SIST EN ISO 19008:2018
(Main)Standard cost coding system for oil and gas production and processing facilities (ISO 19008:2016)
Standard cost coding system for oil and gas production and processing facilities (ISO 19008:2016)
ISO 19008:2016 describes the standard cost coding system (SCCS) that classifies costs and quantities related to exploration, development, operation and removal of oil and gas production and processing facilities and to the petroleum, petrochemical and natural gas industry. Upstream, midstream, downstream and petrochemical business categories are included.
The SCCS for coding of costs is applicable to:
- cost estimating;
- actual cost monitoring and reporting;
- collection of final quantities and cost data;
- standardized exchange of cost data among organizations;
- implementation in cost systems.
ISO 19008:2016 is intended for users such as the following:
a) owner/operator/company (individual or grouped entity that is entitled or contributes to operations in the exploitation of oil and gas fields);
b) industry/trade associations;
c) manufacturers/contractors;
d) cost engineering service contractors, cost system providers, benchmarking providers, etc.;
e) authorities/regulatory bodies.
ISO 19008:2016 does not apply to the following:
1) cost classification relevant to cost accounting rules, specific contractual agreements, local requirements for cost reporting to national bodies, government rules and tax regulations, authorization for expenditure (AFE), billing purposes etc.;
2) specific project breakdown structures (e.g. work breakdown structures, contract breakdown structures, organizational breakdown structure) or asset breakdowns (e.g. TAG/system codes, area/module breakdown structure) which are and will remain unique.
However, this International Standard can provide a basis for the establishment of such specific classification systems.
Standardkosten-Codierungssystem für die Öl- und Gasproduktion und Verarbeitungsanlagen (ISO 19008:2016)
Système de codage du coût standard pour la production de gaz et d'huile, et des installations de traitement (ISO 19008:2016)
ISO 19008:2016 décrit le système de codage des coûts standard (SCCS) qui classe les coûts et les quantités liés à la prospection, au développement, à l'exploitation et au retrait des installations de production et de traitement de pétrole et de gaz, et ceux liés à l'industrie du pétrole, de la pétrochimie et du gaz naturel. Les catégories d'activité amont, intermédiaire, aval et pétrochimique sont incluses.
Le SCCS destiné au codage des coûts s'applique:
- à l'estimation de coûts;
- au contrôle et à la présentation des coûts réels;
- à la collecte des quantités finales et des données relatives aux coûts;
- à l'échange normalisé, entre les organismes, de données relatives aux coûts;
- à la mise en ?uvre dans les systèmes de gestion des coûts.
La présente Norme internationale est destinée, entre autres, aux utilisateurs suivants:
a) propriétaires/exploitants/sociétés (individuelles ou groupes autorisés/contribuant à l'exploitation des gisements de pétrole et de gaz);
b) associations professionnelles;
c) fabricants/sous-traitants;
d) sous-traitants de services d'ingénierie des coûts, fournisseurs de systèmes de gestion des coûts, fournisseurs d'analyse comparative, etc.;
e) autorités/organismes de réglementation.
ISO 19008:2016 ne couvre pas les aspects suivants:
1) la classification des coûts qui relève de règles de comptabilité analytique, des ententes contractuelles spécifiques, des exigences locales relatives à la présentation des coûts auprès des institutions nationales, des règles gouvernementales et de la règlementation fiscale, des autorisations d'engagement de dépenses (AFE), de la facturation, etc.;
2) les organigrammes spécifiques à un projet (par exemple: les organigrammes techniques des tâches, la structure de répartition des contrats, les organigrammes organisationnels) ou les répartitions d'actifs (par exemple: codes de systèmes/TAG, organigramme de secteur/module) qui sont et resteront uniques au projet.
Toutefois, la présente Norme internationale peut servir de base pour l'établissement de ce type de système de classification spécifique.
