SIST-TS CEN ISO/TS 16407-1:2011

SLOVENSKI STANDARD
SIST-TS CEN ISO/TS 16407-1:2011
01-december-2011
(OHNWURQVNRSRELUDQMHSULVWRMELQ8JRWDYOMDQMHVNODGQRVWLRSUHPHVWHKQLþQR
VSHFLILNDFLMR,6276GHO=JUDGEDSUHVNXãHYDOQHJDQL]DLQQDPHQ
SUHVNXãDQMD,6276
Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-1 -
Part 1: Test suite structure and test purposes (ISO/TS 16407-1:2011)
Elektronische Gebührenerfassung - Konformitätsevaluierung von Geräten gemäß CEN
ISO/TS 17575-1 - Teil 1: Struktur der Testfälle und deren Absichten (ISO/TS 16407-
1:2011)
Perception du télépéage - Évaluation de la conformité de l'équipement à l'ISO/TS 17575-
1 - Partie 1: Structure de la suite d'essais et objectifs des essais (ISO/TS 16407-1:2011)
Ta slovenski standard je istoveten z: CEN ISO/TS 16407-1:2011
ICS:
03.220.20 Cestni transport Road transport
35.240.60 Uporabniške rešitve IT v IT applications in transport
transportu in trgovini and trade
SIST-TS CEN ISO/TS 16407-1:2011 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CEN ISO/TS 16407-1:2011

---------------------- Page: 2 ----------------------

SIST-TS CEN ISO/TS 16407-1:2011


TECHNICAL SPECIFICATION
CEN ISO/TS 16407-1

SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION
October 2011
ICS 35.240.60; 03.220.20
English Version
Electronic fee collection - Evaluation of equipment for conformity
to ISO/TS 17575-1 - Part 1: Test suite structure and test
purposes (ISO/TS 16407-1:2011)
Perception du télépéage - Évaluation de la conformité de Elektronische Gebührenerfassung -
l'équipement à l'ISO/TS 17575-1 - Partie 1: Structure de la Konformitätsevaluierung von Geräten gemäß CEN ISO/TS
suite d'essais et objectifs des essais (ISO/TS 16407- 17575-1 - Teil 1: Struktur der Testfälle und deren Absichten
1:2011) (ISO/TS 16407-1:2011)
This Technical Specification (CEN/TS) was approved by CEN on 15 August 2011 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their
comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available
promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS)
until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN ISO/TS 16407-1:2011: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST-TS CEN ISO/TS 16407-1:2011
CEN ISO/TS 16407-1:2011 (E)
Contents Page
Foreword .3

2

---------------------- Page: 4 ----------------------

SIST-TS CEN ISO/TS 16407-1:2011
CEN ISO/TS 16407-1:2011 (E)
Foreword
This document (CEN ISO/TS 16407-1:2011) has been prepared by Technical Committee CEN/TC 278 “Road
transport and traffic telematics”, the secretariat of which is held by NEN, in collaboration with Technical
Committee ISO/TC 204 “Intelligent transport systems”.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
3

---------------------- Page: 5 ----------------------

SIST-TS CEN ISO/TS 16407-1:2011

---------------------- Page: 6 ----------------------

SIST-TS CEN ISO/TS 16407-1:2011

TECHNICAL ISO/TS
SPECIFICATION 16407-1
First edition
2011-10-15

Electronic fee collection — Evaluation
of equipment for conformity to
ISO/TS 17575-1 —
Part 1:
Test suite structure and test purposes
Perception du télépéage — Évaluation de la conformité de l'équipement
à l'ISO/TS 17575-1 —
Partie 1: Structure de la suite d'essais et objectifs des essais




Reference number
ISO/TS 16407-1:2011(E)
©
ISO 2011

---------------------- Page: 7 ----------------------

SIST-TS CEN ISO/TS 16407-1:2011
ISO/TS 16407-1:2011(E)

