Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 003: Single in-line couplers - Product standard

This standard specifies the required characteristics and performance requirements for single in-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B.
It shall be used together with EN 3567-001.

Luft- und Raumfahrt - Leitungskoppler für die Anwendung in Multiplex-Datenbussystemen nach MIL-STD-1553B - Teil 003: Einfach-Leitungskoppler - Produktnorm

Série aérospatiale - Coupleurs en ligne utilisés dans les systemes multiplexés de bus de données suivant MIL-STD-1553B - Partie 003: Coupleurs en ligne simples - Norme de produit

Cette norme spécifie les caractéristiques requises ainsi que les exigences de tenue des coupleurs en ligne simples utilisés dans les systèmes multiplexés de bus de données suivant MIL-STD-1553B.
Elle doit être utilisée conjointement avec EN 3567-001.

Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 003: Single in-line couplers - Product standard

General Information

Status
Published
Publication Date
30-Apr-2004
ICS
49.060 - Aerospace electric equipment and systems
Technical Committee
I08 - Imaginarni 08
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-May-2004
Due Date
01-May-2004
Completion Date
01-May-2004
Ref Project
EN 3567-003:2001 - Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 003: Single in-line couplers - Product standard

Overview

EN 3567-003:2001 is a CEN product standard in the aerospace series that defines the required characteristics and performance requirements for single in-line couplers used in multiplex data bus systems in accordance with MIL-STD-1553B. It is intended to be used together with EN 3567-001 (technical specification) and provides product-level detail for couplers used in avionics and space applications.

Key topics and technical requirements

  • Scope and composition: Specifies single in-line couplers composed of a coupling transformer, two isolation resistors, a screened environmentally sealed and corrosion-resistant enclosure with outer insulation, and factory-installed cables per EN 3375-003 / EN 3375-004 / EN 3375-005.
  • Environmental and mechanical performance:
    • Operating temperature classes: –65 °C to 150 °C or –65 °C to 200 °C.
    • Salt mist: 500 h; immersion at low air pressure (1.1 kPa, ~30 000 m); fluid resistance per EN 3567-001.
    • Shock: method A, severity 300; vibrations include random level J and gunfire; tensile strength 100 N.
  • Electrical characteristics:
    • Screening continuity (EN 2591-205): specification given at ambient temperature.
    • Insulation resistance: outer jacket ≥ 100 MΩ, between screening and conductors ≥ 100 MΩ.
    • Voltage proof test: 500 V r.m.s. for outer jacket and between screening and conductors.
    • Surface transfer impedance: maximum ZT values are specified by frequency and coupler code (see standard table).
  • Mass and dimensions: Mass is specified as 10 g including sealing sleeves (excluding cable); detailed dimensions and electrical diagram included in the standard.
  • Reliability: Mean Time Between Failures (MTBF) according to MIL‑HDBK‑217.
  • Marking, designation and delivery: Product identification format, temperature class codes and cable-type codes are defined; packaging, storage and quality assurance refer to EN 3567-001.

Applications and who uses this standard

  • Aerospace manufacturers and avionics integrators specifying components for MIL-STD-1553B multiplex data buses.
  • Component suppliers designing or certifying in-line couplers for aircraft and spacecraft harnesses.
  • Systems engineers and procurement specialists who need product-level acceptance criteria, environmental qualification and test requirements.
  • Test laboratories performing electrical, mechanical and environmental qualification tests.
  • Use cases include connecting stubs on MIL-STD-1553B data buses in harsh operational environments where screening, impedance control and mechanical robustness are critical.

Related standards

  • EN 3567-001 (technical specification) - use together with EN 3567-003
  • EN 2591-100, EN 2591-205 (connector test methods)
  • EN 3375-003 / EN 3375-004 / EN 3375-005 (cable product standards)
  • MIL-STD-1553B (data bus specification)
  • MIL-HDBK-217 (reliability prediction)

This standard is essential for anyone specifying, designing or procuring single in-line couplers for MIL-STD-1553B avionics data buses and ensures consistent product performance in demanding aerospace environments.

SIST EN 3567-003:2004 - Page 1 previewSIST EN 3567-003:2004 - Page 2 previewSIST EN 3567-003:2004 - Page 3 previewSIST EN 3567-003:2004 - Page 4 preview
PreviousNext
Standard

SIST EN 3567-003:2004

English language
6 pages
Preview
Preview
e-Library read for
1 day

Frequently Asked Questions

SIST EN 3567-003:2004 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 003: Single in-line couplers - Product standard". This standard covers: This standard specifies the required characteristics and performance requirements for single in-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B. It shall be used together with EN 3567-001.

This standard specifies the required characteristics and performance requirements for single in-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B. It shall be used together with EN 3567-001.

SIST EN 3567-003:2004 is classified under the following ICS (International Classification for Standards) categories: 49.060 - Aerospace electric equipment and systems. The ICS classification helps identify the subject area and facilitates finding related standards.

SIST EN 3567-003:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 003: Single in-line couplers - Product standardLuft- und Raumfahrt - Leitungskoppler für die Anwendung in Multiplex-Datenbussystemennach MIL-STD-1553B - Teil 003: Einfach-Leitungskoppler - ProduktnormSérie aérospatiale - Coupleurs en ligne utilisés dans les systemes multiplexés de bus de données suivant MIL-STD-1553B - Partie 003: Coupleurs en ligne simples - Norme de produitAerospace series - In-line couplers for use in multiplex data bus systems in accordance with MIL-STD-1553B - Part 003: Single in-line couplers - Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3567-003:2001SIST EN 3567-003:2004en01-maj-2004SIST EN 3567-003:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3567-003November 2001ICS 49.060English versionAerospace series - In-line couplers for use in multiplex data bussystems in accordance with MIL-STD-1553B - Part 003: Singlein-line couplers - Product standardSérie aérospatiale - Coupleurs en ligne utilisés dans lessystèmes multiplexés de bus de données suivant MIL-STD-1553B - Partie 003: Coupleurs en ligne simples - Norme deproduitLuft- und Raumfahrt - Leitungskoppler für die Anwendungin Multiplex-Datenbussystemen nach MIL-STD-1553B - Teil003: Einfach-Leitungskoppler - ProduktnormThis European Standard was approved by CEN on 4 June 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3567-003:2001 ESIST EN 3567-003:2004
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...