SIST EN 17235:2024
(Main)Permanent anchor devices and safety hooks
Permanent anchor devices and safety hooks
This document defines requirements for anchor devices and safety hooks permanently fixed to buildings and structures.
Anchor devices intend to prevent persons from falling and arrest falls used in and on buildings and civil engineering works. Anchor devices meant to be secured in such a way that they are part of the construction work and intended to ensure the safety in use or in the functioning of a construction work pursuant to Regulation (EU) No 305/2011 of the European Parliament and of the Council.
The anchor devices are intended for the attachment of personal fall protection systems complying with EN 363.
The safety hooks are intended as anchor points to which personal fall protection systems complying with EN 363 are attached. The safety hooks are also intended to attach mobile roof ladders or work platforms.
This document also covers the fixings used to secure the anchor devices or safety hooks into the load bearing structure.
It specifies essential dimensions, materials and load-bearing requirements.
This document contains requirements for the following systems:
- single anchor point system;
- safety hook system;
- wire anchor line system;
- rail anchor line system.
The systems described in this document consist usually of several components. They must be evaluated as a system in its entirety.
This document also includes requirements for the durability, marking, installation, assembly, documentation, operating and maintenance.
This document is not applicable to:
- temporary anchor devices according to EN 795;
- facilities for roof access according to EN 516;
- permanently fixed ladders on roofs according to EN 12951.
Permanente Anschlageinrichtungen und Sicherheitsdachhaken
Dieses Dokument legt Anforderungen für Anschlageinrichtungen und Sicherheitshaken fest, die permanent an Gebäuden und Tragwerken befestigt sind.
Anschlageinrichtungen sollen Personen vor Abstürzen schützen und Abstürze auffangen, und sie werden an und in Gebäuden und Ingenieurbauten verwendet. Anschlageinrichtungen sollen derart zu befestigen sein, dass sie Teil des Bauwerks sind, und sie sind dafür vorgesehen, entsprechend Verordnung (EU) Nr. 305/2011 des Europäischen Parlaments und des Rates eine sichere Benutzung und eine sichere Durchführung der Bautätigkeit zu ermöglichen.
Die Anschlageinrichtungen sind für die Befestigung von persönlichen Absturzschutzsystemen nach EN 363 vorgesehen.
Die Sicherheitshaken sollen als Anschlagpunkte dienen, an denen persönliche Absturzschutzsysteme, die EN 363 erfüllen, befestigt werden. Die Sicherheitshaken sind außerdem für die Befestigung mobiler Dachleitern oder Arbeitsplattformen vorgesehen.
Dieses Dokument deckt außerdem die Befestigungen ab, die zum Sichern der Anschlageinrichtungen oder Sicherheitshaken an der lasttragenden Struktur verwendet werden.
Es legt wesentliche Abmessungen, Werkstoffe und Anforderungen an die Lastaufnahme fest.
Dieses Dokument enthält Anforderungen für die folgenden Systeme:
- Einzel-Anschlagpunktsystem;
- Sicherheitshakensystem;
- Kabel-Anschlagführungssystem;
- Schienen-Anschlagführungssystem.
Die in diesem Dokument beschrieben Systeme bestehen üblicherweise aus mehreren Komponenten. Sie müssen als vollständiges System bewertet werden.
Dieses Dokument enthält außerdem Anforderungen an Dauerhaftigkeit, Kennzeichnung, Einbau, Baugruppe, Dokumentation, Betrieb und Instandhaltung.
Dieses Dokument gilt nicht für:
- Abnehmbare Anschlageinrichtungen nach EN 795;
- Einrichtungen zum Betreten des Daches nach EN 516;
- fest installierte Dachleitern auf Dächern nach EN 12951.
Dispositifs d'ancrage et systèmes d’ancrage avec crochet de sécurité fixés à demeure
Le présent document définit les exigences applicables aux dispositifs d'ancrage et systèmes d'ancrage avec crochet de sécurité fixés à demeure sur les bâtiments et structures.
Les dispositifs d'ancrage sont destinés à empêcher les personnes travaillant sur des bâtiments ou des ouvrages de génie civil de tomber et à limiter leur chute. Les dispositifs d'ancrage doivent être fixés de sorte à faire partie de l'ouvrage de construction et sont destinés à garantir la sécurité dans le cadre de leur utilisation ou lors de la mise en service d'un ouvrage de construction conformément au Règlement (UE) n° 305/2011 du Parlement européen et du Conseil.
Les dispositifs d'ancrage sont destinés à fixer des systèmes de protection individuelle contre les chutes conformes à l'EN 363.
Les systèmes d'ancrage avec crochet de sécurité sont destinés à servir de points d'ancrage pour fixer des systèmes de protection individuelle contre les chutes conformes à l'EN 363. Les systèmes d'ancrage avec crochet de sécurité sont également destinés à fixer des échelles de couvreur ou des échafaudages de travail mobiles.
Le présent document couvre également les fixations utilisées pour fixer les dispositifs d'ancrage ou les systèmes d'ancrage avec crochet de sécurité sur la structure porteuse.
