iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 898-3:2018/A1:2021

(Amendment)

Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes - Amendment 1 (ISO 898-3:2018/Amd 1:2020)

Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes - Amendment 1 (ISO 898-3:2018/Amd 1:2020)

Mechanische Eigenschaften von Verbindungselementen aus Kohlenstoffstahl und legiertem Stahl - Teil 3: Flache Scheiben mit festgelegten Festigkeitsklassen - Änderung 1 (ISO 898-3:2018/Amd 1:2021)

No scope available

Caractéristiques mécaniques des fixations en acier au carbone et en acier allié - Partie 3: Rondelles de forme plane de classes de qualité spécifiées - Amendement 1 (ISO 898-3:2018/Amd 1:2020)

Mehanske lastnosti veznih elementov, narejenih iz ogljikovega jekla in jeklene zlitine - 3. del: Ploščate podložke z določenimi razredi trdnosti - Dopolnilo A1 (ISO 898-3:2018/Amd 1:2020)

General Information

Status
Published
Publication Date
18-May-2021
Withdrawal Date
29-Nov-2021
ICS
21.060.20 - Nuts
Technical Committee
CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
Drafting Committee
CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
19-May-2021
Completion Date
19-May-2021
Ref Project
SIST EN ISO 898-3:2018/A1:2021 - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes - Amendment 1 (ISO 898-3:2018/Amd 1:2020)

Relations

Amends
EN ISO 898-3:2018 - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes (ISO 898-3:2018)
Effective Date
02-Oct-2019

Buy Standard

EN ISO 898-3:2018/A1:2021EN ISO 898-3:2018/A1:2021
PreviousNext
Amendment
EN ISO 898-3:2018/A1:2021
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 898-3:2018/A1:2021
01-julij-2021
Mehanske lastnosti veznih elementov, narejenih iz ogljikovega jekla in jeklene
zlitine - 3. del: Ploščate podložke z določenimi razredi trdnosti - Dopolnilo A1 (ISO
898-3:2018/Amd 1:2020)
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat
washers with specified property classes - Amendment 1 (ISO 898-3:2018/Amd 1:2020)
Mechanische Eigenschaften von Verbindungselementen aus Kohlenstoffstahl und
legiertem Stahl - Teil 3: Flache Scheiben mit festgelegten Festigkeitsklassen -
ÄNDERUNG 1 (ISO 898-3:2018/Amd 1:2020)
Caractéristiques mécaniques des fixations en acier au carbone et en acier allié - Partie
3: Rondelles de forme plane de classes de qualité spécifiées - Amendement 1 (ISO 898-
3:2018/Amd 1:2020)
Ta slovenski standard je istoveten z: EN ISO 898-3:2018/A1:2021
ICS:
21.060.30 Podložke, varovalni elementi Washers, locking elements
SIST EN ISO 898-3:2018/A1:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 898-3:2018/A1:2021

---------------------- Page: 2 ----------------------
SIST EN ISO 898-3:2018/A1:2021


EN ISO 898-3:2018/A1
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2021
EUROPÄISCHE NORM
ICS 21.060.20
English Version

Mechanical properties of fasteners made of carbon steel
and alloy steel - Part 3: Flat washers with specified
property classes - Amendment 1 (ISO 898-3:2018/Amd
1:2020)
Caractéristiques mécaniques des fixations en acier au Mechanische Eigenschaften von
carbone et en acier allié - Partie 3: Rondelles de forme Verbindungselementen aus Kohlenstoffstahl und
plane de classes de qualité spécifiées - Amendement 1 legiertem Stahl - Teil 3: Flache Scheiben mit
(ISO 898-3:2018/Amd 1:2020) festgelegten Festigkeitsklassen - Änderung 1 (ISO 898-
3:2018/Amd 1:2020)
This amendment A1 modifies the European Standard EN ISO 898-3:2018; it was approved by CEN on 11 January 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 898-3:2018/A1:2021 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 898-3:2018/A1:2021
EN ISO 898-3:2018/A1:2021 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 898-3:2018/A1:2021
EN ISO 898-3:2018/A1:2021 (E)
European foreword
This document (EN ISO 898-3:2018/A1:2021) has been prepared by Technical Committee ISO/TC 2
"Fasteners" in collaboration with Technical Committee CEN/TC 185 “Fasteners” the secretariat of which
is held by BSI.
This Amendment to the European Standard EN ISO 898-3:2018 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by November 2021,
and conflicting national standards shall be withdrawn at the latest by November 2021.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 8675:2023(Main)
Fasteners - Hexagon thin nuts (style 0), with fine pitch thread (ISO 8675:2023)
SIST EN ISO 8675:2023

