
décarburation (ISO 3887:2023) 3887:2023)
This European Standard was approved by CEN on 18 September 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3887:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 3887:2024
EN ISO 3887:2023 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 3887:2024
EN ISO 3887:2023 (E)
European foreword
This document (EN ISO 3887:2023) has been prepared by Technical Committee ISO/TC 17 "Steel" in
collaboration with Technical Committee CEN/TC 459/SC 1 “Test methods for steel (other than chemical
analysis)” the secretariat of which is held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2024, and conflicting national standards shall be
withdrawn at the latest by April 2024.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 3887:2018.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 3887:2023 has been approved by CEN as EN ISO 3887:2023 without any modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 3887:2024

---------------------- Page: 6 ----------------------
SIST EN ISO 3887:2024
INTERNATIONAL ISO
STANDARD 3887
Fourth edition
2023-09
Steels — Determination of the depth
of decarburization
Aciers — Détermination de la profondeur de décarburation
Reference number
ISO 3887:2023(E)
© ISO 2023

...