Elle spécifie les exigences essentielles en matière de dimensions, de matériaux et d'éléments porteurs.
Le présent document contient des exigences pour les systèmes suivants :
système à un seul point d'ancrage ;
système d'ancrage avec crochet de sécurité ;
système d'assurage flexible ;
système d'assurage rigide.
Les systèmes décrits dans le présent document sont généralement constitués de plusieurs composants. Ils doivent être évalués dans leur globalité.
Le présent document inclut également des exigences en matière de durabilité, de marquage, d'installation, d'assemblage, de documentation, de mise en oeuvre et de maintenance.
Le présent document ne s'applique pas aux :
dispositifs d'ancrage temporaires conformes à l'EN 795 ;
installations pour accès au toit conformes à l'EN 516 ;
échelles de couvreur fixées à demeure conformes à l'EN 12951.
Trajne sidrne naprave in varnostni kavlji
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2024
Trajne sidrne naprave in varnostni kavlji
Permanent anchor devices and safety hooks
Permanente Anschlageinrichtungen und Sicherheitsdachhaken
Dispositifs d'ancrage et systèmes d’ancrage avec crochet de sécurité fixés à demeure
Ta slovenski standard je istoveten z: EN 17235:2024
ICS:
13.340.60 Zaščita pred padci in zdrsi Protection against falling and
slipping
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 17235
EUROPEAN STANDARD
NORME EUROPÉENNE
September 2024
EUROPÄISCHE NORM
ICS 13.340.60
English Version
Permanent anchor devices and safety hooks
Dispositifs d'ancrage et systèmes d'ancrage avec Permanente Anschlageinrichtungen und
crochet de sécurité fixés à demeure Sicherheitsdachhaken
This European Standard was approved by CEN on 24 June 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 17235:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, symbols and abbreviated terms . 8
3.1 Terms and definitions . 8
3.2 Symbols and abbreviated terms . 13
4 Product characteristics . 13
4.1 General . 13
4.2 Mechanical resistance . 13
4.3 Water permeability . 13
4.4 Kit A . 14
4.5 Kit B . 14
4.6 Kit C . 15
4.7 Kit D . 15
5 Test methods . 16
5.1 General . 16
5.2 Test arrangements and apparatus . 19
5.2.1 Test lanyard and determination of free fall distance . 19
5.2.2 Test apparatus for static tests . 20
5.3 Kit A . 20
5.3.1 General . 20
5.3.2 Dynamic test . 21
5.3.3 Breaking load test . 22
5.4 Kit B . 22
5.4.1 General . 22
5.4.2 Hook base test . 23
5.4.3 Dynamic test . 23
5.4.4 Breaking load test . 24
5.5 Kit C . 24
5.5.1 General . 24
5.5.2 Test arrangements . 25
5.5.3 Dynamic test . 27
5.5.4 Breaking load test . 28
5.6 Kit D . 28
5.6.1 General . 28
5.6.2 Test arrangement . 29
5.6.3 Dynamic test . 32
5.6.4 Breaking load test . 32
5.7 Corrosion resistance . 33
5.8 Water permeability . 33
5.9 Test report . 33
6 Assessment and verification of constancy of performance (AVCP) . 34
6.1 General . 34
6.2 Assessment of performance . 34
6.2.1 General . 34
6.2.2 Test samples, testing and assessment criteria . 35
6.3 Verification of constancy of performance . 35
6.3.1 Factory production control (FPC) . 35
6.3.2 Initial inspection of factory and of FPC . 37
6.3.3 Continuous surveillance of FPC . 37
6.3.4 Audit-testing of samples. 37
Annex ZA (informative) Relationship of this European Standard with Regulation (EU)
No. 305/2011 . 38
ZA.1 Scope and relevant characteristics . 38
ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) . 40
ZA.3 Assignment of AVCP tasks . 40
Bibliography . 42
European foreword
This document (EN 17235:2024) has been prepared by Technical Committee CEN/TC 128 “Roof covering
products for discontinuous laying and products for wall cladding”, the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by March 2025, and conflicting national standards shall be
withdrawn at the latest by June 2026.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a standardization request addressed to CEN/CENELEC by the
European Commission. The Standing Committee of the EFTA States subsequently approves these
requests for its Member States.
For the relationship with EU Legislation, see informative Annex ZA, which is an integral part of this
document.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
Introduction
A reliable anchor device and safety hook are essential components to attach any personal fall protection
equipment.
This document is intended to act as a complementary standard for existing European Standards covering
other components used in fall protection systems.
Permanent anchor devices and safety hooks intend to prevent persons from falling and to arrest falls
used in and on buildings and civil engineering works. These products meant to be secured in such a way
that they are part of the construction work and intended to ensure the safety in use or in the functioning
of a construction work.
The purpose and scope of application and the performance characteristics are based on the need that, in
the case of fall from height, anchor kits and safety hook kits bear the dynamic force peak value generated
by the mass of one or more persons, including any equipment carried.
This document is intended for the testing of new products before placing them on the market and gives
only minimum per
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.