SIST EN ISO 17827-1:2016
(Main)Solid Biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO 17827-1:2016)
Solid Biofuels - Determination of particle size distribution for uncompressed fuels - Part 1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO 17827-1:2016)
This international standard describes method for determination of the the size distribution of particulate biofuels by the
horizontally oscillating screen method. It applies to particulate uncompressed fuels with a nominal top size of 1 mm and
above such as wood chips, hog fuel, olive stones etc. A sample is subjected to sieving through horizontally oscillating
sieves, sorting the particles in decreasing size classes by mechanical means.The sieving operation shall be horizontally
oscillating (one or two dimensional), using an appropriate stroke-frequency according to the type of material. The number of
sieves and the aperture sizes of the sieves shall be chosen according to the size specification of the actual sample material.
Biogene Festbrennstoffe - Bestimmung der Partikelgrößenverteilung für unkomprimierte Brennstoffe - Teil 1: Horizontales Rüttelsiebverfahren (ISO 17827-1:2016)
Biocombustibles solides - Détermination de la distribution granulométrique des combustibles non comprimés - Partie 1: Méthode au tamis oscillant d'ouverture de maille égale ou supérieure à 3,15 mm (ISO 17827-1:2016)
ISO 17827-1:2016 spécifie une méthode pour la détermination de la distribution granulométrique de biocombustibles particulaires au tamis oscillant dans le plan horizontal. Elle s'applique aux combustibles particulaires non comprimés de dimension supérieure nominale égale ou supérieure à 3,15 mm, tels que les copeaux, les bûchettes, les noyaux d'olive, etc. La méthode a pour but de caractériser les matériaux jusqu'à une classe granulométrique de P63. Pour les classes en P supérieures, la caractérisation se fait essentiellement par tri manuel.
Trdna biogoriva - Določevanje porazdelitve velikosti delcev za nestisnjena goriva - 1. del: Metoda z nihajočim sitom z odprtinami 3,15 mm ali več (ISO 17827-1:2016)
Ta mednarodni standard opisuje metodo za določevanje porazdelitve velikosti delcev biogoriv z metodo z vodoravno nihajočim sitom. Uporablja se za nestisnjena goriva z nazivno zrnatostjo vsaj 1 mm, kot so lesni sekanci, drobljenci, olivne koščice itd. Vzorec se preseje skozi vodoravno nihajoča sita, ki mehansko razvrstijo delce po velikosti od največjih do najmanjših. Sejanje mora potekati z vodoravno nihajočim premikanjem (eno- ali dvodimenzionalno) in uporabo ustrezne frekvence sunkov v skladu z vrsto materiala. Število sit in velikosti njihovih odprtin je treba izbrati v skladu s specifikacijo velikosti dejanskega vzorčnega materiala.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 17827-1:2016
01-junij-2016
1DGRPHãþD
SIST EN 15149-1:2011
7UGQDELRJRULYD'RORþHYDQMHSRUD]GHOLWYHYHOLNRVWLGHOFHY]DQHVWLVQMHQDJRULYD
GHO 0HWRGD]QLKDMRþLPVLWRP]RGSUWLQDPLPPDOLYHþ ,62
Solid Biofuels - Determination of particle size distribution for uncompressed fuels - Part
1: Oscillating screen method using sieves with apertures of 3,15 mm and above (ISO
17827-1:2016)
Biogene Festbrennstoffe - Bestimmung der Partikelgrößenverteilung für unkomprimierte
Brennstoffe - Teil 1: Horizontales Rüttelsiebverfahren (ISO 17827-1:2016)
Biocombustibles solides - Détermination de la distribution granulométrique des
combustibles non comprimés - Partie 1: Méthode au tamis oscillant d'ouverture de maille
égale ou supérieure à 3,15 mm (ISO 17827-1:2016)
Ta slovenski standard je istoveten z: EN ISO 17827-1:2016
ICS:
75.160.40 Biogoriva Biofuels
SIST EN ISO 17827-1:2016 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 17827-1:2016
---------------------- Page: 2 ----------------------
SIST EN ISO 17827-1:2016
EN ISO 17827-1
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2016
EUROPÄISCHE NORM
ICS 75.160.10; 27.190 Supersedes EN 15149-1:2010
English Version
Solid biofuels - Determination of particle size distribution
for uncompressed fuels - Part 1: Oscillating screen method
using sieves with apertures of 3,15 mm and above (ISO
17827-1:2016)
Biocombustibles solides - Détermination de la Biogene Festbrennstoffe - Bestimmung der
distribution granulométrique des combustibles non Partikelgrößenverteilung für unkomprimierte
comprimés - Partie 1: Méthode au tamis oscillant Brennstoffe - Teil 1: Horizontales Rüttelsiebverfahren
d'ouverture de maille égale ou supérieure à 3,15 mm mit Sieben mit einer Lochgröße von 3,15 mm und
(ISO 17827-1:2016) darüber (ISO 17827-1:2016)
This European Standard was approved by CEN on 20 February 2016.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17827-1:2016 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 17827-1:2016
EN ISO 17827-1:2016 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 17827-1:2016
EN ISO 17827-1:2016 (E)
European foreword
This document (EN ISO 17827-1:2016) has been prepared by Technical Committee ISO/TC 238 "Solid
biofuels" in collaboration with Technical Committee CEN/TC 335 “Solid biofuels” the secretariat of
which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by October 2016, and conflicting national standards shall
be withdrawn at the latest by October 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
This document supersedes EN 15149-1:2010.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ir
...
