SIST EN IEC 63246-3:2022

SLOVENSKI STANDARD
01-maj-2022
Nastavljiva avtomobilska informacijska vzdrževalna storitev (CCIS) - 3. del: Okvir
(IEC 63246-3:2022)
Configurable car infotainment services (CCIS) - Part 3: Framework (IEC 63246-3:2022)
Multimedia-Systeme und -Ausstattung für Fahrzeuge - Konfigurierbare Fahrzeug-
Infotainment-Dienste (CCIS) - Teil 3: Rahmenwerk (IEC 63246-3:2022)
Services d'infodivertissements configurables pour les véhicules (CCIS) - Partie 3 : Cadre
(IEC 63246-3:2022)
Ta slovenski standard je istoveten z: EN IEC 63246-3:2022
ICS:
43.040.15 Avtomobilska informatika. Car informatics. On board
Vgrajeni računalniški sistemi computer systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 63246-3

NORME EUROPÉENNE
EUROPÄISCHE NORM February 2022
ICS 33.160.99; 43.040.15
English Version
Configurable car infotainment services (CCIS) - Part 3:
Framework
(IEC 63246-3:2022)
Services d'infodivertissements configurables pour les Multimedia-Systeme und -Ausstattung für Fahrzeuge -
véhicules (CCIS) - Partie 3 : Cadre Konfigurierbare Fahrzeug-Infotainment-Dienste (CCIS) -
(IEC 63246-3:2022) Teil 3: Rahmenwerk
(IEC 63246-3:2022)
This European Standard was approved by CENELEC on 2022-02-18. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 63246-3:2022 E

European foreword
The text of document 100/3509/CDV, future edition 1 of IEC 63246-3, prepared by IEC/TC 100 "Audio,
video and multimedia systems and equipment" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN IEC 63246-3:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-11-18
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-02-18
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 63246-3:2022 was approved by CENELEC as a European
Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 63246-1 - Configurable car infotainment services EN IEC 63246-1 -
(CCIS) - Part 1: General
IEC 63246-3 ®
Edition 1.0 2022-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Configurable car infotainment services (CCIS) –

Part 3: Framework
Services d'infodivertissements configurables pour les véhicules (CCIS) –

Partie 3: Cadre
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.160.99; 43.040.15 ISBN 978-2-8322-1068-7

– 2 – IEC 63246-3:2022 © IEC 2022
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Reference functional architecture . 7
4.1 CCIS functions . 7
4.1.1 General . 7
4.1.2 Registration . 8
4.1.3 Authentication management. 8
4.1.4 Device control. 8
4.1.5 Device monitoring . 8
4.1.6 Profile management . 8
4.1.7 Content delivery . 8
4.2 Functional interworking model . 9
4.3 Service level configuration . 9
5 Information flows for functional operations . 10
5.1 Owner initialization . 10
5.2 Client registration. 10
5.2.1 General . 10
5.2.2 Private client registration . 11
5.2.3 Public client certification . 11
5.3 Device registration . 12
5.4 Device monitoring . 12
5.5 Device control . 13
5.5.1 Device control by owners . 13
5.5.2 Device control by clients . 13
5.6 Content delivery . 14
5.6.1 General . 14
5.6.2 Content delivery by owners . 14
5.6.3 Content delivery by clients . 14
6 Security considerations . 15
Bibliography . 17

Figure 1 – CCIS functional blocks . 8
Figure 2 – Interworking of CCIS functions . 9
Figure 3 – Registration of CCIS owners . 10
Figure 4 – Registration of private client . 11
Figure 5 – Certification of public client . 12
Figure 6 – Registration of CCIS devices . 12
Figure 7 – Device monitoring . 13
Figure 8 – Device control by CCIS owner . 13

IEC 63246-3:2022 © IEC 2022 – 3 –
Figure 9 – Device control by CCIS client . 14
Figure 10 – Content delivery by CCIS owner . 14
Figure 11 – Content delivery by CCIS client . 15
Figure 12 – Secure communication using public-private and secret keys . 16

Table 1 – CCIS service level configuration . 10

– 4 – IEC 63246-3:2022 © IEC 2022
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
CONFIGURABLE CAR INFOTAINMENT SERVICES (CCIS) –

Part 3: Framework
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 63246-3 has been prepared by technical area 17: Multimedia systems and equipment for
vehicles, of IEC technical committee 100: Audio, video and multimedia systems and equipment.
It is an International Standard.
The text of this International Standard is based on the following documents:
Draft Report on voting
100/3509/CDV 100/3628/RVC
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
A list of all parts in the IEC 63246 series, published under the general title Configurable car
infotainment services (CCIS), can be found on the IEC website.

IEC 63246-3:2022 © IEC 2022 – 5 –
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
– 6 – IEC 63246-3:2022 © IEC 2022
INTRODUCTION
The market for car infotainment services (also known as "in-vehicle infotainment systems") has
been growing rapidly, as reflected by the growth of the associated industries. It is expected that
a variety of car infotainment (or multimedia) devices and services will be developed in the future.
Such devices include navigation, cameras, speakers, headrest displays, air-conditioners,
thermometers, heated seats, and lights. It is also expected that some devices will be developed
to provide 4-dimensional experiences for users.
Car infotainment systems typically include A/V features (such as standard radio and CD players),
and two-way communications tools, as well as hands-free phone connections, vehicle voice
commands, and other types of interactive audios or videos. Car infotainment systems have
evolved to allow passengers to watch movies and other visual media (for example, DVD players
installed on the rear seats). Another distinctive feature of future car infotainment systems is
mobile device connectivity. Newer vehicles will provide a wide range of systems that allow
devices (e.g. smartphones and laptops) to be connected to a variety of services embedded in
the vehicle.
From this observation, there is a crucial need for standardization to provide car infotainment
users with more enhanced services so as to easily manage and control infotainment devices as
well as content within a car.
The purpose of the IEC 63246 series is to specify the general considerations, requirements,
framework, and protocols to provide car users with the functionality of managing and controlling
device and content resources within a car.
The IEC 63246 series consists of the following parts:
– Part 1: General;
– Part 2: Requirements;
– Part 3:
...