COPYRIGHT PROTECTED DOCUMENT


©  ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56  CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland

ii © ISO 2011 – All rights reserved

---------------------- Page: 8 ----------------------

SIST-TS CEN ISO/TS 16407-1:2011
ISO/TS 16407-1:2011(E)
Contents Page
Foreword . iv
Introduction . v
1  Scope . 1
2  Normative references . 2
3  Terms and definitions . 2
4  Abbreviated terms . 3
5  Value added tax (VAT) Test Suite Structure (TSS) . 4
5.1  Structure . 4
5.2  Reference to conformance test specifications . 4
5.3  Test purposes (TP) . 5
5.4  Conformance test report . 6
Annex A (normative) Test purposes (TP) for Front End . 7
Annex B (normative) Test purposes (TP) for Back End . 87
Annex C (normative) Data Structures . 90
Annex D (normative) PCTR for Front End . 91
Annex E (normative) PCTR for Back End . 97
Bibliography . 101

© ISO 2011 – All rights reserved iii

---------------------- Page: 9 ----------------------

SIST-TS CEN ISO/TS 16407-1:2011
ISO/TS 16407-1:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
In other circumstances, particularly when there is an urgent market requirement for such documents, a
technical committee may decide to publish other types of document:
— an ISO Publicly Available Specification (ISO/PAS) represents an agreement between technical experts in
an ISO working group and is accepted for publication if it is approved by more than 50 % of the members
of the parent committee casting a vote;
— an ISO Technical Specification (ISO/TS) represents an agreement between the members of a technical
committee and is accepted for publication if it is approved by 2/3 of the members of the committee casting
a vote.
An ISO/PAS or ISO/TS is reviewed after three years in order to decide whether it will be confirmed for a
further three years, revised to become an International Standard, or withdrawn. If the ISO/PAS or ISO/TS is
confirmed, it is reviewed again after a further three years, at which time it must either be transformed into an
International Standard or be withdrawn.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO/TS 16407-1 was prepared by Technical Committee ISO/TC 204, Intelligent transport systems, in
collaboration with Technical Committee CEN/TC 278, Road Transport and Traffic Telematics.
ISO/TS 16407 consists of the following parts, under the general title Electronic fee collection — Evaluation of
equipment for conformity to ISO/TS 17575-1:
— Part 1: Test suite structure and test purposes
— Part 2: Abstract test suite

iv © ISO 2011 – All rights reserved

---------------------- Page: 10 ----------------------

SIST-TS CEN ISO/TS 16407-1:2011
ISO/TS 16407-1:2011(E)
Introduction
This part of ISO/TS 16407 is part of a set of standards that supports interoperability of autonomous electronic
fee collection (EFC) systems, which includes ISO/TS 17575 parts 1 to 4 that define the EFC context data,
their charge reports and their use of communication infrastructure.
Within the suite of EFC standards, this conformance evaluation procedure defines the process and tests for
conformity evaluation of Front End and Back End that comply with the requirements in ISO/TS 17575-1.
This part of ISO/TS 16407 is intended to
 assess Front End and Back End capabilities,
 assess Front End and Back End behaviour,
 serve as a guide for Front End and Back End conformance evaluations and type approvals,
 achieve comparability between the results of the corresponding tests applied in different places at
different times, and
 facilitate communication between parties.
This part of ISO 16407 is based on
 ISO/TS 17575-1, and
 the ISO 9646 family of standards on conformance test methodology.

© ISO 2011 – All rights reserved v

---------------------- Page: 11 ----------------------

SIST-TS CEN ISO/TS 16407-1:2011

---------------------- Page: 12 ----------------------

SIST-TS CEN ISO/TS 16407-1:2011
TECHNICAL SPECIFICATION ISO/TS 16407-1:2011(E)

