SIST EN ISO 25197:2020/A11:2023

SLOVENSKI STANDARD
01-julij-2023
Mala plovila - Električni/elektronski regulacijski sistem za krmarjenje, prestavljanje
in pogon - Dopolnilo A11
Small craft - Electrical/electronic control systems for steering, shift and throttle
Kleine Wasserfahrzeuge - Elektrische/elektronische Regelungssysteme für Steuerung,
Schaltung und Antrieb
Petits navires - Systèmes électriques/électroniques pour le contrôle de la direction, de
l'inverseur et des gaz
Ta slovenski standard je istoveten z: EN ISO 25197:2020/A11:2023
ICS:
47.020.60 Električna oprema ladij in Electrical equipment of ships
konstrukcij na morju and of marine structures
47.080 Čolni Small craft
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 25197:2020/A11
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2023
EUROPÄISCHE NORM
ICS 47.080
English Version
Small craft - Electrical/electronic control systems for
steering, shift and throttle
Petits navires - Systèmes électriques/électroniques Kleine Wasserfahrzeuge - Elektrische/elektronische
pour le contrôle de la direction, de l'inverseur et des Regelungssysteme für Steuerung, Schaltung und
gaz Antrieb
This amendment A11 modifies the European Standard EN ISO 25197:2020; it was approved by CEN on 15 February 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 25197:2020/A11:2023 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
Annex ZA (informative) Relationship between this European Standard and the essential
requirements of Directive 2013/53/EU aimed to be covered . 4

European foreword
This document (EN ISO 25197:2020/A11:2023) has been prepared by Technical Committee
CEN/TC 464 “Small Craft” the secretariat of which is held by SIS.
This Amendment to the European Standard EN ISO 25197:2020 shall be given the status of a
national standard, either by publication of an identical text or by endorsement, at the latest by
October 2023, and conflicting national standards shall be withdrawn at the latest by October
2023.
Attention is drawn to the possibility that some of the elements of this document may be the
subject of patent rights. CEN shall not be held responsible for identifying any or all such patent
rights.
This document has been prepared under a Standardization Request given to CEN by the
European Commission and the European Free Trade Association, and supports essential
requirements of EU Directive(s) / Regulation(s).
For the relationship with EU Directive(s) see informative Annex ZA, which is an integral part of
this document.
Any feedback and questions on this document should be directed to the users’ national
standards body/national committee. A complete listing of these bodies can be found on the CEN
website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Türkiye and the United Kingdom.

Annex ZA
(informative)
Relationship between this European Standard and the essential
requirements of Directive 2013/53/EU aimed to be covered
This European Standard has been prepared under a Commission’s standardization request
M/542/C(2015) 8736 final to provide one voluntary means of conforming to essential
requirements of Directive 2013/53/EU.
Once this standard is cited in the Official Journal of the European Union under that Directive,
compliance with the normative clauses of this standard given in Table ZA.1 confers, within the
limits of the scope of this standard, a presumption of conformity with the corresponding
essential requirements of that Directive, and associated EFTA regulations.
Table ZA.1 — Correspondence between this European Standard and Annex I and II of
Directive 2013/53/EU
Essential Requirements of Clause(s)/sub- Remarks/Notes
Directiv
...