iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST CR 10299:2000

(Main)

Guidelines for the preparation of standard routine methods with wavelength-dispersive X-ray fluorescence spectrometry

Guidelines for the preparation of standard routine methods with wavelength-dispersive X-ray fluorescence spectrometry

X-ray Fluorescence Spectrometry (XRF) has been used for several decades as an important analytical tool for production analysis. XRF is characterised by its speed and high precision over a wide concentration range and since the technique in most cases is used as an relative method the limitations are often connected to the quality of the calibration samples. The technique is well established and most of its physical properties are well known.

Navodilo za pripravo standardnih postopkov z valovno-disperzno rentgensko fluorescenčno spektrometrijo

General Information

Status
Withdrawn
Publication Date
31-Mar-2000
Withdrawal Date
06-Jul-2023
ICS
71.040.50 - Physicochemical methods of analysis
Technical Committee
IFEK - Ferrous metals
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
07-Jul-2023
Due Date
30-Jul-2023
Completion Date
07-Jul-2023
Mandate
M/BC/CEN/89/10 - ECISS - 3rd programme
Ref Project
CR 10299:1998 - Guidelines for the preparation of standard routine methods with wavelength-dispersive X-ray fluorescence spectrometry

Relations

Revises
SIST-TP CEN/TR 10377:2023 - Guidelines for the preparation of standard routine methods with wavelength-dispersive X-ray fluorescence spectrometry
Effective Date
19-Jan-2023

Buy Standard

CR 10299:2000CR 10299:2000
PreviousNext
Standardization document
CR 10299:2000
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST CR 10299:2000
01-april-2000
1DYRGLOR]DSULSUDYRVWDQGDUGQLKSRVWRSNRY]YDORYQRGLVSHU]QRUHQWJHQVNR
IOXRUHVFHQþQRVSHNWURPHWULMR
Guidelines for the preparation of standard routine methods with wavelength-dispersive X-
ray fluorescence spectrometry
Ta slovenski standard je istoveten z: CR 10299:1998
ICS:
71.040.50 Fizikalnokemijske analitske Physicochemical methods of
metode analysis
SIST CR 10299:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST CR 10299:2000

---------------------- Page: 2 ----------------------

SIST CR 10299:2000

---------------------- Page: 3 ----------------------

SIST CR 10299:2000

---------------------- Page: 4 ----------------------

SIST CR 10299:2000

---------------------- Page: 5 ----------------------

SIST CR 10299:2000

---------------------- Page: 6 ----------------------

SIST CR 10299:2000

---------------------- Page: 7 ----------------------

SIST CR 10299:2000

---------------------- Page: 8 ------
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST-TP CEN/TR 10377:2023(Main)
Guidelines for the preparation of standard routine methods with wavelength-dispersive X-ray fluorescence spectrometry
CEN/TR 10377:2023

X-ray Fluorescence Spectrometry (XRF) has been used for several decades as an important analytical tool for production analysis. XRF is characterised by its speed and high precision over a wide concentration range and since the technique in most cases is used as an relative method the limitations are often connected to the quality of the calibration samples. The technique is well established and most of its physical properties are well known.

  • Technical report
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 4946:2016(Main)
Steel and cast iron - Determination of copper content - 2,2'-Diquinolyl spectrophotometric method (ISO 4946:2016)
EN ISO 4946:2016

This International Standard specifies a spectrophotometric method for the determination of copper in
steel and cast iron by 2,2’-biquinoline.
The method is applicable to the determination of copper mass fraction in the range of 0,02 % and 5 %.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17134-2:2023(Main)
Textiles and textile products - Determination of biocide additives - Part 2: Chlorophenol-based preservatives, method using gas chromatography
EN 17134-2:2023

This document specifies a test method for the determination of the content of chlorophenol-based preservative agents in textile materials and articles composed of textile products, by chromatography.

  • Standard
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    42 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 10377:2023(Main)
Guidelines for the preparation of standard routine methods with wavelength-dispersive X-ray fluorescence spectrometry
CEN/TR 10377:2023

X-ray Fluorescence Spectrometry (XRF) has been used for several decades as an important analytical tool for production analysis. XRF is characterised by its speed and high precision over a wide concentration range and since the technique in most cases is used as an relative method the limitations are often connected to the quality of the calibration samples. The technique is well established and most of its physical properties are well known.

  • Technical report
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 23821:2023(Main)
Cosmetics - Analytical methods - Determination of traces of mercury in cosmetics by atomic absorbtion spectrometry (AAS) cold vapour technology after pressure digestion (ISO 23821:2022)
EN ISO 23821:2022

This aim of this standard is to provide a process for the determination of mercury in cosmetics by means of cold vapour atomic adsorption (AAS) after pressure digestion.
The procedure was validated in 2015 by means of a multi laboratory study in combination with cold vapour AAS determination process for mercury with eight laboratories participating. Overall, seven samples representing different matrices (lipstick, tattoo colourant, body lotion, toothpaste, eyeshadow and water make-up) with varying mercury contents between 0,110 mg/kg and 5,84 mg/kg were analysed.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17503:2023(Main)
Soil, sludge, treated biowaste and waste - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC)
EN 17503:2022

