SIST EN 3372-007:2009
(Main)Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous - Part 007: Protective cover for plug – Product standard
Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous - Part 007: Protective cover for plug – Product standard
This standard specifies the characteristics of protective covers for plugs in the family of circular electrical connectors coupled by bayonet ring.
It applies to class defined in Table 2.
For plugs associated with these protective covers, see EN 3372 008.
Luft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschützt, Bajonettkupplung, Betriebstemperatur - 65 °C bis 175 °C oder 200 °C konstant - Teil 007: Schutzkappe für freien Steckverbinder - Produktnorm
Diese Norm legt die Eigenschaften von Schutzkappen für freie Steckverbinder in der Familie von elektrischen Rundsteckverbindern fest, die mit einem Bajonettring gekuppelt werden.
Diese Norm gilt für die in Tabelle 2 festgelegten Klassen.
Freie Steckverbinder in Verbindung mit diesen Schutzkappen siehe EN 3372 008.
Série aérospatiale - Connecteurs électriques circulaires scoop-proof à accouplement par baïonnettes température d'utilisation - 65 °C à 175 °C ou 200 °C continu - Partie 007 : Bouchon de vol pour fiche - Norme de produit
Aeronavtika - Konektorji, električni, okrogli, zaščiteni kontakt, z bajonetnim sklapljanjem, stalna delovna temperatura med -65 °C in 175 °C ali 200 °C - 007. del: Zaščitna kapa za vtič - Standard za proizvod
General Information
- Status
- Published
- Publication Date
- 10-Jun-2009
- Technical Committee
- I13 - Imaginarni 13
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 20-May-2009
- Due Date
- 25-Jul-2009
- Completion Date
- 11-Jun-2009
Overview
EN 3372-007:2007 is a CEN product standard in the Aerospace series that specifies the characteristics of protective covers for plugs used with circular electrical connectors that are scoop‑proof and use a bayonet coupling. The standard covers protective covers intended for connector plugs operating in the temperature range −65 °C to 175 °C or 200 °C continuous, and defines dimensional, material, marking and designation requirements for these covers.
Key topics and technical requirements
- Scope and purpose
- Defines the design and product characteristics of protective covers for plug‑type members of the EN 3372 connector family.
- Applies to classes given in the standard’s Table 2 (material/surface and temperature classes).
- Dimensions and mass
- Dimensions and maximum mass are specified by housing size in the standard (refer to Figure 1 and Table 1 for attachment length and mass values).
- Materials and surface treatment
- Two classes are defined in Table 2:
- Class W: cadmium‑plated aluminium alloy, olive drab finish, 500 h salt mist resistance, max continuous temperature 175 °C.
- Class F: nickel‑plated aluminium alloy, 48 h salt mist resistance, max continuous temperature 200 °C.
- Two classes are defined in Table 2:
- Design and terminations
- Protective covers can be supplied with chain (type C) or with cord (type D) for retention to equipment.
- Positioning of interfacial seals and compatibility rules follow EN 3372‑001 and EN 3372‑002.
- Designation and marking
- The standard gives a designation format (example: “COVER, ELECTRICAL CONNECTOR EN 3372 W 4 C 10”) and mandates marking that includes the identity block, date of manufacture (year/week), and manufacturer’s name or trademark.
- