SIST ISO 11722:2000
(Main)Solid mineral fuels -- Hard coal -- Determination of moisture in the general analysis test sample by drying in nitrogen
Solid mineral fuels -- Hard coal -- Determination of moisture in the general analysis test sample by drying in nitrogen
Combustibles minéraux solides -- Houille -- Détermination de l'humidité de l'échantillon pour analyse par dessiccation en atmosphère d'azote
Trdna fosilna goriva - Črni premog - Določevanje vlage v splošni analizi preskusnega vzorca s sušenjem v dušiku
General Information
Buy Standard
Standards Content (Sample)
INTERNATIONAL ISO
STANDARD 11722
First edition
1999-05-01
Solid mineral fuels — Hard coal —
Determination of moisture in the general
analysis test sample by drying in nitrogen
Combustibles minéraux solides — Houille — Détermination de l'humidité de
l'échantillon pour analyse par dessiccation en atmosphère d'azote
A
Reference number
ISO 11722:1999(E)
---------------------- Page: 1 ----------------------
ISO 11722:1999(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 11722 was prepared by Technical Commitee ISO/TC 27, ,
Solid mineral fuels
Subcommittee SC 5, Methods of analysis.
Annex A of this International Standard is for information only.
© ISO 1999
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet iso@iso.ch
Printed in Switzerland
ii
---------------------- Page: 2 ----------------------
© ISO
ISO 11722:1999(E)
Introduction
The determination of the moisture in the general analysis test sample is required to correct the results of certain
analytical determinations, e. g., volatile matter and hydrogen, for the effect of water in the determination and to allow
all determinations to be corrected to dry basis.
Since hard coal is hygroscopic, its moisture will vary with change of humidity of the atmosphere and the moisture in
the general analysis test sample should therefore be determined whenever portions are weighed out for other
analytical determinations. If test portions for several analytical determinations are weighed out at the same time, a
single simultaneous moisture determination will suffice to correct those analyses.
iii
---------------------- Page: 3 ----------------------
INTERNATIONAL STANDARD © ISO ISO 11722:1999(E)
Solid mineral fuels — Hard coal — Determination of moisture in the
general analysis test sample by drying in nitrogen
1 Scope
This International Standard specifies a method for determining the moisture in the general analysis test sample of
hard coal by drying in nitrogen.
2 Normative reference
The following normative document contains provisions which, through reference in this text, constitute provisions of
this International Standard. For dated references, subsequent amendments to, or revisions of, such documents do
not apply. However, parties to agreements based on this International Standard are encouraged to investigate the
possibility of applying the most recent edition of the normative document indicated below. For undated references,
the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of
currently valid International Standards.
ISO 1213-2:1992, Solid mineral fuels — Vocabulary — Part 2: Terms relating to sampling, testing and analysis.
3 Definitions
For the purposes of this International Standard, the definitions given in ISO 1213-2 apply.
4 Principle
A known mass of the coal is heated in a stream of nitrogen at a temperature between 105 °C and 110 °C and
maintained at this temperature until it is constant in mass. The moisture content is calculated from the loss in mass
of the coal.
5 Reagent
Nitrogen, moisture-free, having an volume fraction of oxygen of less than 30 μl/l.
Commercially available nitrogen with a water content of less than 5 μl/l does not require further drying.
6 Apparatus
6.1 Analytical balance, capable of weighing to the nearest 0,1 mg.
6.2 Oven, capable of being controlled at a temperature of 105 °C to 110 °C and with provision for the nitrogen to
pass through it at a flow-rate of approximately 15 times the oven volume per hour and of lowest practical volume,
i.e. minimum free space.
NOT
...
SLOVENSKI STANDARD
SIST ISO 11722:2000
01-junij-2000
7UGQDIRVLOQDJRULYDýUQLSUHPRJ'RORþHYDQMHYODJHYVSORãQLDQDOL]L
SUHVNXVQHJDY]RUFDVVXãHQMHPYGXãLNX
Solid mineral fuels -- Hard coal -- Determination of moisture in the general analysis test
sample by drying in nitrogen
Combustibles minéraux solides -- Houille -- Détermination de l'humidité de l'échantillon
pour analyse par dessiccation en atmosphère d'azote
Ta slovenski standard je istoveten z: ISO 11722:1999
ICS:
73.040 Premogi Coals
SIST ISO 11722:2000 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ISO 11722:2000
---------------------- Page: 2 ----------------------
SIST ISO 11722:2000
INTERNATIONAL ISO
STANDARD 11722
First edition
1999-05-01
Solid mineral fuels — Hard coal —
Determination of moisture in the general
analysis test sample by drying in nitrogen
Combustibles minéraux solides — Houille — Détermination de l'humidité de
l'échantillon pour analyse par dessiccation en atmosphère d'azote
A
Reference number
ISO 11722:1999(E)
---------------------- Page: 3 ----------------------
SIST ISO 11722:2000
ISO 11722:1999(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO
member bodies). The work of preparing International Standards is normally carried out through ISO technical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote.
International Standard ISO 11722 was prepared by Technical Commitee ISO/TC 27, ,
Solid mineral fuels
Subcommittee SC 5, Methods of analysis.
Annex A of this International Standard is for information only.
© ISO 1999
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced
or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm, without permission in writing from the publisher.
International Organization for Standardization
Case postale 56 • CH-1211 Genève 20 • Switzerland
Internet iso@iso.ch
Printed in Switzerland
ii
---------------------- Page: 4 ----------------------
SIST ISO 11722:2000
© ISO
ISO 11722:1999(E)
Introduction
The determination of the moisture in the general analysis test sample is required to correct the results of certain
analytical determinations, e. g., volatile matter and hydrogen, for the effect of water in the determination and to allow
all determinations to be corrected to dry basis.
Since hard coal is hygroscopic, its moisture will vary with change of humidity of the atmosphere and the moisture in
the general analysis test sample should therefore be determined whenever portions are weighed out for other
analytical determinations. If test portions for several analytical determinations are weighed out at the same time, a
single simultaneous moisture determination will suffice to correct those analyses.
iii
---------------------- Page: 5 ----------------------
SIST ISO 11722:2000
---------------------- Page: 6 ----------------------
SIST ISO 11722:2000
INTERNATIONAL STANDARD © ISO ISO 11722:1999(E)
Solid mineral fuels — Hard coal — Determination of moisture in the
general analysis test sample by drying in nitrogen
1 Scope
This International Standard specifies a method for determining the moisture in the general analysis test sample of
hard coal by drying in nitrogen.
2 Normative reference
The following normative document contains provisions which, through reference in this text, constitute provisions of
this International Standard. For dated references, subsequent amendments to, or revisions of, such documents do
not apply. However, parties to agreements based on this International Standard are encouraged to investigate the
possibility of applying the most recent edition of the normative document indicated below. For undated references,
the latest edition of the normative document referred to applies. Members of ISO and IEC maintain registers of
currently valid International Standards.
ISO 1213-2:1992, Solid mineral fuels — Vocabulary — Part 2: Terms relating to sampling, testing and analysis.
3 Definitions
For the purposes of this International Standard, the definitions given in ISO 1213-2 apply.
4 Principle
A known mass of the coal is heated in a stream of nitrogen at a temperature between 105 °C and 110 °C and
maintained at this temperature until it is constant in mass. The moisture content is calculated from the loss in mass
of the coal.
5 Reagent
Nitrogen, moisture-free, having an volume fra
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.