This European Standard specifies a method for quantitative determination of 16 polycyclic aromatic hydrocarbons (PAH) (see Table ) in soil, sludge, sediment, treated biowaste, and waste, using GC-MS and HPLC-UV-DAD/FLD covering a wide range of PAH contamination levels (see Table 2).
When using fluorescence detection, acenaphthylene cannot be measured.
Table  —Target analytes of this European Standard
Target analyte   CAS-RNa
Naphthalene   91–20–3
Acenaphthene   83–32–9
Acenaphthylene   208–96–8
Fluorene   86–73–7
Anthracene   120–12–7
Phenanthrene   85–01–8
Fluoranthene   206–44–0
Pyrene   129–00–0
Benz[a]anthracene   56–55–3
Chrysene   218–01–9
Benzo[b]fluoranthene   205–99–2
Benzo[k]fluoranthene   207–08–9
Benzo[a]pyrene   50–32–8
Indeno[1,2,3-cd]pyrene   193–39–5
Dibenz[a,h]anthracene   53–70–3
Benzo[ghi]perylene   191–24–2
a   CAS-RN Chemical Abstracts Service Registry Number.
The limit of detection depends on the determinants, the equipment used, the quality of chemicals used for the extraction of the sample and the clean-up of the extract
Under the conditions specified in this European Standard, lower limit of application from 10 μg/kg (expressed as dry matter) for soils, sludge and biowaste to 100 μg/kg (expressed as dry matter) for solid waste can be achieved. For some specific samples (e.g. bitumen) the limit of 100 μg/kg cannot be reached.
Sludge, waste and treated biowaste may differ in properties as well as in the expected contamination levels of PAH and presence of interfering substances. These differences make it impossible to describe one general procedure. This European Standard contains decision tables based on the properties of the sample and the extraction and clean-up procedure to be used.
The method may be applied to the analysis of other PAH not specified in the scope, provided suitability is proven by proper in-house validation experiments.

  • Standard
    53 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    55 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TS CEN/TS 17847:2023(Main)
Characterization of waste - Determination of selected low boiling point alcohols using gas chromatography with flame ionization detection after static head-space extraction (HS-GC-FID)
CEN/TS 17847:2022

This document specifies a method for quantitative determination of the concentration of selected alcohols with low boiling point in liquid waste and pasty waste by gas chromatography with flame ionization detection after static headspace extraction.
Under the conditions specified in this document, a limit of application of 20 mg/kg, expressed on dry matter for pasty waste and expressed on raw waste for liquid waste, can be achieved.

  • Technical specification
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17681-1:2022(Main)
Textiles and textile products - Organic fluorine - Part 1: Determination of non-volatile compounds by extraction method using liquid chromatography
EN 17681-1:2022

This part of the standard specifies a test method (using liquid chromatography, LC) for detection and quantification of all extractable neutral, ionic, perfluorinated and polyfluorinated non-volatile substances in textile products (for example, in fabrics treated with fluorochemical finishes and in coated fabrics).
Classes of volatile and non volatile compounds (regulated and of concern) in Table 1 include acids, salt acids, esters, amides, telomers, sulfonates, sulfonamides and sulfonamidalcohols.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 17681-2:2022(Main)
Textiles and textile products - Organic fluorine - Part 2: Determination of volatile compounds by extraction method using gas chromatography
EN 17681-2:2022

This part of the standard specifies a test method (using gas chromatography, GC) for detection and
quantification of al l extractable perfluorinated and polyfluorinated v ol at i le substances in textile
products (for example, in fabrics treated with fluoro-chemical finishes and in coated fabrics).
Classes of volatile and non volatile (Part 1 of this Standard) compounds (regulated and of
concern) in Table 1 include acids, salt acids, esters, amides, telomers, sulfonates, sulfonamides and
sulfonamidalcohols.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12916:2019+A1:2022(Main)
Petroleum products - Determination of aromatic hydrocarbon types in middle distillates - High performance liquid chromatography method with refractive index detection
EN 12916:2019+A1:2022

This document specifies a test method for the determination of the content of mono-aromatic, di-aromatic and tri+-aromatic hydrocarbons in diesel fuels, paraffinic diesel fuels and petroleum distillates.
This document defines two procedures, A and B.
Procedure A is applicable to diesel fuels that may contain fatty acid methyl esters (FAME) up to 30 % (V/V) (as in [1], [2] or [3]) and petroleum distillates in the boiling range from 150 °C to 400 °C (as in [4].
Procedure B is applicable to paraffinic diesel fuels with up to 7 % (V/V) FAME. This procedure does not contain a dilution of the sample in order to determine the low levels of aromatic components in these fuels.
The polycyclic aromatic hydrocarbons content is calculated from the sum of di-aromatic and tri+-aromatic hydrocarbons and the total content of aromatic compounds is calculated from the sum of the individual aromatic hydrocarbon types.
Compounds containing sulfur, nitrogen and oxygen can interfere in the determination; mono-alkenes do not interfere, but conjugated di-alkenes and poly-alkenes, if present, can do so.
NOTE 1   For the purpose of this European Standard, the terms "% (m/m)" and "% (V/V)" are used to represent the mass fraction, µ, and the volume fraction, φ, of a material respectively.
NOTE 2   By convention, the aromatic hydrocarbon types are defined on the basis of their elution characteristics from the specified liquid chromatography column relative to model aromatic compounds. Their quantification is performed using an external calibration with a single aromatic compound for each of them, which may or may not be representative of the aromatics present in the sample. Alternative techniques and test methods may classify and quantify individual aromatic hydrocarbon types differently.
NOTE 3   Backflush is part of laboratory-internal maintenance.
WARNING - The use of this standard can involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of users of this standard to take appropriate measures to ensure the safety and health of personnel prior to application of the standard, and fulfil statutory and regulatory requirements for this purpose.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day