Electronic fee collection — Evaluation of equipment for
conformity to ISO/TS 17575-1 —
Part 1:
Test suite structure and test purposes
1 Scope
This part of ISO/TS 16407 specifies the test suite structure (TSS) and test purposes (TP) to evaluate the
conformity of Front End and Back End to ISO/TS 17575-1.
The objective of this part of ISO/TS 16407 is to provide a basis for conformance tests for the Front End and
the Back End in electronic fee collection (EFC) based on autonomous on-board equipment (OBE) to enable
interoperability between different equipment supplied by different manufacturers.
Autonomous OBE operates without relying on dedicated road-side infrastructure by employing wide-area
technologies such as global navigation satellite systems (GNSS) and cellular communications networks (CN).
These EFC systems are referred to by a variety of names. Besides the terms autonomous systems and
GNSS/CN systems, also the terms GPS/GSM systems and wide-area charging systems are in use.
Autonomous systems use satellite positioning, often combined with additional sensor technologies such as
gyroscopes, odometers, and accelerometers, to localise the vehicle and to find its position on a map
containing the charged geographic objects, such as charged roads or charged areas. From the charged
objects, the vehicle characteristics, the time of day and other data that are relevant for describing road use,
the tariff and ultimately the road usage fee is determined.
The testing of the following behaviours and functionalities is outside of the scope of this part of ISO/TS 16407:
 dynamic behaviour, i.e. sequence of messages and triggering events that must be exchanged/happen to
fulfil certain charging scenarios;
 profiles and business logic built on top of particular pricing schemas;
 authentication, as its handling is not described in ISO/TS 17575-1;
 account update procedure ("reload" and "add to account") with respect to time and duration based on on-
board accounts, as run-time environment has significant impact on test purpose outcome.
As ISO/TS 17575-1 does not specify any invalid behaviour of Front End and Back End, BI test purposes are
not applicable for any test purpose group.
As ISO/TS 17575-1 does not define which of the data elements shall be present in the charge report response
(CRR) (and under which conditions), the scope of test purposes (TP) for Back End is very limited.
© ISO 2011 – All rights reserved 1

---------------------- Page: 13 ----------------------

SIST-TS CEN ISO/TS 16407-1:2011
ISO/TS 16407-1:2011(E)
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO/IEC 9646-6, Information technology — Open Systems Interconnection — Conformance testing
methodology and framework — Part 6: Protocol profile test specification
ISO/TS 17575-1, Electronic fee collection — Application interface definition for autonomous systems —
Part 1: Charging
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
3.1
attribute
application information formed by one or by a sequence of data elements, and that is managed by different
actions used for implementation of a transaction
[ISO 14906:2011, definition 3.3]
3.2
authenticator
data appended to, or a cryptographic transformation of, a data unit that allows a recipient of the data unit to
prove the source and/or the integrity of the data unit and protect against forgery
[ISO 14906:2011, definition 3.4]
3.3
Back End
generic name for the computing and communication facilities of the Service Provider and/or the Toll Charger
[ISO/TS 17575-1:2010, definition 3.4]
3.4
charge report
data structure transmitted from the Front End to the Back End to report road usage data and supplementary
related information
[ISO/TS 17575-1:2010, definition 3.5]
3.5
contract
expression of an agreement between two or more parties concerning the use of the road infrastructure
[ISO 14906:2011, definition 3.7]
3.6
data element
datum, which might itself consist of lower level data elements
[ISO/TS 17575-1:2010, definition 3.10]
2 © ISO 2011 – All rights reserved

