SIST EN ISO 3727-2:2002
(Main)Butter - Determination of moisture, non-fat solids and fat contents - Part 2: Determination of non-fat solids content (Reference method) (ISO 3727-2:2001)
Butter - Determination of moisture, non-fat solids and fat contents - Part 2: Determination of non-fat solids content (Reference method) (ISO 3727-2:2001)
TC forecasts updated : delay with the directives ( TC forecasts updating exercise.sj 00-11-09)++
Butter - Bestimmung des Wassergehaltes, der fettfreien Trockenmasse und des Fettgehaltes - Teil 2: Bestimmung der fettfreien Trockenmasse (Referenzverfahren) (ISO 3727-2:2001)
Dieser Teil der Internationalen Norm ISO 3727/IDF 80 legt das Referenzverfahren für die Bestimmung des Gehaltes an fettfreier Trockenmasse von Butter fest.
Beurre - Détermination des teneurs en eau, en matiere seche non grasse et en matiere grasse - Partie 2: Détermination de la teneur en matiere seche non grasse (Méthode de référence) (ISO 3727-2:2001)
La présente partie de l'ISO 3727 / FIL 80 spécifie la méthode de référence pour la détermination de la teneur en matière sèche non grasse du beurre.
Maslo - Določevanje vlage, suhe snovi brez maščobe in maščobe - 2. del: Določevanje suhe snovi brez maščobe (referenčna metoda) (ISO 3727-2:2001)
General Information
- Status
- Published
- Publication Date
- 31-May-2002
- Technical Committee
- KŽP - Agricultural food products
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-Jun-2002
- Due Date
- 01-Jun-2002
- Completion Date
- 01-Jun-2002
Relations
- Effective Date
- 01-Jun-2002
Overview
SIST EN ISO 3727-2:2002 is a European and international standard specifying the reference method for determining the non-fat solids content of butter. Developed jointly by ISO and the International Dairy Federation (IDF), this standard is part two of a three-part series addressing butter composition-specifically moisture, non-fat solids, and fat contents. The accurate measurement of non-fat solids is essential for quality control, nutritional labeling, and compliance with food safety regulations in dairy production.
This standard supersedes EN ISO 3727:1995 and was adopted across CEN member countries, ensuring harmonization in butter analysis methodology throughout Europe and internationally.
Key Topics
- Scope: Defines the reference analytical procedure to quantify the non-fat solids content in butter samples, expressed as a percentage by mass.
- Principle: The method involves evaporating water from a weighed butter sample, extracting fat using a volatile solvent (light petroleum or pentane), and weighing the remaining non-fat solids.
- Terms and Definitions: Non-fat solids content is the mass fraction remaining after moisture and fat removal.
- Required Reagents:
- Light petroleum with boiling range 30°C to 60°C or pentane as a solvent for fat extraction.
- Apparatus:
- Analytical balance with 0.1 mg readability
- Thermostatically controlled drying oven (102°C ± 2°C)
- Desiccator with silica gel or equivalent drying agent
- Porcelain or metal drying dishes, filter crucibles, water/steam bath, glass stirring rods
- Sample Handling and Preparation:
- Sample homogeneity must be preserved without breaking butter emulsion.
- Storage and transport conditions: airtight container, 2°C–14°C until testing.
- Sample warming prior to testing to promote homogenization (up to 35°C).
- Test Procedure:
- Drying butter samples in oven or water bath followed by fat extraction with light petroleum.
- Repeated solvent washing until fat residuals are eliminated.
- Final drying and precise weighing steps to calculate non-fat solids.
- Calculation Formula for non-fat solids content is provided based on mass measurements.
- Precision:
- Repeatability error ≤ 0.15% mass fraction under same-lab conditions.
- Reproducibility error ≤ 0.25% mass fraction across different labs.
- Safety Note: Use of flammable solvents requires compliance with safety regulations related to electrical equipment and solvent handling.
Applications
- Quality Control in Dairy Industry: Ensures butter products meet compositional standards for fat and solids components.
- Nutritional Labeling: Accurate non-fat solids content enables precise nutritional data disclosure on packaging.
- Regulatory Compliance: Supports adherence to legislative requirements for dairy product composition.
- Research & Development: Serves as a baseline method for product formulation and ingredient testing.
