SIST EN 12608-4:2025
(Main)Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 4: PVC-U profiles with thermo-laminated foils
Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 4: PVC-U profiles with thermo-laminated foils
This document specifies the classifications, requirements and test methods for unplasticized poly(vinyl chloride) (PVC-U) profiles with thermo-laminated foils designed for external uses which are intended to be used for the fabrication of windows and doors.
NOTE 1 For editorial reasons, in this document, the term "window" is used for window/door.
NOTE 2 For the purpose of production control, test methods other than those specified in this document can be used.
Profile aus weichmacherfreiem Polyvinylchlorid (PVC-U) zur Herstellung von Fenstern und Türen – Klassifizierung, Anforderungen und Prüfverfahren – Teil 4: PVC-U-Profile mit thermo-kaschierten Folien
Dieses Dokument legt die Klassifizierungen, Anforderungen an und Prüfverfahren für folienkaschierte Profile aus weichmacherfreiem Polyvinylchlorid (PVC U) zur Herstellung von Fenstern und Türen fest, deren thermo-kaschierte Folien für den Außeneinsatz vorgesehen ist.
ANMERKUNG 1 Aus redaktionellen Gründen wird in diesem Dokument die Benennung "Fenster" für Fenster/Tür angewendet.
ANMERKUNG 2 Für die Produktionskontrolle können andere Prüfverfahren als die in diesem Dokument festgelegten verwendet werden.
Profilés de poly(chlorure de vinyle) non plastifié (PVC-U) pour la fabrication des fenêtres et des portes - Classification, exigences et méthodes d’essai - Partie 4 : Profilés en PVC-U avec des films thermo-laminés
Le présent document spécifie les classifications, les exigences et les méthodes d’essai des profilés de poly(chlorure de vinyle) non plastifié (PVC-U) avec films thermo-laminés conçus pour un usage extérieur, qui sont destinés à être utilisés pour la fabrication de fenêtres et de portes.
NOTE 1 Pour des raisons éditoriales, dans ce document le terme « fenêtre » est utilisé pour « fenêtre/porte ».
NOTE 2 Pour les besoins du contrôle de la production, des méthodes d’essai autres que celles spécifiées dans le présent document peuvent être utilisées.
Profili iz trdega polivinilklorida (PVC-U) za izdelavo oken in vrat - Razvrščanje, zahteve in preskusne metode - 4. del: PVC-U profili s termolaminiranimi folijami
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2025
Profili iz trdega polivinilklorida (PVC-U) za izdelavo oken in vrat - Razvrščanje,
zahteve in preskusne metode - 4. del: PVC-U profili s termolaminiranimi folijami
Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and
doors - Classification, requirements and test methods - Part 4: PVC-U profiles with
thermo-laminated foils
Profile aus weichmacherfreiem Polyvinylchlorid (PVC-U) zur Herstellung von Fenstern
und Türen – Klassifizierung, Anforderungen und Prüfverfahren – Teil 4: PVC-U-Profile
mit thermo-kaschierten Folien
Profilés de poly(chlorure de vinyle) non plastifié (PVC-U) pour la fabrication des fenêtres
et des portes - Classification, exigences et méthodes d’essai - Partie 4 : Profilés en PVC-
U avec des films thermo-laminés
Ta slovenski standard je istoveten z: EN 12608-4:2024
ICS:
83.140.99 Drugi izdelki iz gume in Other rubber and plastics
polimernih materialov products
91.060.50 Vrata in okna Doors and windows
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN 12608-4
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2024
EUROPÄISCHE NORM
ICS 83.140.99; 91.060.50
English Version
Unplasticized poly(vinyl chloride) (PVC-U) profiles for the
fabrication of windows and doors - Classification,
requirements and test methods - Part 4: PVC-U profiles
with thermo-laminated foils
Profilés de poly(chlorure de vinyle) non plastifié (PVC- Profile aus weichmacherfreiem Polyvinylchlorid (PVC-
U) pour la fabrication des fenêtres et des portes - U) zur Herstellung von Fenstern und Türen -
Classification, exigences et méthodes d'essai - Partie 4 : Klassifizierung, Anforderungen und Prüfverfahren -
Profilés en PVC-U avec des films thermo-laminés Teil 4: PVC-U-Profile mit thermo-kaschierten Folien
This European Standard was approved by CEN on 27 September 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12608-4:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Classifications . 4
5 Requirements for base profiles . 4
5.1 Base profiles in conformance with EN 12608-1 . 4
5.2 Other base profiles . 5
6 Requirements for foils . 5
7 Requirements for adhesion of the foil . 5
7.1 Adhesion of the foil. 5
7.2 Adhesion of the foil after hydrolytic/thermolytic storage . 5
8 Requirements for thermo-laminated profiles . 5
9 Test methods . 5
9.1 Determination of adhesion of the foil after hydrolytic/thermolytic storage . 5
9.1.1 Principle . 5
9.1.2 Apparatus and materials . 5
9.1.3 Storage and reconditioning . 5
9.1.4 Determination of the adhesion of the foil . 5
9.1.5 Test report . 5
10 Traceability . 6
European foreword
This document (EN 12608-4:2024) has been prepared by Technical Committee CEN/TC 249 “Plastics”,
the secretariat of which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2025, and conflicting national standards shall be
withdrawn a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.