---------------------- Page: 14 ----------------------

SIST-TS CEN ISO/TS 16407-1:2011
ISO/TS 16407-1:2011(E)
3.7
Front End
part(s) of the toll system where road usage data for an individual road user are collected, processed and
delivered to the Back End
NOTE The Front End comprises the on-board equipment and an optional proxy.
[ISO/TS 17575-1:2010, definition 3.13]
3.8
service provider
operator that accepts the user's payment means and in return provides a road-use service to the user
NOTE Taken from ISO 14906:2004.
3.9
toll charger
legal entity charging a toll for vehicles in a toll domain
[ISO/TS 17574:2009, definition 3.27]
3.10
toll context
logical view of a toll scheme as defined by attributes and functions
[ISO/TS 17575-1:2010, definition 3.22]
3.11
toll regime
set of rules, including enforcement rules, governing the collection of toll in a toll
[ISO/TS 17575-1:2010, definition 3.25]
4 Abbreviated terms
For the purposes of this document, the following abbreviated terms apply.
ADU Application data unit (ISO/TS 17575-1)
ASN.1 Abstract Syntax Notation One (ISO/IEC 8824-1:2002)
ATS Abstract Test Suite
BI Invalid Behaviour
BV Valid Behaviour
CCC Compliance Check Communication (ISO/TS 12813)
CN Cellular network (ISO/TS 17575-1)
CRR Charge Report Response
DUT Device Under Test
EFC Electronic Fee Collection (ISO 17573)
GNSS Global Navigation Satellite Systems (ISO/TS 17575-1)
© ISO 2011 – All rights reserved 3

---------------------- Page: 15 ----------------------

SIST-TS CEN ISO/TS 16407-1:2011
ISO/TS 16407-1:2011(E)
HMI Human Machine Interface (ISO/TS 17575-1)
ID Identifier
OBE On-board Equipment (ISO/TS 17575-1)
PCTR Proforma Conformance Test Report
PICS Protocol Implementation Conformance Statements
TP Test Purposes
TSS Test Suite Structure
VAT Value Added Tax (ISO/TS 17575-1)
5 Value added tax (VAT) Test Suite Structure (TSS)
5.1 Structure
Table 1 shows the Test Suite Structure (TSS).
Table 1 — Test Suite Structures
Group Type of DUT Behaviour
Charge Report Front End Valid Behaviour
Invalid Behaviour not
applicable
Back End Feedback Front End Valid Behaviour
Invalid Behaviour not
applicable
Charge Report Response Back End Valid Behaviour
Invalid Behaviour not
applicable
5.2 Reference to conformance test specifications
This document takes into account already defined test purposes for conformance to the base standards by
referencing them, so that
a) for test purposes that are identical to those defined in the base standards conformance test cases direct
reference is reported; for reader’s convenience, the title or a verbal description of the referenced test
purpose is given, together with the reference;
b) for test purposes that are derived from those defined in the base standards conformance test cases, a
direct reference is reported, plus an indication on how the referred test purpose has to be modified for the
profile conformance testing;
c) for test purposes that are specific to ISO/TS 17575-1, a complete description is given;
d) an indication on whether a test purpose is identical, derived, or specific is given in each test purpose.
4 © ISO 2011 – All rights reserved

---------------------- Page: 16 ----------------------

SIST-TS CEN ISO/TS 16407-1:2011
ISO/TS 16407-1:2011(E)
5.3 Test purposes (TP)
5.3.1 TP definition conventions
The TPs are defined following the rules shown in Table 2 below. All test purposes are defined in Annex A and
Annex B, including the special notation and symbol conventions that shall be used. The data structures that
shall be used are specified in Annex C and defined in ISO/TS 17575-1.
Table 2 — TP Definition Rules
TP ID according to the TP naming Title
conventions
Reference
TP origin
Initial condition
Stimulus and expected behaviour

TP ID The TP ID is a unique identifier. It shall be specified according to
the TP naming conventions defined in the sub-clause below.
Title Short description of Test Purpose objective.
Reference The reference should contain the references of the subject to be
validated by the actual TP (specification reference, clause,
paragraph), or the reference to the standard document defining
the TP.
TP origin Indicates if the TP is identical to a TP defined in another test
standard, derived from a TP defined in another test standard, or
specific for this standard profile.
Initial condition The condition defines in which initial state the DUT has to be to
apply the actual TP.
Stimulus and expected Definition of the events the tester performs, and the events that are
behaviour expected from the
DUT to conform to the base specification.
5.3.2 TP naming conventions
Each TP is given a unique identification. This unique identification is built up to contain the following string of
information:
TP///-
TP  : to indicate that it is a Test Purpose;
: which group TP belongs to;
 : type of DUT (i.e. FE or BE);
X  : type of testing (i.e. Valid Behaviour tests – BV, or Invalid Behaviour tests – BI)
 : sequential TP number (01-99)
© ISO 2011 – All rights reserved 5