- Interlaboratory Standardization: Facilitates reliable comparison of test results across laboratories and countries through established repeatability and reproducibility benchmarks.
Related Standards
- EN ISO 3727-1:2001 – Determination of moisture content in butter (reference method).
- EN ISO 3727-3:2001 – Calculation method for fat content in butter.
- ISO 707 – Sampling methods for milk and dairy products, recommended for use with ISO 3727 series.
- AOAC Official Methods – Complementary methods developed in collaboration with AOAC International relating to milk and dairy product analysis.
By following the standardized procedure detailed in SIST EN ISO 3727-2:2002, laboratories and manufacturers can ensure accurate, consistent, and internationally recognized results for butter's non-fat solids content analysis, which is vital for quality assurance and market acceptance.
Frequently Asked Questions
SIST EN ISO 3727-2:2002 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Butter - Determination of moisture, non-fat solids and fat contents - Part 2: Determination of non-fat solids content (Reference method) (ISO 3727-2:2001)". This standard covers: TC forecasts updated : delay with the directives ( TC forecasts updating exercise.sj 00-11-09)++
TC forecasts updated : delay with the directives ( TC forecasts updating exercise.sj 00-11-09)++
SIST EN ISO 3727-2:2002 is classified under the following ICS (International Classification for Standards) categories: 67.100.20 - Butter. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN ISO 3727-2:2002 has the following relationships with other standards: It is inter standard links to SIST EN ISO 3727:1998. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN ISO 3727-2:2002 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2002
1DGRPHãþD
SIST EN ISO 3727:1998
0DVOR'RORþHYDQMHYODJHVXKHVQRYLEUH]PDãþREHLQPDãþREHGHO
'RORþHYDQMHVXKHVQRYLEUH]PDãþREHUHIHUHQþQDPHWRGD,62
Butter - Determination of moisture, non-fat solids and fat contents - Part 2: Determination
of non-fat solids content (Reference method) (ISO 3727-2:2001)
Butter - Bestimmung des Wassergehaltes, der fettfreien Trockenmasse und des
Fettgehaltes - Teil 2: Bestimmung der fettfreien Trockenmasse (Referenzverfahren) (ISO
3727-2:2001)
Beurre - Détermination des teneurs en eau, en matiere seche non grasse et en matiere
grasse - Partie 2: Détermination de la teneur en matiere seche non grasse (Méthode de
référence) (ISO 3727-2:2001)
Ta slovenski standard je istoveten z: EN ISO 3727-2:2001
ICS:
67.100.20 Maslo Butter
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 3727-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2001
ICS 67.100.20 Supersedes EN ISO 3727:1995
English version
Butter - Determination of moisture, non-fat solids and fat
contents - Part 2: Determination of non-fat solids content
(Reference method) (ISO 3727-2:2001)
Beurre - Détermination des teneurs en eau, en matière Butter - Bestimmung des Wassergehaltes, der fettfreien
sèche non grasse et en matière grasse - Partie 2: Trockenmasse und des Fettgehaltes - Teil 2: Bestimmung
Détermination de la teneur en matière sèche non grasse der fettfreien Trockenmasse (Referenzverfahren) (ISO
(Méthode de référence) (ISO 3727-2:2001) 3727-2:2001)
This European Standard was approved by CEN on 15 December 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 3727-2:2001 E
worldwide for CEN national Members.
CORRECTED 2002-02-06
Foreword
This document (ISO 3727-2:2001) has been prepared by Technical Committee ISO/TC 34
"Agricultural food products" in collaboration with Technical Committee CEN/TC 302 "Milk and
milk products - Methods of sampling and analysis", the secretariat of which is held by NEN.
This document supersedes EN ISO 3727:1995.
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by June 2002, and conflicting national
standards shall be withdrawn at the latest by June 2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United
Kingdom.
Endorsement notice
The text of the International Standard ISO 3727-2:2001 has been approved by CEN as a
European Standard without any modifications.
