Aerospace series - Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread

This standard specifies the characteristics of self-locking, short, thin wall inserts, in NI-P100HT, with silver plated internal thread, for aerospace applications. Maximum test temperature: 550°C.

Luft- und Raumfahrt - Gewindeeinsätze, dünnwandig, selbstsichernd, kurz, aus hochwarmfester Nickelbasislegierung NI-P100HT (Inconel 718), Innengewinde versilbert

Diese Norm legt die Eigenschaften von selbstsichernden, kurzen, dünnwandigen Gewindeeinsätzen, aus NI-P100HT, mit versilbertem Innengewinde, zur Verwendung in der Luft- und Raumfahrt fest. Maximale Prüftemperatur: 550°C.

Série aérospatiale - Douilles filetées, a paroi mince, a freinage interne, courtes, en alliage résistant a chaud a base de nickel NI-P100HT (Inconel 718), filetage intérieur argenté

La présente norme spécifie les caractéristiques des douilles filetées à paroi mince, à freinage interne, courtes, en NI-P100HT, à filetage intérieur argenté, pour applications aérospatiales. Température maximale d'essai: 550°C.

Aerospace series - Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread

General Information

Status
Published
Publication Date
31-Dec-2000
ICS
49.030.99 - Other fasteners
Technical Committee
SS SPL - Technical Board for the general field
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
01-Jan-2001
Due Date
01-Jan-2001
Completion Date
01-Jan-2001
Ref Project
EN 3236:1998 - Aerospace series - Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread

Overview

SIST EN 3236:2001 is a European standard developed by CEN, specifying the technical requirements for aerospace-grade inserts. These inserts are characterized as thin wall, self-locking, and short, made from the heat-resistant nickel base alloy NI-P100HT (commonly known as Inconel 718). They feature silver-plated internal threads designed for high-temperature aerospace applications, with a maximum test temperature of 550°C. This standard ensures the performance, reliability, and safety of threaded inserts used in demanding aerospace environments.

Key Topics

  • Material Composition
    The inserts conform to a high-performance nickel base alloy, NI-P100HT (Inconel 718), recognized for excellent heat resistance and mechanical strength in challenging temperature conditions.

  • Design Characteristics

    • Thin wall construction for weight saving and space efficiency
    • Short length inserts suitable for limited installation depths
    • Self-locking threading to prevent loosening under vibration or thermal cycling

  • Surface Treatment
    Silver plating on internal threads enhances corrosion resistance and ensures reliable thread engagement in aerospace assemblies.

  • Performance Requirements
    Inserts are tested to withstand temperatures up to 550°C without degradation, making them suitable for engine compartments and other high-temperature zones.

  • Compliance Metrics
    The standard defines precise dimensional, mechanical, and material properties to guarantee interoperability and consistent quality in aerospace fastener systems.

Applications

SIST EN 3236:2001 inserts are critical components in aerospace manufacturing and maintenance, offering reliable fastening solutions in environments exposed to high heat and mechanical stress. Typical applications include:

  • Aircraft engine components and assemblies
  • Structural fastening in hot sections of aerospace vehicles
  • Systems requiring weight-optimized, corrosion-resistant fasteners
  • Repair and overhaul processes involving high-performance threaded inserts
  • Specialty aerospace fastenings where vibration resistance is essential

These inserts enable designers and engineers to maintain structural integrity and safety while meeting stringent aerospace industry standards.

Related Standards

Professionals working with SIST EN 3236:2001 may also refer to complementary standards to ensure full compliance and system compatibility:

  • EN 2592 - Aerospace series - High-strength threaded inserts
  • EN 2136 - Aerospace fastener material specifications
  • ISO 10843 - Self-locking threaded inserts for industrial applications
  • FAA AC 20-107B - Aircraft hardware standards including inserts and fasteners

Adhering to these related standards alongside EN 3236 ensures comprehensive quality control and optimized performance in aerospace fastener design and application.

Keywords: SIST EN 3236:2001, aerospace inserts, self-locking thread inserts, Inconel 718 inserts, heat resistant fasteners, silver plated internal thread, NI-P100HT alloy, aerospace fasteners, high temperature inserts, thin wall inserts, aerospace thread inserts

Frequently Asked Questions

SIST EN 3236:2001 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy NI-P100HT (Inconel 718), silver plated internal thread". This standard covers: This standard specifies the characteristics of self-locking, short, thin wall inserts, in NI-P100HT, with silver plated internal thread, for aerospace applications. Maximum test temperature: 550°C.

This standard specifies the characteristics of self-locking, short, thin wall inserts, in NI-P100HT, with silver plated internal thread, for aerospace applications. Maximum test temperature: 550°C.

SIST EN 3236:2001 is classified under the following ICS (International Classification for Standards) categories: 49.030.99 - Other fasteners. The ICS classification helps identify the subject area and facilitates finding related standards.

SIST EN 3236:2001 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-januar-2001
Aerospace series - Inserts, thin wall, self-locking, short, in heat resisting nickel
base alloy NI-P100HT (Inconel 718), silver plated internal thread
Aerospace series - Inserts, thin wall, self-locking, short, in heat resisting nickel base alloy
NI-P100HT (Inconel 718), silver plated internal thread
Luft- und Raumfahrt - Gewindeeinsätze, dünnwandig, selbstsichernd, kurz, aus
hochwarmfester Nickelbasislegierung NI-P100HT (Inconel 718), Innengewinde versilbert
Série aérospatiale - Douilles filetées, a paroi mince, a freinage interne, courtes, en
alliage résistant a chaud a base de nickel NI-P100HT (Inconel 718), filetage intérieur
argenté
Ta slovenski standard je istoveten z: EN 3236:1998
ICS:
49.030.99
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...