Standardni sistem kodiranja stroškov pri proizvodnji nafte in plina ter predelovalnih zmogljivosti (ISO 19008:2016)
Standard ISO 19008:2016 opisuje standardni sistem kodiranja stroškov (SCCS), ki razvršča stroške in količine, povezane z raziskovanjem, razvojem, upravljanjem in odstranjevanjem obratov za proizvajanje ter obdelavo nafte in plina ter z naftno in petrokemično industrijo ter industrijo za predelavo zemeljskega plina. Nabavne, vmesne in prodajne petrokemične poslovne kategorije so vključene.
Standardni sistem kodiranja stroškov se uporablja za:
– ocenjevanje stroškov;
– spremljanje dejanskih stroškov in poročanje o njih;
– zbiranje končnih podatkov o količinah in stroških;
– standardizirano izmenjavo podatkov o stroških med organizacijami;
– vpeljavo v stroškovne sisteme.
Standard ISO 19008:2016 je namenjen naslednjim uporabnikom:
a) lastniku/upravljavcu/družbi (posamezniku ali entiteti, ki lahko izvaja ali prispeva k izvajanju operacij na področju izkoriščanja nafte in plina);
b) industrijskim/trgovskim združenjem;
c) proizvajalcem/pogodbenim izvajalcem;
d) pogodbenim izvajalcem za stroškovno inženirstvo, ponudnikom stroškovnih sistemov, izvajalcem primerjalnih analiz itd.;
e) organom/regulativnim telesom.
Standard ISO 19008:2016 se ne uporablja za:
1) razvrščanje stroškov v povezavi s pravili stroškovnega računovodstva, posebnimi pogodbenimi dogovori, lokalnimi zahtevami za poročanje stroškov nacionalnim organom, vladnimi pravili in davčnimi predpisi, dovoljenjem za porabo (AFE), obračunavanjem itd.;
2) razčlenitvene strukture za posamezen projekt (npr. razčlenitvene strukture za delo, razčlenitvene strukture za pogodbe, razčlenitvene strukture za organizacije) ali razčlenitev sredstev (npr. TAG/sistemske kode, razčlenitvena struktura za območje/modul), ki so in bodo ostale edinstvene.
Kljub temu lahko ta mednarodni standard zagotovi podlago za vzpostavitev takega posebnega sistema razvrščanja.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 19008:2018
01-junij-2018
Standardni sistem kodiranja stroškov pri proizvodnji nafte in plina ter
predelovalnih zmogljivosti (ISO 19008:2016)
Standard cost coding system for oil and gas production and processing facilities (ISO
19008:2016)
Standardkosten-Codierungssystem für die Öl- und Gasproduktion und
Verarbeitungsanlagen (ISO 19008:2016)
Système de codage du coût standard pour la production de gaz et d'huile, et des
installations de traitement (ISO 19008:2016)
Ta slovenski standard je istoveten z: EN ISO 19008:2018
ICS:
75.020 Pridobivanje in predelava Extraction and processing of
nafte in zemeljskega plina petroleum and natural gas
SIST EN ISO 19008:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 19008:2018
---------------------- Page: 2 ----------------------
SIST EN ISO 19008:2018
EN ISO 19008
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2018
EUROPÄISCHE NORM
ICS 75.020
English Version
Standard cost coding system for oil and gas production
and processing facilities (ISO 19008:2016)
Système de codage des coûts standard pour les Standardkosten-Codierungssystem für die Öl- und
installations de production et de traitement du pétrole Gasproduktion und Verarbeitungsanlagen (ISO
et du gaz (ISO 19008:2016) 19008:2016)
This European Standard was approved by CEN on 26 January 2018.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19008:2018 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 19008:2018
EN ISO 19008:2018 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 19008:2018
EN ISO 19008:2018 (E)
European foreword
The text of ISO 19008:2016 has been prepared by Technical Committee ISO/TC 67 "Materials,
equipment and offshore structures for petroleum, petrochemical and natural gas industries" of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 19008:2018 by
Technical Committee CEN/TC 12 “Materials, equipment and offshore structures for petroleum,
petrochemical and natural gas industries” the secretariat of which is held by NEN and CYS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2018, and conflicting national standards
shall be withdrawn at the latest by September 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document is intended to be applicable to the petroleum, petrochemical and natural gas industries.
