SIST EN 14316-2:2007
(Main)Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products
Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products
This European Standard specifies the requirements covering the four product types of expanded perlite products Perlite Aggregate (EPA), Coated Perlite (EPC), Hydrophobic Perlite (EPH) and Premixed Perlite (EPM), containing less than 1 % organic material as defined by annex D of prEN 14316-1:2002 for in-situ insulation of roofs, ceilings, walls and floors.
This Part 2 of the standard is a specification for the installed products.
This Part 2 of this standard contains specifies the checks and test procedures to be used for the declaration made by the installer of the product.
This European Standard does not specify the required level of all properties to be achieved by a product to demonstrate fitness for purpose in a particular application. The required levels are to be found in regulations or non-conflicting standards.
This European Standard does not include factory made insulation products of formed shapes and boards made with expanded perlite or in-situ products intended to be used for the insulation of building equipment and industrial installations.
This European Standard does not specify performance requirements for airborne sound insulation and for acoustic absorption applications.
Wärmedämmstoffe für Gebäude - An der Verwendungsstelle hergestellte Wärmedämmung mit Produkten aus Blähperlit (EP) - Teil 2: Spezifikation für die eingebauten Produkte
Diese Europäische Norm legt Anforderungen an vier Arten von Wärmedämmprodukten aus Blähperlit
(EP-Produkte) fest, die an der Verwendungsstelle zur Wärmedämmung von Dächern, Decken, Wänden und
Fußböden hergestellt werden und entsprechend der Definition in Anhang D von EN 14317-1:2004 weniger als
1 % organische Stoffe enthalten; die vier Blähperlitprodukte sind Perlitkörner (Perlite Aggregate, EPA),
beschichtetes Perlit (Coated Perlite, EPC), wasserabweisendes Perlit (Hydrophobic Perlite, EPH) und
vorgemischtes Perlit (Premixed Perlite,EPM).
Der vorliegende Teil 2 dieser Norm ist eine Spezifikation für die eingebauten Produkte.
Teil 2 dieser Norm legt außerdem die Überprüfungen und Prüfverfahren fest, die für die vom Monteur für das
Produkt abzugebende Erklärung anzuwenden sind.
Diese Europäische Norm legt keine Anforderungsstufen für eine bestimmte Eigenschaft fest, die ein Produkt
erreichen muss, um für einen bestimmten Anwendungszweck gebrauchstauglich zu sein. Die erforderlichen
Stufen sind Vorschriften oder übereinstimmenden Normen zu entnehmen.
Diese Europäische Norm gilt nicht für fabrikmäßig hergestellte, in vorgefertigten Formen oder als Platten
vorliegende Wärmedämmstoffe aus Blähperlit oder für an der Verwendungsstelle hergestellte Produkte, die
für Anwendungen zur Dämmung von haustechnischen und betriebstechnischen Anlagen vorgesehen sind.
In dieser Europäischen Norm werden keine Leistungsanforderungen an die Luftschalldämmung und an die
Schallabsorption festgelegt.
Produits isolants thermiques pour le bâtiment - Isolation thermique formée en place a base de granulats légers de perlite expansée (EP) - Partie 2: Spécification des produits mis en place
La présente Norme européenne spécifie les exigences concernant quatre types de produits à base de perlite expansée : granulats de perlite (EPA), perlite enrobée (EPC), perlite hydrophobe (EPH) et perlite prémélangée (EPM), contenant moins de 1 % de matériaux organiques selon la définition de l’Annexe D de l’EN 14316-1:2004, et destinés à l’isolation en place des toitures, des plafonds, des murs et des planchers.
Le présent document est une spécification applicable aux produits installés.
Le présent document décrit les vérifications et les modes opératoires d’essai à appliquer pour la déclaration faite par l’installateur du produit.
La présente Norme européenne ne spécifie pas le niveau requis de toutes les propriétés qui doivent être satisfaites par un produit pour démontrer son aptitude à l’emploi dans une application particulière. Les niveaux requis peuvent être consignés dans des réglementations ou dans des normes divergentes.
La présente Norme européenne ne couvre pas des produits d’isolation formés fabriqués en usine ni des panneaux à base de perlite expansée ou des produits formés en place, destinés à l’isolation d’équipements de bâtiments et d’installations industrielles.
La présente Norme européenne ne spécifie pas d’exigences de performance pour les applications d’isolement aux bruits aériens et d’absorption acoustique.