---------------------- Page: 17 ----------------------

SIST-TS CEN ISO/TS 16407-1:2011
ISO/TS 16407-1:2011(E)
The naming conventions are as described in Table 3.
Table 3 — TP naming convention

Identifier:
TP///-

applicable for FE
CR Charge Report
applicable for FE
BEF Back End Feedback
applicable for BE
CRR Charge Report Response


= type of DUT FE Front End
 BE Back End
x = Type of testing BV Valid Behaviour Tests
 BI Invalid Behaviour Tests
= sequential (01-99) Test Purpose Number
number
5.4 Conformance test report
The supplier of the Front End and Back End, respectively, is responsible for providing a conformance test
report.
The supplier of the Front End shall complete the proforma conformance test report (PCTR) for Front End as
defined in Annex D.
The supplier of the Back End shall complete the proforma conformance test report (PCTR) for Back End as
defined in Annex E.

6 © ISO 2011 – All rights reserved

---------------------- Page: 18 ----------------------

SIST-TS CEN ISO/TS 16407-1:2011
ISO/TS 16407-1:2011(E)
Annex A
(normative)

Test purposes (TP) for Front End
A.1 Introduction
This annex contains the Test Purposes (TP) for the conformity evaluation of Front End to ISO/TS 17575-1.
A.1.1 TP symbols conventions
A special notation and symbol convention shall be used, as defined in what follows.
Symbols are used in the description of the TPs, with meanings according to Table A.1 below.
Table A.1 — Description of TP Symbols
SYMBOL DESCRIPTION
XXX.rq  The Tester sends the XXX.rq to the DUT
 YYY.rs The DUT sends the YYY.rs to the Tester
 YYY.rs = {attribute1, The DUT sends the YYY.rs to the Tester. YYY.rs shall not
attribute2, attribute3} consist of any attributes different than attribute1, attribute2,
attribute3. If any of attributes in the list is optional it may be
missing in YYY.rs.
 YYY.rs = {attribute1= The DUT sends the YYY.rs to the Tester with attribute1.
value1} Value of attribute1, i.e. value1 shall be stored by the tester
and will be utilized in further TP steps.
A ≡ B A “is equal to” B
A → B A “is transformed” into B
Ø Means “empty” or “not set”
A | B A OR B

x → n
Value of parameter x is very close to n and x is less than n

x → n
Value of parameter x is very close to n and x greater than n
In addition, it has to be noted that the sequence of ADUs issued by an Front End is not constrained by
ISO/TS 17575-1. This means that ADU cannot in general be forced to be generated by the DUT. To execute
the test purposes it may be needed to filter out some ADUs, as they might not be applicable for TP, e.g. some
ADUs are applicable for different toll regime. Such situation is illustrated in Figure A.1.
© ISO 2011 – All rights reserved 7

---------------------- Page: 19 ----------------------

SIST-TS CEN ISO/TS 16407-1:2011
ISO/TS 16407-1:2011(E)
Charge Report Charge Report

ADU #1 ADU #1
Charge Report
ADU #2
Charge Report Charge Report
ADU#3 ADU#3
ADU Filter TP Execution
Front End
Charge Report Charge Report
(TP specific) Engine
ADU#4 ADU#4
Charge Report
ADU #5
Charge Report Charge Report
ADU#6 ADU#6

Figure A.1 — Handling of ADUs applicable for particular TP
A.2 Charge Report
These Test Purposes apply to data elements in Charge Report as claimed in ISO/TS 17575-1
Clause B.2/ChargeReport, Clause B.3.1, Clause B.3.3.
NOTE No test purposes for invalid behaviour are specified (BI), as ISO/TS 17575-1 does not specify any invalid
behaviour of Front End.
A.2.1 BV test purposes
Test subgroup objective:
 to test the behaviour of the DUT with respect to data elements contained in Charge Report.