This document specifies the characteristics of hexagon thin nuts (style 0), in steel and stainless steel, with metric fine pitch thread 8 mm to 64 mm, and with product grades A and B.
Thin nuts used as jam nuts are to be assembled together with a regular or high nut.
WARNING — Thin nuts (style 0) have a reduced loadability compared to regular nuts or high nuts, and are not designed to provide resistance to thread stripping (see ISO 898-2).
If in certain cases other specifications are requested, stainless steel grades and property classes can be selected from ISO 3506-2.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4035:2023(Main)
Fasteners - Hexagon thin nuts (style 0) (ISO 4035:2023)
SIST EN ISO 4035:2023

This document specifies the characteristics of hexagon thin nuts (style 0), in steel and stainless steel, with metric coarse pitch thread M1,6 to M64, and with product grades A and B.
Thin nuts used as jam nuts are to be assembled together with a regular or high nut.
WARNING — Thin nuts (style 0) have a reduced loadability compared to regular nuts or high nuts, and are not designed to provide resistance to thread stripping (see ISO 898-2).
If in certain cases other specifications are requested, stainless steel grades and property classes can be selected from ISO 3506-2.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8673:2023(Main)
Fasteners - Hexagon regular nuts (style 1), with fine pitch thread (ISO 8673:2023)
SIST EN ISO 8673:2023

This document specifies the characteristics of hexagon regular nuts (style 1), in steel and stainless steel, with metric fine pitch thread 8 mm to 39 mm, and with product grades A and B.
NOTE       For nuts with sizes D > 39 mm, see Annex A.
If in certain cases other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-2 or ISO 3506-2.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 8674:2023(Main)
Fasteners - Hexagon high nuts (style 2), with fine pitch thread (ISO 8674:2023)
SIST EN ISO 8674:2023

This document specifies the characteristics of hexagon high nuts (style 2), in steel and stainless steel, with metric fine pitch thread 8 mm to 39 mm, and with product grades A and B.
If in certain cases other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-2 or ISO 3506-2.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4033:2023(Main)
Fasteners - Hexagon high nuts (style 2) (ISO 4033:2023)
SIST EN ISO 4033:2023

This document specifies the characteristics of hexagon high nuts (style 2), in steel and stainless steel, with metric coarse pitch thread M5 to M39, and with product grades A and B.
If in certain cases other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-2 or ISO 3506-2.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 4032:2023(Main)
Fasteners - Hexagon regular nuts (style 1) (ISO 4032:2023)
SIST EN ISO 4032:2023

This document specifies the characteristics of hexagon regular nuts (style 1), in steel and stainless steel, with metric coarse pitch thread M5 to M39, and with product grades A and B.
NOTE            For nuts with sizes D < M5 and D > M39, see Annex A.
If in certain cases other specifications are requested, property classes and stainless steel grades can be selected from ISO 898-2 or ISO 3506-2.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 898-2:2022(Main)
Fasteners - Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes (ISO 898-2:2022)
SIST EN ISO 898-2:2022

This document specifies the mechanical and physical properties of nuts made of non-alloy steel or alloy steel, when tested at the ambient temperature range of 10 °C to 35 °C.
This document applies to nuts:
—    with ISO metric thread (see ISO 68-1),
—    with diameter/pitch combinations according to ISO 261 and ISO 262,
—    with coarse pitch thread M5 to M39, and fine pitch thread M8×1 to M39×3,
—    with thread tolerances according to ISO 965-1, ISO 965-2 or ISO 965-5,
—    with specified property classes 04, 05, 5, 6, 8, 10 and 12 including proof load,
—    of three different nut styles (see 5.1): regular nuts (style 1), high nuts (style 2) and thin nuts (style 0),
—    with a minimum outside diameter or width across flats s ≥ 1,45D,
—    able to mate with bolts, screws and studs with property classes in accordance with ISO 898-1 (see Annex B), and
—    intended to be used in applications ranging from –50 °C to +150 °C, or up to +300 °C.
WARNING — Nuts conforming to the requirements of this document are tested at the ambient temperature range of 10 °C to 35 °C and are used in applications ranging from –50 °C to +150 °C; however, these nuts are also used outside this range and up to +300 °C for specific applications. It is possible that they do not retain the specified mechanical and physical properties at lower and/or elevated temperatures. Therefore, it is the responsibility of the user to determine the appropriate choices based on the service environment conditions of the assembly (see also 7.1).
For additional specifications applicable to hot dip galvanized nuts, see ISO 10684.
For nuts designed for particular applications, see ISO/TR 16224.
This document does not specify requirements for functional properties such as:
—    prevailing torque properties (see ISO 2320),
—    torque/clamp force properties (see ISO 16047 for test method),
—    weldability, or
—    corrosion resistance.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3506-2:2020(Main)
Fasteners - Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts with specified grades and property classes (ISO 3506-2:2020)
SIST EN ISO 3506-2:2020

