Abstract

This document specifies a method for the determination of the chloride content in ammonium nitrate fertilizers of high nitrogen content.
This document is applicable to the fertilizing products blends where a blend is a mix of at least two of the following components: fertilizers, liming materials, soil improvers, growing media, inhibitors, plant biostimulants, and where the following category: inorganic fertilizers is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If inorganic fertilizer is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a fertilizing product blend is composed of components in equal quantity, the user decides which standard to apply. Variations in analytical methods for fertilizing product blends can lead to differing results as some components or matrix interactions can affect the outcome. Validation procedures have shown that developed standard methods are robust and reliable across diverse product compositions, but possible interferences and unexpected results when analysing fertilizing product blends are possible.

Status
Not Published
Public Enquiry End Date
01-May-2026
Technical Committee
KAT - Soil quality
Current Stage
4020 - Public enquire (PE) (Adopted Project)
Start Date
24-Feb-2026
Due Date
14-Jul-2026
Completion Date
29-May-2026

Buy Documents

Draft

oSIST prEN 17761:2026

English language (12 pages)
Preview
Preview
e-Library read for
×1 day

oSIST prEN 17761:2026 is a CEN draft European Standard for determining the chloride content in ammonium nitrate fertilizers of high nitrogen content. It sets out a potentiometric titration method using silver nitrate in an acidic medium, and it also applies to certain fertilizing product blends when inorganic fertilizers are the highest component by mass, volume, or dry mass for liquids. It is intended for laboratories, fertilizer producers, and quality-control staff who need a common result reported as chlorine (Cl) content.

What does oSIST prEN 17761:2026 specify?

oSIST prEN 17761:2026 specifies a laboratory method for chloride determination and the conditions for using it on the stated fertilizer products. For blends, the standard applies only when inorganic fertilizers are the highest share; if another component group is highest, the European Standard for that group applies, and if the shares are equal the user chooses the standard.

The document is organized into clauses on scope, references, terms, principle, reagents, apparatus, sampling and sample preparation, procedure, calculation, precision, and test report.

AnnexWhat it covers
Annex AResults of the inter-laboratory study and the statistical basis for precision data

What are the key requirements of oSIST prEN 17761:2026?

  • Clause 4 uses potentiometric titration with silver nitrate in an acidic medium. In practice, the endpoint is found from the electrode signal, not from an indicator color change.

  • Clauses 5 and 6 specify analytical-grade reagents, chloride-free water, silver nitrate and potassium chloride solutions, and the required instruments, including a potentiometer with silver and calomel electrodes, a stirrer, and a microburette. This fixes the measuring setup so different laboratories can compare results.

  • Clause 7 says sampling is outside the method and sample preparation follows EN 1482-2. The sample must represent the product being tested, because segregation or damage can change the chloride result.

  • Clause 8.1 to 8.3 require standardization of the silver nitrate solution against potassium chloride, a blank test, and a check that the apparatus and procedure are working correctly. This is what ties the titrant strength to a known reference and corrects for reagent background.

  • Clause 8.4 gives the sample determination step: weigh 10 g to 20 g, dissolve the test portion in water, nitric acid, and acetone, then titrate with the silver nitrate working solution in small additions. The note allows automated titration if it gives equivalent results.

  • Clauses 9 and 10 require the result to be calculated as chlorine percentage in the fertilizer as received for analysis, using the blank-corrected equivalence volume and the silver nitrate concentration. Precision is stated through repeatability and reproducibility, and low-level results near the LoQ should be checked carefully, including by spiking when needed.

  • Clause 11 defines the minimum test-report content: sample identification, the method reference, the result, sampling dates if known, analysis date, and any optional details or incidents that could have influenced the outcome. This is the information needed for traceability and later review.

What terms does oSIST prEN 17761:2026 define?

  • Potentiometric titration - A titration in which the endpoint is found from the change in electrode potential.

  • Blank test - A test on the reagents that is used to correct the final result.

  • Check test - The blank test also serves to confirm that the apparatus and procedure are functioning properly.

  • Repeatability - The closeness of two results obtained in the same laboratory under the same conditions.

  • Reproducibility - The closeness of results obtained in different laboratories under different conditions.

  • Limit of quantification (LoQ) - The low-concentration region where the document advises checking result reliability, especially by spiking.

Who uses oSIST prEN 17761:2026?

oSIST prEN 17761:2026 is used by laboratories that test ammonium nitrate fertilizers of high nitrogen content and by labs that analyze fertilizing product blends. It is also relevant to fertilizer manufacturers, quality managers, and buyers who need a repeatable chloride result for product control, specification checks, or dispute work.