However, it is recognized that several different perspectives of costs can be identified in order to meet
either internal or external requirements of each organization. Current data processing and information
integration standards are developing. This has been reflected in the underlying design principles for
faceted classification systems included in this document. However, the actual coding and classifications
in the first edition of this document have not been established to take account of all these principles.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 19008:2016 has been approved by CEN as EN ISO 19008:2018 without any modification.
3
---------------------- Page: 5 ----------------------
SIST EN ISO 19008:2018
---------------------- Page: 6 ----------------------
SIST EN ISO 19008:2018
INTERNATIONAL ISO
STANDARD 19008
First edition
2016-08-15
Standard cost coding system for oil
and gas production and processing
facilities
Système de codage du coût standard pour la production de gaz et
d’huile, et des installations de traitement
Reference number
ISO 19008:2016(E)
©
ISO 2016
---------------------- Page: 7 ----------------------
SIST EN ISO 19008:2018
ISO 19008:2016(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 19008:2018
ISO 19008:2016(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Terms and definitions . 1
3 Abbreviated items . 2
4 Application . 3
4.1 Users of this International Standard . 3
4.2 Principles . 3
4.2.1 Coding basis . 3
4.2.2 Relationship between the codes . 3
4.3 Requirements . 4
4.4 Extension . 4
4.5 Reporting requirements . 4
5 Conformance . 5
Annex A (normative) Physical breakdown structure – PBS codes . 6
Annex B (normative) Standard activity breakdown – SAB codes . 7
Annex C (normative) Code of resource – COR codes . 8
Annex D (informative) Example of use . 9
Bibliography .10
© ISO 2016 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 19008:2018
ISO 19008:2016(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 67, Materials, equipment and offshore structures
for petroleum, petrochemical and natural gas industries.
iv © ISO 2016 – All rights reserved
---------------------- Page: 10 ----------------------
SIST EN ISO 19008:2018
ISO 19008:2016(E)
Introduction
This International Standard provides the specifications for a standard cost coding system (SCCS) to be
used for classification of costs associated with the development and operation of oil and gas production
and processing facilities.
The purpose of the SCCS is to enable the costs of exploration, development projects and operations to be
organized, collected and reported allowing analysis and comparison across (parts of) projects and assets.
This International Standard is designed to provide a uniform coding basis for both estimate preparation
and collecting/collating related historical data in order to facilitate benchmarking and analysis. It is
also intended to provide the basis for exchange of cost and quantity data between parties, e.g. between
companies or contractors or across projects.
This International Standard establishes a coding system that enables any in-house or commercial data
system to meet these data exchange requirements.
The SCCS may also be utilized to capture consistent data for physical quantities, e.g. weight, length,
areas, volumes, flow rate, work hours and durations. This will facilitate the development and measure
of unit costs and cost metrics.
The scope of work that is being classified has three key aspects (also known as facets) namely, physical
asset [coded by the physical breakdown structure (PBS)], activity [coded by the standard activity
breakdown structure (SAB)] and resource [coded by the code of resource (COR)].
Hence the SCCS is composed of three complementary and disjoint sub-classifications, each one dealing
with one of the aspects. This is technically known as a poly-hierarchical or faceted classification system.
The main body of this International Standard contains the principles and usage of the SCCS. It
also includes implementation requirements for the expansion of the coding system by individual
organisations.
The annexes include:
— the SCCS codes their names and description;
— examples of use of the codes.
Application of ISO 19008 can also be useful when performing production assurance, reliability
management and Life Cycle Cost (LCC) analysis; see ISO 20815, ISO 14224 and ISO 15663.