8 © ISO 2011 – All rights reserved

---------------------- Page: 20 ----------------------

SIST-TS CEN ISO/TS 16407-1:2011
ISO/TS 16407-1:2011(E)
TP/CR/FE/BV/02 Verify that Time of Report is according to the local time
TP Origin Specific
Reference ISO/TS 17575-1, Clause 6.3.2
Initial Condition Front End received already Context Data with correctly set timeZone attribute.
Front End is initialized and has a toll context activated.
No authentication is required.
Stimulus and Expected Behaviour
DUT Tester
1 ChargeReport = { obeId, vehicleLPNr, 
paymentMeans, serviceProviderContract,

tollCharger, timeOfReport, reportPeriod, versionInfo,
usageStatementList, vatForThisSession,
accountStatus, transactionCounter, mileage,
listOfCCCAttributes, authenticator}
2
 Verify structure of sent ChargeReport, taking presence
and absence of optional data elements into account and
verify allowed values of present data elements according
to Table C.1
3  IF verify NOT “OK” THEN TP failed
4  Verify that timeofReport is according to the local time
5  IF verify “OK” OR timeofReport not present
THEN TP passed
ELSE TP failed
ENDIF
6
 ChargeReportResponse = { reportRecipientId = any,
dataReceived = (ChargeReport.timeOfReport |
ChargeReport.mileage |
ChargeReport.transactionCounter), versionsResponse =
ø, obeStatusForDriver = 0, accountUpdate = ø,
responseAuthenticator = ø}

© ISO 2011 – All rights reserved 9

---------------------- Page: 21 ----------------------

SIST-TS CEN ISO/TS 16407-1:2011
ISO/TS 16407-1:2011(E)
TP/CR/FE/BV/03 Verify that Transaction Counter is incremented
TP Origin Specific
Reference ISO/TS 17575-1, Clause 6.3.5
Initial Condition Front End received already Context Data with Charge Report Configuration
requesting transactionCounter to be present.
Front End is initialized and has a toll context activated.
No authentication is required.
Stimulus and Expected Behaviour
DUT Tester
1
ChargeReport = { obeId, vehicleLPNr, 
paymentMeans, serviceProviderContract,

tollCharger, timeOfReport, reportPeriod, versionInfo,
usageStatementList, vatForThisSession,
accountStatus, transactionCounter = v1, mileage,
listOfCCCAttributes, authenticator}
2  Verify structure of sent ChargeReport, taking presence
and absence of optional data elements into account and
verify allowed values of present data elements according
to Table C.1
3
 IF verify NOT “OK” THEN TP failed
4
 ChargeReportResponse = { reportRecipientId = any,
dataReceived = (ChargeReport.timeOfReport |
ChargeReport.mileage |
ChargeReport.transactionCounter), versionsResponse =
ø, obeStatusForDriver = 0, accountUpdate = ø,
responseAuthenticator = ø}
5 ChargeReport = { obeId, vehicleLPNr, 
paymentMeans, serviceProviderContract,

tollCharger, timeOfReport, reportPeriod, versionInfo,
usageStatementList, vatForThisSession,
accountStatus, transactionCounter = v2, mileage,
listOfCCCAttributes, authenticator}
6
 Verify structure of sent ChargeReport, taking presence
and absence of optional data elements into account and
verify allowed values of present data elements according
to Table C.1
7  IF verify NOT “OK” THEN TP failed
8  IF v2-v1 equals to 1
THEN TP passed
ELSE TP failed
ENDIF
9
 ChargeReportResponse = { reportRecipientId = any,
dataReceived = (ChargeReport.timeOfReport |
ChargeReport.mileage |
ChargeReport.transactionCounter), versionsResponse =
ø, obeStatusForDriver = 0, accountUpdate = ø,
responseAuthenticator = ø}

10 © ISO 2011 – All rights reserved
...