INTERNATIONAL ISO
STANDARD 3727-2
IDF
80-2
First edition
2001-12-15
Butter — Determination of moisture, non-
fat solids and fat contents —
Part 2:
Determination of non-fat solids content
(Reference method)
Beurre — Détermination des teneurs en eau, en matière sèche non grasse
et en matière grasse —
Partie 2: Détermination de la teneur en matière sèche non grasse
(Méthode de référence)
Reference numbers
ISO 3727-2:2001(E)
IDF 80-2:2001(E)
©
ISO and IDF 2001
ISO 3727-2:2001(E)
IDF 80-2:2001(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe's licensing policy. Neither the ISO Central Secretariat nor the IDF accepts
any liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies and IDF national
committees. In the unlikely event that a problem relating to it is found, please inform the ISO Central Secretariat at the address given below.
© ISO and IDF 2001
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO or IDF at the respective address below.
ISO copyright office International Dairy Federation
Case postale 56 • CH-1211 Geneva 20 41 Square Vergote • B-1030 Brussels
Tel. + 41 22 749 01 11 Tel. + 32 2 733 98 88
Fax + 41 22 749 09 47 Fax + 32 2 733 04 13
E-mail copyright@iso.ch E-mail info@fil-idf.org
Web www.iso.ch Web www.fil-idf.org
Printed in Switzerland
ii © ISO and IDF 2001 – All rights reserved
ISO 3727-2:2001(E)
IDF 80-2:2001(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 3.
The main task of technical committees is to prepare International Standards. Draft International Standards adopted
by the technical committees are circulated to the member bodies for voting. Publication as an International
Standard requires approval by at least 75 % of member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this part of ISO 3727IDF 80 may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights.
International Standard ISO 3727-2IDF 80-2 was prepared by Technical Committee ISO/TC 34, Food products,
Subcommittee SC 5, Milk and milk products, and the International Dairy Federation (IDF), in collaboration with
AOAC International. It is being published jointly by ISO and IDF and separately by AOAC International.
This first edition of ISO 3727-2IDF 80-2, together with ISO 3727-1IDF 80-1 and ISO 3727-3IDF 80-3, cancels
and replaces ISO 3727:1977, which has been technically revised.
ISO 3727IDF 80 consists of the following parts, under the general title Butter — Determination of moisture, non-fat
solids and fat contents:
— Part 1: Determination of moisture content (Reference method)
— Part 2: Determination of non-fat solids content (Reference method)
— Part 3: Calculation of fat content
Annex A of this part of ISO 3727ΩIDF 80 is for information only.
ISO 3727-2:2001(E)
IDF 80-2:2001(E)
Foreword
IDF (the International Dairy Federation) is a worldwide federation of the dairy sector with a National Committee in
every member country. Every National Committee has the right to be represented on the IDF Standing Committees
carrying out the technical work. IDF collaborates with ISO and AOAC International in the development of standard
methods of analysis and sampling for milk and milk products.
Draft International Standards adopted by the Action Teams and Standing Committees are circulated to the National
Committees for voting. Publication as an International Standard requires approval by at least 50 % of National
Committees casting a vote.
International Standard ISO 3727-2IDF 80-2 was prepared by Technical Committee ISO/TC 34, Food products,
Subcommittee SC 5, Milk and milk products, and the International Dairy Federation (IDF), in collaboration with
AOAC International. It is being published jointly by ISO and IDF and separately by AOAC International.
All work was carried out by the Joint ISO/IDF/AOAC Action Team, Water, of the Standing Committee on Main
components of milk, under the aegis of its project leader, Mr G. J. Beutick (NL).
This first edition of ISO 3727-2IDF 80-2, together with ISO 3727-1IDF 80-1 and ISO 3727-3IDF 80-3, cancels
and replaces IDF 80:1977, which has been technically revised.
ISO 3727IDF 80 consists of the following parts, under the general title Butter — Determination of moisture, non-fat
solids and fat contents:
— Part 1: Determination of moisture content (Reference method)
— Part 2: Determination of non-fat solids content (Reference method)
— Part 3: Calculation of fat content
Annex A of this part of ISO 3727ΩIDF 80 is for information only.
iv © ISO and IDF 2001 – All rights reserved
ISO 3727-2:2001(E)
INTERNATIONAL STANDARD
IDF 80-2:2001(E)
Butter — Determination of moisture, non-fat solids and fat
contents —
Part 2:
Determination of non-fat solids content (Reference method)
WARNING — The determination involves the use of volatile flammable
...










Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...