© ISO 2016 – All rights reserved v
---------------------- Page: 11 ----------------------
SIST EN ISO 19008:2018
---------------------- Page: 12 ----------------------
SIST EN ISO 19008:2018
INTERNATIONAL STANDARD ISO 19008:2016(E)
Standard cost coding system for oil and gas production and
processing facilities
1 Scope
This International Standard describes the standard cost coding system (SCCS) that classifies costs
and quantities related to exploration, development, operation and removal of oil and gas production
and processing facilities and to the petroleum, petrochemical and natural gas industry. Upstream,
midstream, downstream and petrochemical business categories are included.
The SCCS for coding of costs is applicable to:
— cost estimating;
— actual cost monitoring and reporting;
— collection of final quantities and cost data;
— standardized exchange of cost data among organizations;
— implementation in cost systems.
This International Standard is intended for users such as the following:
a) owner/operator/company (individual or grouped entity that is entitled or contributes to operations
in the exploitation of oil and gas fields);
b) industry/trade associations;
c) manufacturers/contractors;
d) cost eng
...
SLOVENSKI STANDARD
oSIST prEN ISO 19008:2017
01-julij-2017
Standardni sistem kodiranja stroškov pri proizvodnji nafte in plina ter
predelovalnih zmogljivosti (ISO 19008:2016)
Standard cost coding system for oil and gas production and processing facilities (ISO
19008:2016)
Standardkosten-Codierungssystem für die Öl- und Gasproduktion und
Verarbeitungsanlagen (ISO 19008:2016)
Système de codage du coût standard pour la production de gaz et d'huile, et des
installations de traitement (ISO 19008:2016)
Ta slovenski standard je istoveten z: prEN ISO 19008
ICS:
75.020 Pridobivanje in predelava Extraction and processing of
nafte in zemeljskega plina petroleum and natural gas
oSIST prEN ISO 19008:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 19008:2017
---------------------- Page: 2 ----------------------
oSIST prEN ISO 19008:2017
INTERNATIONAL ISO
STANDARD 19008
First edition
2016-08-15
Standard cost coding system for oil
and gas production and processing
facilities
Système de codage du coût standard pour la production de gaz et
d’huile, et des installations de traitement
Reference number
ISO 19008:2016(E)
©
ISO 2016
---------------------- Page: 3 ----------------------
oSIST prEN ISO 19008:2017
ISO 19008:2016(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2016, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2016 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 19008:2017
ISO 19008:2016(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Terms and definitions . 1
3 Abbreviated items . 2
4 Application . 3
4.1 Users of this International Standard . 3
4.2 Principles . 3
4.2.1 Coding basis . 3
4.2.2 Relationship between the codes . 3
4.3 Requirements . 4
4.4 Extension . 4
4.5 Reporting requirements . 4
5 Conformance . 5
Annex A (normative) Physical breakdown structure – PBS codes . 6
Annex B (normative) Standard activity breakdown – SAB codes . 7
Annex C (normative) Code of resource – COR codes . 8
Annex D (informative) Example of use . 9
Bibliography .10
© ISO 2016 – All rights reserved iii
---------------------- Page: 5 ----------------------
oSIST prEN ISO 19008:2017
ISO 19008:2016(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the meaning of ISO specific terms and expressions related to conformity
assessment, as well as information about ISO’s adherence to the WTO principles in the Technical
Barriers to Trade (TBT) see the following URL: Foreword - Supplementary information
The committee responsible for this document is ISO/TC 67, Materials, equipment and offshore structures
for petroleum, petrochemical and natural gas industries.
iv © ISO 2016 – All rights reserved
---------------------- Page: 6 ----------------------
oSIST prEN ISO 19008:2017
ISO 19008:2016(E)
Introduction
This International Standard provides the specifications for a standard cost coding system (SCCS) to be
used for classification of costs associated with the development and operation of oil and gas production
and processing facilities.
The purpose of the SCCS is to enable the costs of exploration, development projects and operations to be
organized, collected and reported allowing analysis and comparison across (parts of) projects and assets.
This International Standard is designed to provide a uniform coding basis for both estimate preparation
and collecting/collating related historical data in order to facilitate benchmarking and analysis. It is
also intended to provide the basis for exchange of cost and quantity data between parties, e.g. between
companies or contractors or across projects.