Toplotnoizolacijski proizvodi za stavbe - Proizvodi iz ekspandiranega perlita (EP), oblikovani na mestu vgradnje - 2. del: Specifikacija za vgrajene izolacijske proizvode
General Information
- Status
- Published
- Publication Date
- 10-Jun-2007
- Technical Committee
- TOP - Thermal insulation
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 15-May-2007
- Due Date
- 20-Jul-2007
- Completion Date
- 11-Jun-2007
- Directive
- 89/106/EEC - Construction products
Overview
SIST EN 14316-2:2007 is a European Standard developed by CEN that specifies the requirements and test procedures for installed in-situ thermal insulation products formed from expanded perlite (EP). This standard covers four types of expanded perlite insulating products: Perlite Aggregate (EPA), Coated Perlite (EPC), Hydrophobic Perlite (EPH), and Premixed Perlite (EPM), each containing less than 1% organic material. The focus of Part 2 is on specifying the quality and installation verification of these insulation materials once they are applied to building elements such as roofs, ceilings, walls, and floors.
This document forms a crucial part of ensuring building energy performance by verifying that installed insulation meets specified thermal resistance and thickness requirements. SIST EN 14316-2:2007 outlines measurement techniques, installer declarations, and suitability assessments but does not define absolute performance levels, which are given by related regulations or standards.
Key Topics
Scope of Application
- Covers in-situ insulation using expanded perlite products for building thermal insulation applications.
- Excludes factory-made perlite boards and formed shapes or products designed for industrial installations.
- Does not address airborne sound insulation or acoustic absorption properties.
Product Types
- Perlite Aggregate (EPA)
- Coated Perlite (EPC)
- Hydrophobic Perlite (EPH)
- Premixed Perlite (EPM)
Thermal Performance Requirements
- Installed insulation thickness must meet or exceed specified required thickness.
- Declared thermal resistance (RD) is calculated based on installed thickness and declared thermal conductivity (λD).
- Minimum installed thickness values: no individual measurement less than 80% of specified thickness.
Measurement and Verification
- Installer must conduct at least five thickness measurements per 100 m² area using calibrated depth gauges.
- Cavity widths must be measured to ensure full insulation fill before installation.
- Used methods include guides, level marks, and the pin and plate method per EN 823 where disputes arise.
Installer’s Declaration
- Installer provides a formal declaration including:
- Product trade name and designation
- Declared and installed thermal resistance
- Required and installed insulation thickness
- Volume of insulation material used
- Installation date
- Declaration confirms compliance with EN 14316-1 and appropriate installation procedures.
- Installer provides a formal declaration including:
Building and Product Suitability
- Assessment of structural integrity and suitability for loose fill or bonded perlite insulation.
- Consideration of joist systems, attic ventilation, vapor barriers, and service penetrations.
- Product checks to ensure conformity with specified designations.
Applications
SIST EN 14316-2:2007 supports energy-efficient building design by ensuring that in-situ expanded perlite insulation is correctly installed to deliver expected thermal resistance. Applications include:
- Thermal insulation for residential and commercial roofs, ceilings, walls, and floors.
- Retrofitting existing buildings with loose fill or bonded expanded perlite insulation products.
- Compliance verification in construction projects to meet energy performance standards.
- Support for installers and specifiers with a standardized framework for installation quality assurance.
This standard is valuable for architects, engineers, installation contractors, and building inspectors involved in optimizing building thermal performance using environmentally friendly and mineral-based insulation materials.
Related Standards
- EN 14316-1:2004 – Specification for expanded perlite products before installation, providing harmonized product requirements.
- EN 823:1994 – Methods for measuring thickness of thermal insulating products, including pin and plate technique.
- EN ISO 9229:2005 – Definitions relating to thermal insulation terminology.
- EN ISO 6946 – Calculation methods for thermal resistance and transmittance of building elements.
- EN ISO 10456 – Procedures for determining declared and design thermal values of building materials.
By aligning installation practices with SIST EN 14316-2:2007 and these complementary standards, stakeholders can ensure reliable thermal insulation performance and compliance with European building regulations.
Keywords: SIST EN 14316-2:2007, expanded perlite insulation, in-situ thermal insulation, perlite aggregate (EPA), coated perlite (EPC), hydrophobic perlite (EPH), premixed perlite (EPM), thermal resistance, insulation thickness, building insulation standards, European Standard CEN, installer declaration, thermal conductivity, in-situ insulation verification.