What changed in oSIST prEN 17761:2026 from the previous edition?

oSIST prEN 17761:2026 will supersede CEN/TS 17761:2022. The stated technical changes are:

  • the CEN Technical Specification was adopted as a European Standard
  • the scope was updated
  • the normative references were updated
  • sampling and sample preparation were updated
  • higher concentrated silver nitrate solution was added
  • automated titration was added as an alternative
  • Clause 10 on precision and Annex A were added
  • the bibliography was updated

Which standards are used with oSIST prEN 17761:2026?

DocumentWhat it contributes
EN 1482-2Required sample preparation provisions
prEN 12944-1General terms for fertilizers, liming materials, and inhibitors
prEN 12944-2Fertilizer-specific terms and definitions
EN 1482-1Recommended sampling method cited in the sampling note
ISO 5725-1General principles and definitions for repeatability and reproducibility
ISO 5725-2Basic method for determining repeatability and reproducibility

What does the oSIST prEN 17761:2026 document contain?

oSIST prEN 17761:2026 contains a full step-by-step analytical procedure, including standardization of the silver nitrate solution, blank testing, and sample titration. It also contains the calculation formula for chlorine content and a worked example showing how the equivalence volume is identified from potential increments.

Clause 10 presents precision data, and Table 2 gives repeatability and reproducibility limits. Annex A reports the inter-laboratory study behind those figures, including the statistical treatment of the results.

Relations

Effective Date
01-Apr-2026

Buy Documents

Draft

oSIST prEN 17761:2026

English language (12 pages)
Preview
Preview
e-Library read for
×1 day

Get Certified

Connect with accredited certification bodies for this standard

Control Union Certifications

Global certification for agriculture and sustainability.

RVA Netherlands Verified

ECOCERT

Organic and sustainability certification.

COFRAC France Verified

FSC International

Forest Stewardship Council certification.

ASI Germany Verified

Sponsored listings

Frequently Asked Questions

oSIST prEN 17761:2026 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Inorganic fertilizers - Determination of the chloride content in ammonium nitrate fertilizers of high nitrogen content". This standard covers: This document specifies a method for the determination of the chloride content in ammonium nitrate fertilizers of high nitrogen content. This document is applicable to the fertilizing products blends where a blend is a mix of at least two of the following components: fertilizers, liming materials, soil improvers, growing media, inhibitors, plant biostimulants, and where the following category: inorganic fertilizers is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If inorganic fertilizer is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a fertilizing product blend is composed of components in equal quantity, the user decides which standard to apply. Variations in analytical methods for fertilizing product blends can lead to differing results as some components or matrix interactions can affect the outcome. Validation procedures have shown that developed standard methods are robust and reliable across diverse product compositions, but possible interferences and unexpected results when analysing fertilizing product blends are possible.

This document specifies a method for the determination of the chloride content in ammonium nitrate fertilizers of high nitrogen content. This document is applicable to the fertilizing products blends where a blend is a mix of at least two of the following components: fertilizers, liming materials, soil improvers, growing media, inhibitors, plant biostimulants, and where the following category: inorganic fertilizers is the highest % in the blend by mass or volume, or in the case of liquid form by dry mass. If inorganic fertilizer is not the highest % in the blend, the European Standard for the highest % of the blend applies. In case a fertilizing product blend is composed of components in equal quantity, the user decides which standard to apply. Variations in analytical methods for fertilizing product blends can lead to differing results as some components or matrix interactions can affect the outcome. Validation procedures have shown that developed standard methods are robust and reliable across diverse product compositions, but possible interferences and unexpected results when analysing fertilizing product blends are possible.

oSIST prEN 17761:2026 is classified under the following ICS (International Classification for Standards) categories: 65.080 - Fertilizers. The ICS classification helps identify the subject area and facilitates finding related standards.

oSIST prEN 17761:2026 has the following relationships with other standards: It is inter standard links to SIST-TS CEN/TS 17761:2023. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

oSIST prEN 17761:2026 is associated with the following European legislation: EU Directives/Regulations: 2019/1009; Standardization Mandates: M/564, M/564 AMD 1, M/564 AMD 2. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.

oSIST prEN 17761:2026 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2026
Anorganska gnojila - Določanje klorida v gnojilih iz amonijevega nitrata z veliko
vsebnostjo dušika
Inorganic fertilizers - Determination of the chloride content in ammonium nitrate fertilizers
of high nitrogen content
Anorganische Düngemittel - Bestimmung des Chloridgehaltes in
Ammoniumnitratdüngemitteln mit hohem Stickstoffgehalt
Engrais inorganiques - Détermination de la teneur en chlorure des engrais à base de
nitrate d'ammonium à forte teneur en azote
Ta slovenski standard je istoveten z: prEN 17761
ICS:
65.080 Gnojila Fertilizers
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
prEN 17761
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2026
ICS 65.080 Will supersede CEN/TS 17761:2022
English Version
Inorganic fertilizers - Determination of the chloride
content in ammonium nitrate fertilizers of high nitrogen
content
Engrais inorganiques - Détermination de la teneur en Anorganische Düngemittel - Bestimmung des
chlorure des engrais à base de nitrate d'ammonium à Chloridgehaltes in Ammoniumnitratdüngemitteln mit
forte teneur en azote hohem Stickstoffgehalt
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 260.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2026 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 17761:2026 E
worldwide for CEN national Members.