This International Standard establishes a coding system that enables any in-house or commercial data
system to meet these data exchange requirements.
The SCCS may also be utilized to capture consistent data for physical quantities, e.g. weight, length,
areas, volumes, flow rate, work hours and durations. This will facilitate the development and measure
of unit costs and cost metrics.
The scope of work that is being classified has three key aspects (also known as facets) namely, physical
asset [coded by the physical breakdown structure (PBS)], activity [coded by the standard activity
breakdown structure (SAB)] and resource [coded by the code of resource (COR)].
Hence the SCCS is composed of three complementary and disjoint sub-classifications, each one dealing
with one of the aspects. This is technically known as a poly-hierarchical or faceted classification system.
The main body of this International Standard contains the principles and usage of the SCCS. It
also includes implementation requirements for the expansion of the coding system by individual
organisations.
The annexes include:
— the SCCS codes their names and description;
— examples of use of the codes.
Application of ISO 19008 can also be useful when performing production assurance, reliability
management and Life Cycle Cost (LCC) analysis; see ISO 20815, ISO 14224 and ISO 15663.
© ISO 2016 – All rights reserved v
---------------------- Page: 7 ----------------------
oSIST prEN ISO 19008:2017
---------------------- Page: 8 ----------------------
oSIST prEN ISO 19008:2017
INTERNATIONAL STANDARD ISO 19008:2016(E)
Standard cost coding system for oil and gas production and
processing facilities
1 Scope
This International Standard describes the standard cost coding system (SCCS) that classifies costs
and quantities related to exploration, development, operation and removal of oil and gas production
and processing facilities and to the petroleum, petrochemical and natural gas industry. Upstream,
midstream, downstream and petrochemical business categories are included.
The SCCS for coding of costs is applicable to:
— cost estimating;
— actual cost monitoring and reporting;
— collection of final quantities and cost data;
— standardized exchange of cost data among organizations;
— implementation in cost systems.
This International Standard is intended for users such as the following:
a) owner/operator/company (individual or grouped entity that is entitled or contributes to operations
in the exploitation of oil and gas fields);
b) industry/trade associations;
c) manufacturers/contractors;
d) cost engineering service contractors, cost system providers, benchmarking providers, etc.;
e) authorities/regulatory bodies.
This International standard does not apply to the following:
1) cost classification relevant to cost accounting rules, specific contractual agreements, local
requirements for cost reporting to national bodies, government rules and tax regulations,
authorization for expenditure (AFE), billing purposes etc.;
2) specific project breakdown structures (e.g. work breakdown structures, contract breakdown
structures, organizational breakdown structure) or asset breakdowns (e.g. TAG/system codes,
area/module breakdown structure) which are and will remain unique.
However, this International Standard can provide a basis for the establishment of such specific
classification systems.
2 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
2.1
code of resource
COR
hierarchical structure of SCCS that classifies all project resources according to the type of
contract/resource that is involved in the activity and has an associated set of rates
© ISO 2016 – All rights reserved 1
---------------------- Page: 9 ----------------------
oSIST prEN ISO 19008:2017
ISO 19008:2016(E)
2.2
cost item
particular part/level that is coded/classified using the SCCS
EXAMPLE “Procurement of piping” would be a cost item in the “development of facility X”.
2.3
cost time resource
CTR
document that describes each major element in the work breakdown structure, including a statement
of work describing the work content, resources required, the time frame of the work element and a cost
estimate
2.4
faceted classification system
collection of facet classifications that allows the classification of an object
EXAMPLE This International Standard specifies a faceted classification system for objects used in cost
estimating for oil and gas production and processing facilities.
2.5
scope of work
SOW
division of work to be performed under a formal agreement (project assignment), contract or
subcontract in the completion of a project
2.6
physical breakdown structure
PBS
hierarchical structure of SCCS that defines the types of physical asset components of field installations
being delivered by the activity
2.7
standard cost coding system
SCCS
standard system for classification and coding cost estimates, monito
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.