SLOVENSKI STANDARD
oSIST prEN ISO 17827-1:2015
01-april-2015
7UGQDELRJRULYD'RORþHYDQMHSRUD]GHOLWYHYHOLNRVWLGHOFHY]DQHVWLVQMHQDJRULYD
GHO 0HWRGD]QLKDMRþLPVLWRP]RGSUWLQDPLPPDOLYHþ ,62',6
Solid Biofuels - Determination of particle size distribution for uncompressed fuels - Part
1: Oscillating screen method using sieves with apertures of 3,15 mm and above
(ISO/DIS 17827-1:2015)
Biogene Festbrennstoffe - Bestimmung der Partikelgrößenverteilung für unkomprimierte
Brennstoffe - Teil 1: Horizontales Rüttelsiebverfahren(ISO/DIS 17827-1:2015)
Biocombustibles solides - Détermination de la distribution granulométrique des
combustibles non comprimés - Partie 1: Méthode au tamis oscillant d'ouverture de maille
égale ou supérieure à 3,15 mm (ISO/DIS 17827-1:2015)
Ta slovenski standard je istoveten z: prEN ISO 17827-1
ICS:
27.190 Biološki viri in drugi Biological sources and
alternativni viri energije alternative sources of energy
75.160.10 Trda goriva Solid fuels
oSIST prEN ISO 17827-1:2015 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN ISO 17827-1:2015
---------------------- Page: 2 ----------------------
oSIST prEN ISO 17827-1:2015
DRAFT INTERNATIONAL STANDARD
ISO/DIS 17827-1
ISO/TC 238 Secretariat: SIS
Voting begins on: Voting terminates on:
2015-02-05 2015-05-05
Solid Biofuels — Determination of particle size
distribution for uncompressed fuels —
Part 1:
Oscillating screen method using sieves with apertures of
3,15 mm and above
Titre manque
ICS: 75.160.10; 27.190
ISO/CEN PARALLEL PROCESSING
This draft has been developed within the International Organization for
Standardization (ISO), and processed under the ISO lead mode of collaboration
as defined in the Vienna Agreement.
This draft is hereby submitted to the ISO member bodies and to the CEN member
bodies for a parallel five month enquiry.
Should this draft be accepted, a final draft, established on the basis of comments
received, will be submitted to a parallel two-month approval vote in ISO and
THIS DOCUMENT IS A DRAFT CIRCULATED
formal vote in CEN.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
To expedite distribution, this document is circulated as received from the
IN ADDITION TO THEIR EVALUATION AS
committee secretariat. ISO Central Secretariat work of editing and text
BEING ACCEPTABLE FOR INDUSTRIAL,
composition will be undertaken at publication stage.
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 17827-1:2014(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2014
---------------------- Page: 3 ----------------------
oSIST prEN ISO 17827-1:2015
ISO/DIS 17827-1:2014(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2014
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2014 – All rights reserved
---------------------- Page: 4 ----------------------
oSIST prEN ISO 17827-1:2015
ISO/DIS 17827-1:2014(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.