This document specifies the mechanical and physical properties of nuts, with coarse pitch thread and fine pitch thread, made of corrosion-resistant stainless steels, when tested at the ambient temperature range of 10 °C to 35 °C. It specifies property classes in relation to austenitic, martensitic, ferritic and duplex (austenitic-ferritic) steel grades for nuts.
ISO 3506‑6 provides general rules and additional technical information on suitable stainless steels and their properties.
Nuts conforming to the requirements of this document are evaluated at the ambient temperature specified in paragraph 1. It is possible that they do not retain the specified mechanical and physical properties at elevated and/or lower temperatures.
NOTE 1  Fasteners conforming to the requirements of this document are used without restriction in applications ranging from ?20 °C to +150 °C; however, fasteners conforming to this document are also used for applications outside this range down to ?196 °C and up to +300 °C. For more details, see ISO 3506-6.
Outside the temperature range of ?20 °C to +150 °C, it is the responsibility of the user to determine the appropriate choice for a given application, in consultation with an experienced fastener metallurgist and by taking into account e.g. stainless steel composition, duration of exposure at elevated or low temperature, the effect of the temperature on the fastener mechanical properties and clamped parts, and the corrosive service environment of the bolted joint.
NOTE 2  ISO 3506‑5[1] is developed in order to assist in the selection of appropriate stainless steel grades and property classes intended for use at temperatures up to +800 °C.
This document applies to nuts:
—     with ISO metric thread in accordance with ISO 68‑1,
—     with diameter/pitch combinations in accordance with ISO 261 and ISO 262,
—     with coarse pitch thread M5 to M39, and fine pitch thread M8×1 to M39×3,
—     with thread tolerances in accordance with ISO 965‑1 and ISO 965‑2,
—     with specified property classes, including proof load,
—     with different nut styles: thin nuts, regular nuts and high nuts,
—     with a minimum nut height m ≥ 0,45D,
—     with a minimum outside diameter or width across flats s ≥ 1,45D (see Annex A),
—     of any shape, and
—     able to mate with bolts, screws and studs with property classes in accordance with ISO 3506‑1.
Stainless steel grades and property classes can be used for sizes outside the diameter limits of this document (i.e. for D < 5 mm or D > 39 mm), provided that all applicable chemical, mechanical and physical requirements are met.
This document does not specify requirements for functional properties such as:
—     torque/clamp force properties,
—     prevailing torque properties, or
—     weldability.
[1] Under preparation.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 898-3:2018(Main)
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 3: Flat washers with specified property classes (ISO 898-3:2018)
SIST EN ISO 898-3:2018

This document specifies mechanical and physical properties of flat washers, designed to be used in bolted joints in combination with bolts, screws, studs and nuts with a specified property class in accordance with ISO 898‑1 and ISO 898‑2.
NOTE 1    These types of washers can also be used with other fasteners such as screws forming their own mating thread.
Washers that conform to the requirements of this document are evaluated at an ambient temperature range of 10 °C to 35 °C. They might not retain the specified mechanical and physical properties at elevated temperatures and/or lower temperatures.
NOTE 2    Washers conforming to the requirements of this document are used in applications ranging from −50 °C to +150 °C. Users are advised to consult an experienced fastener expert for temperatures outside this range and up to a maximum temperature of +300 °C when determining appropriate choices, or for critical applications.
This document is applicable to the following flat captive and non-captive washers made of carbon steel or alloy steel, with thickness from 0,2 mm to 12 mm:
—          plain washers (with or without knurls, ribs or chamfers);
—          square washers;
—          square hole washers;
—          shaped plates.
It does not specify requirements for the following properties:
—          corrosion resistance;
—          weldability.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 2320:2015(Main)
Fasteners - Prevailing torque steel nuts - Functional properties (ISO 2320:2015)
SIST EN ISO 2320:2016

ISO 2320:2015 specifies the functional properties for prevailing torque steel nuts when tested at an ambient temperature range of +10 °C to +35 °C. It includes a combined test method to determine the prevailing torque properties and the torque/clamp force properties at the same time.
It applies to prevailing torque all metal type nuts and prevailing torque non-metallic insert type nuts:
-      with triangular ISO thread in accordance with ISO 68‑1;
-      with diameter/pitch combination in accordance with ISO 261 and ISO 262;
-      with coarse pitch thread M5 to M39 or with fine pitch thread M8 × 1 to M39 × 3;
-      with thread tolerances in accordance with ISO 965-2;
-      with mechanical properties in accordance with ISO 898‑2;
Prevailing torque values specified in this standard are based on laboratory test conditions.
NOTE 1       Actual prevailing torques in practical application can vary.
NOTE 2       All metal type nuts conforming to the requirements of this International Standard are used in applications ranging from −50 °C to +150 °C.
NOTE 3       Non-metallic insert type nuts conforming to the requirements of this International Standard are used in applications ranging from −50 °C to +120 °C.
WARNING ? Temperatures outside the ambient temperature range can influence the functional properties (torque/clamp force and prevailing torque properties), see Annex A.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day