Frequently Asked Questions
SIST EN 14316-2:2007 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed products". This standard covers: This European Standard specifies the requirements covering the four product types of expanded perlite products Perlite Aggregate (EPA), Coated Perlite (EPC), Hydrophobic Perlite (EPH) and Premixed Perlite (EPM), containing less than 1 % organic material as defined by annex D of prEN 14316-1:2002 for in-situ insulation of roofs, ceilings, walls and floors. This Part 2 of the standard is a specification for the installed products. This Part 2 of this standard contains specifies the checks and test procedures to be used for the declaration made by the installer of the product. This European Standard does not specify the required level of all properties to be achieved by a product to demonstrate fitness for purpose in a particular application. The required levels are to be found in regulations or non-conflicting standards. This European Standard does not include factory made insulation products of formed shapes and boards made with expanded perlite or in-situ products intended to be used for the insulation of building equipment and industrial installations. This European Standard does not specify performance requirements for airborne sound insulation and for acoustic absorption applications.
This European Standard specifies the requirements covering the four product types of expanded perlite products Perlite Aggregate (EPA), Coated Perlite (EPC), Hydrophobic Perlite (EPH) and Premixed Perlite (EPM), containing less than 1 % organic material as defined by annex D of prEN 14316-1:2002 for in-situ insulation of roofs, ceilings, walls and floors. This Part 2 of the standard is a specification for the installed products. This Part 2 of this standard contains specifies the checks and test procedures to be used for the declaration made by the installer of the product. This European Standard does not specify the required level of all properties to be achieved by a product to demonstrate fitness for purpose in a particular application. The required levels are to be found in regulations or non-conflicting standards. This European Standard does not include factory made insulation products of formed shapes and boards made with expanded perlite or in-situ products intended to be used for the insulation of building equipment and industrial installations. This European Standard does not specify performance requirements for airborne sound insulation and for acoustic absorption applications.
SIST EN 14316-2:2007 is classified under the following ICS (International Classification for Standards) categories: 91.100.60 - Thermal and sound insulating materials. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 14316-2:2007 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/103. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 14316-2:2007 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Thermal insulating products for buildings - In-situ thermal insulation formed from expanded perlite (EP) products - Part 2: Specification for the installed productsToplotnoizolacijski proizvodi za stavbe - Proizvodi iz ekspandiranega perlita (EP), oblikovani na mestu vgradnje - 2. del: Specifikacija za vgrajene izolacijske proizvodeProduits isolants thermiques pour le bâtiment - Isolation thermique formée en place a base de granulats légers de perlite expansée (EP) - Partie 2: Spécification des produits mis en placeWärmedämmstoffe für Gebäude - An der Verwendungsstelle hergestellte Wärmedämmung mit Produkten aus Blähperlit (EP) - Teil 2: Spezifikation für die eingebauten ProdukteTa slovenski standard je istoveten z:EN 14316-2:2007SIST EN 14316-2:2007en;de91.100.60Thermal and sound insulating materialsICS:SLOVENSKI
STANDARDSIST EN 14316-2:200701-julij-2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14316-2January 2007ICS 91.100.60 English VersionThermal insulating products for buildings - In-situ thermalinsulation formed from expanded perlite (EP) products - Part 2:Specification for the installed productsProduits isolants thermiques pour le bâtiment - Isolationthermique formée en place à base de granulats légers dePerlite expansée (EP) - Partie 2: Spécification des produitsmis en placeWärmedämmstoffe für Gebäude - An derVerwendungsstelle hergestellte Wärmedämmung mitProdukten aus Blähperlit (EP) - Teil 2: Spezifikation für dieeingebauten ProdukteThis European Standard was approved by CEN on 2 December 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14316-2:2007: E
Suitability of the building and the insulation product.7 Bibliography.8
1 Scope This European Standard specifies the requirements covering the four product types of expanded perlite products Perlite Aggregate (EPA), Coated Perlite (EPC), Hydrophobic Perlite (EPH) and Premixed Perlite (EPM), containing less than 1 % organic material as defined by Annex D of EN 14316-1:2004 for in-situ insulation of roofs, ceilings, walls and floors. This Part 2 of the standard is a specification for the installed products. This Part 2 of this standard specifies the checks and test procedures to be used for the declaration made by the installer of the product. This European Standard does not specify the required level of all properties to be achieved by a product to demonstrate fitness for purpose in a particular application. The required levels are to be found in regulations or non-conflicting standards. This European Standard does not include factory made insulation products of formed shapes and boards m
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...