SIST EN ISO 898-3:2018/A1:2021
(Amendment)Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes - Amendment 1 (ISO 898-3:2018/Amd 1:2020)
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes - Amendment 1 (ISO 898-3:2018/Amd 1:2020)
Mechanische Eigenschaften von Verbindungselementen aus Kohlenstoffstahl und legiertem Stahl - Teil 3: Flache Scheiben mit festgelegten Festigkeitsklassen - ÄNDERUNG 1 (ISO 898-3:2018/Amd 1:2020)
No scope available
Caractéristiques mécaniques des fixations en acier au carbone et en acier allié - Partie 3: Rondelles de forme plane de classes de qualité spécifiées - Amendement 1 (ISO 898-3:2018/Amd 1:2020)
Mehanske lastnosti veznih elementov, narejenih iz ogljikovega jekla in jeklene zlitine - 3. del: Ploščate podložke z določenimi razredi trdnosti - Dopolnilo A1 (ISO 898-3:2018/Amd 1:2020)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 898-3:2018/A1:2021
01-julij-2021
Mehanske lastnosti veznih elementov, narejenih iz ogljikovega jekla in jeklene
zlitine - 3. del: Ploščate podložke z določenimi razredi trdnosti - Dopolnilo A1 (ISO
898-3:2018/Amd 1:2020)
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat
washers with specified property classes - Amendment 1 (ISO 898-3:2018/Amd 1:2020)
Mechanische Eigenschaften von Verbindungselementen aus Kohlenstoffstahl und
legiertem Stahl - Teil 3: Flache Scheiben mit festgelegten Festigkeitsklassen -
ÄNDERUNG 1 (ISO 898-3:2018/Amd 1:2020)
Caractéristiques mécaniques des fixations en acier au carbone et en acier allié - Partie
3: Rondelles de forme plane de classes de qualité spécifiées - Amendement 1 (ISO 898-
3:2018/Amd 1:2020)
Ta slovenski standard je istoveten z: EN ISO 898-3:2018/A1:2021
ICS:
21.060.30 Podložke, varovalni elementi Washers, locking elements
SIST EN ISO 898-3:2018/A1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 898-3:2018/A1:2021
---------------------- Page: 2 ----------------------
SIST EN ISO 898-3:2018/A1:2021
EN ISO 898-3:2018/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2021
EUROPÄISCHE NORM
ICS 21.060.20
English Version
Mechanical properties of fasteners made of carbon steel
and alloy steel - Part 3: Flat washers with specified
property classes - Amendment 1 (ISO 898-3:2018/Amd
1:2020)
Caractéristiques mécaniques des fixations en acier au Mechanische Eigenschaften von
carbone et en acier allié - Partie 3: Rondelles de forme Verbindungselementen aus Kohlenstoffstahl und
plane de classes de qualité spécifiées - Amendement 1 legiertem Stahl - Teil 3: Flache Scheiben mit
(ISO 898-3:2018/Amd 1:2020) festgelegten Festigkeitsklassen - Änderung 1 (ISO 898-
3:2018/Amd 1:2020)
This amendment A1 modifies the European Standard EN ISO 898-3:2018; it was approved by CEN on 11 January 2021.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 898-3:2018/A1:2021 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 898-3:2018/A1:2021
EN ISO 898-3:2018/A1:2021 (E)
Contents Page
European foreword . 3
2
---------------------- Page: 4 ----------------------
SIST EN ISO 898-3:2018/A1:2021
EN ISO 898-3:2018/A1:2021 (E)
European foreword
This document (EN ISO 898-3:2018/A1:2021) has been prepared by Technical Committee ISO/TC 2
"Fasteners" in collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which
is held by BSI.
This Amendment to the European Standard EN ISO 898-3:2018 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by November 2021,
and conflicting national standards shall be withdrawn at the latest by November 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Ma
...
SLOVENSKI STANDARD
SIST EN ISO 898-3:2018/oprA1:2020
01-april-2020
Mehanske lastnosti veznih elementov, narejenih iz ogljikovega jekla in jeklene
zlitine - 3. del: Ploščate podložke z določenimi razredi trdnosti - Dopolnilo A1 (ISO
898-3:2018/DAM 1:2020)
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat
washers with specified property classes - Amendment 1 (ISO 898-3:2018/DAM 1:2020)
Mechanische Eigenschaften von Verbindungselementen aus Kohlenstoffstahl und
legiertem Stahl - Teil 3: Flache Scheiben mit festgelegten Festigkeitsklassen -
ÄNDERUNG 1 (ISO 898-3:2018/DAM 1:2020)
Caractéristiques mécaniques des fixations en acier au carbone et en acier allié - Partie
3: Rondelles de forme plane de classes de qualité spécifiées - Amendement 1 (ISO 898-
3:2018/DAM 1:2020)
Ta slovenski standard je istoveten z: EN ISO 898-3:2018/prA1
ICS:
21.060.30 Podložke, varovalni elementi Washers, locking elements
SIST EN ISO 898-3:2018/oprA1:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 898-3:2018/oprA1:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 898-3:2018/oprA1:2020
DRAFT AMENDMENT
ISO 898-3:2018/DAM 1
ISO/TC 2 Secretariat: DIN
Voting begins on: Voting terminates on:
2020-02-10 2020-05-04
Mechanical properties of fasteners made of carbon steel
and alloy steel —
Part 3:
Flat washers with specified property classes
AMENDMENT 1
Caractéristiques mécaniques des fixations en acier au carbone et en acier allié —
Partie 3: Rondelles de forme plane de classes de qualité spécifiées
AMENDEMENT 1
ICS: 21.060.20
THIS DOCUMENT IS A DRAFT CIRCULATED
This document is circulated as received from the committee secretariat.
FOR COMMENT AND APPROVAL. IT IS
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
ISO/CEN PARALLEL PROCESSING
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO 898-3:2018/DAM 1:2020(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
©
PROVIDE SUPPORTING DOCUMENTATION. ISO 2020
---------------------- Page: 3 ----------------------
SIST EN ISO 898-3:2018/oprA1:2020
ISO 898-3:2018/DAM 1:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.