prEN 17761:2026 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Principle . 4
5 Reagents . 4
6 Apparatus and equipment . 5
7 Sampling and sample preparation . 5
7.1 Sampling . 5
7.2 Sample Preparation . 5
8 Procedure . 6
8.1 Standardization of the silver nitrate solution . 6
8.2 Blank test . 6
8.3 Check test . 7
8.4 Determination . 7
9 Calculation and expression of the result . 7
10 Precision . 8
10.1 Inter-laboratory study . 8
10.2 Repeatability . 8
10.3 Reproducibility . 8
11 Test report . 9
Annex A (informative) Results of the inter-laboratory study . 10
A.1 Inter-laboratory study . 10
A.2 Statistical results . 10
Bibliography . 12

prEN 17761:2026 (E)
European foreword
This document (prEN 17761:2026) has been prepared by Technical Committee CEN/TC 260 “Fertilizers
and liming materials”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document will supersede CEN/TS 17761:2022.
prEN 17761:2026 includes the following significant technical changes with respect to
CEN/TS 17761:2022:
a) the CEN Technical Specification has been adopted as a European Standard;
b) update of Scope (Clause 1);
c) update of Normative references (Clause 2);
d) Sampling and sample preparation (Clause 7) has been updated;
e) the use of higher concentrated silver nitrate solution has been included;
f) the use of automated titration has been added as alternative;
g) Clause 10 (Precision) and Annex A including results of inter-laboratory study added;
h) update of Bibliography.
This document has been prepared under a standardization request addressed to CEN by the European
Commission. The Standing Committee of the EFTA States subsequently approves these requests for its
Member States.
prEN 17761:2026 (E)
1 Scope
This document specifies a method for the determination of the chloride content in ammonium nitrate
fertilizers of high nitrogen content.
This document is applicable to the fertilizing products blends where a blend is a mix of at least two of the
following components: fertilizers, liming materials, soil improvers, growing media, inhibitors, plant
biostimulants, and where the following category: inorganic fertilizers is the highest % in the blend by
mass or volume, or in the case of liquid form by dry mass. If inorganic fertilizer is not the highest % in the
blend, the European Standard for the highest % of the blend applies. In case a fertilizing product blend is
composed of components in equal quantity, the user decides which standard to apply. Variations in
analytical methods for fertilizing product blends can lead to differing results as some components or
matrix interactions can affect the outcome. Validation procedures have shown that developed standard
methods are robust and reliable across diverse product compositions, but possible interferences and
unexpected results when analysing fertilizing product blends are possible.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 1482-2, Fertilizers, liming materials and inhibitors — Sampling and sample preparation — Part 2:
General sample preparation provisions
prEN 12944-1, Fertilizers, liming materials and inhibitors — Vocabulary — Part 1: General terms
prEN 12944-2, Fertilizers, liming materials and inhibitors — Vocabulary — Part 2: Terms relating to
fertilizers
3 Terms and definitions
For the purposes of this document, the terms and definitions given in prEN 12944-1 and prEN 12944-2
apply.
ISO and IEC maintain terminology databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https://www.iso.org/obp
— IEC Electropedia: available at https://www.electropedia.org/
4 Principle
Chloride ions dissolved in water are determined by potentiometric titration with silver nitrate in an acidic
medium.
5 Reagents
Use only reagents of recognized analytical grade, unless otherwise specified.
5.1 Distilled or demineralized water, free from chloride ions.
5.2 Acetone, analytical grade.
5.3 Concentrated nitric acid, density ρ = 1,40 g/ml, at 20 °C.
prEN 17761:2026 (E)
5.4 Silver nitrate stock solution, substance concentration c = 0,100 mol/l.
Store this solution in a brown glass bottle. A commercially available standard solution of at least
0,100 mol/l may be used.
5.5 Silver nitrate solution, c = 0,004 mol/l.
Prepare this solution at the time of use.
5.6 Potassium chloride (KCl), analytical grade.
5.7 Potassium chloride (KCl) stock solution, c = 0,100 mol/l.
Weigh, to the nearest 0,1 mg, 3,727 6 g of potassium chloride (5.6), previously dried for one hour in an
oven (6.2) at 130 °C and cooled in a desiccator (6.3) to ambient temperature. Add sufficient water (5.1)
in order to dissolve the potassium chloride. Transfer the solution
...