SIST EN ISO 9455-17:2006
(Main)Soft soldering fluxes - Test methods - Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues (ISO 9455-17:2002)
Soft soldering fluxes - Test methods - Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues (ISO 9455-17:2002)
This part of ISO 9455 specifies a method of testing for deleterious effects that may arise from flux residues after soldering or tinning test coupons. The test is applicable to type 1 and type 2 fluxes, as specified in ISO 9454-1, in solid or liquid form, or in the form of flux-cored solder wire, solder preforms or solder paste constituted with eutectic or near-eutectic tin/lead (Sn/Pb) solders (ISO 9453:1990, Class E).
Flussmittel zum Weichlöten - Prüfverfahren - Teil 17: Bestimmung des Widerstandes der Oberflächenisolierung, Kammprüfung und elektrochemische Migrationsprüfung von Flussmittelrückständen (ISO 9455-17:2002)
Dieser Teil der ISO 9455 spezifiziert eine Testmethode zur Ermittlung von Schädigungen, die durch
Flussmittelrückstände nach dem Weichlöten oder nach dem Verzinnen von Proben entstehen. Der Test ist
anwendbar für Flussmittel der Typen 1 und 2, spezifiziert in der ISO 9455-1, in fester oder flüssiger Form, in
Lotdrähten, Lotformteilen oder Lotpasten in Verbindung mit eutektischen oder naheutektischen
Zinn(Sn-)Blei(PB-)Loten (ISO 9453:1990, Klasse E).
ANMERKUNG Diese Testmethode ist auch anwendbar für Flussmittel beim Einsatz von bleifreien Loten. Die
Löttemperaturen sollten jedoch zwischen dem Kunden und dem Testdurchführenden abgestimmt werden.
Flux de brasage tendre - Méthodes d'essai - Partie 17: Essai au peigne et essai de migration électrochimique de résistance d'isolement de surface des résidus de flux (ISO 9455-17:2002)
L'ISO 9455-17:2002 spécifie une méthode d'essai relative aux effets néfastes pouvant être provoqués par des résidus de flux après brasage tendre ou étamage de coupons d'essai. L'essai est applicable aux flux de type 1 et de type 2, tels que spécifiés dans l'ISO 9454-1, sous forme solide ou liquide, ou sous forme de fil d'apport à flux incorporé, de préformes ou de crème à braser constitués de métal d'apport étain/plomb (Sn/Pb) eutectique ou quasi-eutectique.
Cette méthode d'essai est également applicable aux flux à utiliser avec des métaux d'apport de brasage tendre sans plomb. Toutefois, les températures de brasage peuvent être convenues entre le responsable de l'essai et le client.
Talila za mehko spajkanje – Preskusne metode – 17. del: Preskus odpornosti površine izolacije z glavnikom in preskus elektrokemičnega prenosa talila (ISO 9455-17:2002)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 9455-17:2006
01-oktober-2006
7DOLOD]DPHKNRVSDMNDQMH±3UHVNXVQHPHWRGH±GHO 3UHVNXVRGSRUQRVWL
SRYUãLQHL]RODFLMH]JODYQLNRPLQSUHVNXVHOHNWURNHPLþQHJDSUHQRVDWDOLOD ,62
Soft soldering fluxes - Test methods - Part 17: Surface insulation resistance comb test
and electrochemical migration test of flux residues (ISO 9455-17:2002)
Flussmittel zum Weichlöten - Prüfverfahren - Teil 17: Bestimmung des Widerstandes der
Oberflächenisolierung, Kammprüfung und elektrochemische Migrationsprüfung von
Flussmittelrückständen (ISO 9455-17:2002)
Flux de brasage tendre - Méthodes d'essai - Partie 17: Essai au peigne et essai de
migration électrochimique de résistance d'isolement de surface des résidus de flux (ISO
9455-17:2002)
Ta slovenski standard je istoveten z: EN ISO 9455-17:2006
ICS:
25.160.50 Trdo in mehko lotanje Brazing and soldering
SIST EN ISO 9455-17:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 9455-17:2006
---------------------- Page: 2 ----------------------
SIST EN ISO 9455-17:2006
EUROPEAN STANDARD
EN ISO 9455-17
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2006
ICS 25.160.50
English Version
Soft soldering fluxes - Test methods - Part 17: Surface insulation
resistance comb test and electrochemical migration test of flux
residues (ISO 9455-17:2002)
Flux de brasage tendre - Méthodes d'essai - Partie 17: Flussmittel zum Weichlöten - Prüfverfahren - Teil 17:
Essai au peigne et essai de migration électrochimique de Bestimmung des Widerstandes der Oberflächenisolierung,
résistance d'isolement de surface des résidus de flux (ISO Kammprüfung und elektrochemische Migrationsprüfung
9455-17:2002) von Flussmittelrückständen (ISO 9455-17:2002)
This European Standard was approved by CEN on 2 June 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9455-17:2006: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 9455-17:2006
EN ISO 9455-17:2006 (E)
Foreword
The text of ISO 9455-17:2002 has been prepared by Technical Committee ISO/TC 44 "Welding
and allied processes” of the International Organization for Standardization (ISO) and has been
taken over as EN ISO 9455-17:2006 by Technical Committee CEN/TC 121 "Welding", the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by December 2006, and conflicting national
standards shall be withdrawn at the latest by December 2006.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 9455-17:2002 has been approved by CEN as EN ISO 9455-17:2006 without any
modifications.
2
---------------------- Page: 4 ----------------------
SIST EN ISO 9455-17:2006
INTERNATIONAL ISO
STANDARD 9455-17
First edition
2002-12-15
Soft soldering fluxes — Test methods —
Part 17:
Surface insulation resistance comb test
and electrochemical migration test of flux
residues
Flux de brasage tendre — Méthodes d'essai —
Partie 17: Essai au peigne et essai de migration électrochimique de
résistance d'isolement de surface des résidus de flux
Reference number
ISO 9455-17:20
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.