iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 10269:2000/A1:2006/AC:2006

(Amendment)

Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties

Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties

TC - Modification to Table 1

Stähle und Nickellegierungen für Befestigungselemente für den Einsatz bei erhöhten und/oder tiefen Temperaturen

Aciers et alliages de nickel pour éléments de fixation utilisés a température élevée et/ou basse température

Jekla in nikljeve zlitine za pritrdilne elemente za delo pri povišanih in/ali nizkih temperaturah

General Information

Status
Withdrawn
Publication Date
31-Aug-2006
Withdrawal Date
06-May-2014
ICS
77.120.40 - Nickel, chromium and their alloys
77.140.20 - Stainless steels
Technical Committee
IFEK - Ferrous metals
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
07-May-2014
Due Date
30-May-2014
Completion Date
07-May-2014
Directive
97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
Mandate
M/071 - Mandate to CEN for standardization in the field of Pressure equipment
Ref Project
EN 10269:1999/A1:2006/AC:2006 - Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties

Relations

Replaced By
SIST EN 10269:2000/A1:2006/AC:2009 - Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
Effective Date
22-Dec-2008
Corrects
SIST EN 10269:2000/A1:2006 - Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
Effective Date
22-Dec-2008

Buy Standard

EN 10269:2000/A1:2006/AC:2006EN 10269:2000/A1:2006/AC:2006
PreviousNext
Corrigendum
EN 10269:2000/A1:2006/AC:2006
English, French and German language
2 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Steels and nickel alloys for fasteners with specified elevated and/or low temperature propertiesJekla in nikljeve zlitine za pritrdilne elemente za delo pri povišanih in/ali nizkih temperaturahAciers et alliages de nickel pour éléments de fixation utilisés a température élevée et/ou basse températureStähle und Nickellegierungen für Befestigungselemente für den Einsatz bei erhöhten und/oder tiefen TemperaturenTa slovenski standard je istoveten z:EN 10269:1999/A1:2006/AC:2006SIST EN 10269:2000/A1:2006/AC:2006en,fr,de77.140.2077.120.40ICS:SLOVENSKI
STANDARDSIST EN 10269:2000/A1:2006/AC:200601-september-2006







EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 10269:1999/A1:2006/ACJuly 2006Juillet 2006Juli 2006ICS 77.120.40; 77.140.20English versionVersion FrançaiseDeutsche FassungSteels and nickel alloys for fasteners with specified elevated and/or lowtemperature propertiesAciers et alliages de nickel pour élémentsde fixation utilisés à température élevéeet/ou basse températureStähle und Nickellegierungen fürBefestigungselemente für den Einsatz beierhöhten und/oder tiefen TemperaturenThis corrigendum becomes effective on 12 July 2006 for incorporation in the three official languageversions of the EN.Ce corrigendum prendr
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 10269:2014(Main)
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
EN 10269:2013

This European Standard specifies requirements for semi-finished products, bars and rods for fasteners with properties specified at elevated and/or low temperatures made of non-alloy and alloy (including stainless) steels and nickel alloys as given in Table 1. The requirements of this standard may be applied also to the finished fasteners. The general technical delivery conditions in EN 10021 also apply to products supplied in accordance with this European Standard.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10095:2000/AC:2002(Amendment)
Heat resisting steels and nickel alloys
EN 10095:1999/AC:2001

TC - Table 2, one value for an upper limit different from E and F

  • Corrigendum
    2 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10095:2000(Main)
Heat resisting steels and nickel alloys
EN 10095:1999

1.1 This European standard covers the grades of wrought steels and nickel alloys listed in tables 1 to 3 which are usually employed for products, for which the main requirement is their resistance to the effects of hot gases and products of combustion at temperatures above 550° C. 1.2 This EN 10095 specifies the technical delivery conditions for semi-finished products, for hot or cold rolled sheet/plate and strip, hot or cold formed bars, rods and sections of heat resisting steels and nickel alloys.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3506-6:2022(Main)
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 6: General rules for the selection of stainless steels and nickel alloys for fasteners (ISO 3506-6:2020)
EN ISO 3506-6:2022

This document specifies general rules and provides technical information on stainless steels and their properties, which are relevant when using other parts of the ISO 3506 series. It includes specifications for corrosion-resistant stainless steels and nickel alloys, which are suitable for the manufacture of fasteners.
It applies to austenitic, martensitic, ferritic and duplex (austenitic-ferritic) stainless steel grades and nickel alloys for fasteners, and is intended to be used together with the relevant parts of the ISO 3506 series.
Common designations of stainless steels and nickel alloys used for fasteners are given in Annex A.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10269:2014(Main)
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
EN 10269:2013

This European Standard specifies requirements for semi-finished products, bars and rods for fasteners with properties specified at elevated and/or low temperatures made of non-alloy and alloy (including stainless) steels and nickel alloys as given in Table 1. The requirements of this standard may be applied also to the finished fasteners. The general technical delivery conditions in EN 10021 also apply to products supplied in accordance with this European Standard.

  • Standard
    49 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10095:2000/AC:2002(Amendment)
Heat resisting steels and nickel alloys
EN 10095:1999/AC:2001

TC - Table 2, one value for an upper limit different from E and F

  • Corrigendum
    2 pages
    English, French and German language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 10095:2000(Main)
Heat resisting steels and nickel alloys
EN 10095:1999

1.1 This European standard covers the grades of wrought steels and nickel alloys listed in tables 1 to 3 which are usually employed for products, for which the main requirement is their resistance to the effects of hot gases and products of combustion at temperatures above 550° C. 1.2 This EN 10095 specifies the technical delivery conditions for semi-finished products, for hot or cold rolled sheet/plate and strip, hot or cold formed bars, rods and sections of heat resisting steels and nickel alloys.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST-TP CEN/TR 12349:2023(Main)
Mechanical vibration - Guide to the health effects of vibration on the human body
CEN/TR 12349:2023

The aim of this CEN report is to provide information on the possible adverse health effects caused by exposure to vibration at work.  the report addresses manufacturers as well as employers and employees using vibrating machinery in order to improve their understanding of the possible health problems arising from occupational exposure to vibration.

  • Technical report
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 80004-1:2023(Main)
Nanotechnologies - Vocabulary - Part 1: Core vocabulary (ISO 80004-1:2023)
EN ISO 80004-1:2023

This document defines core terms in the field of nanotechnology. This document is intended to facilitate communication between organizations and individuals in industry and those who interact with them.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN ISO 3262-22:2023(Main)
Extenders - Specifications and methods of test - Part 22: Flux-calcined kieselguhr (ISO 3262-22:2023)
EN ISO 3262-22:2023

This document specifies requirements and corresponding methods of test for flux-calcined kieselguhr.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day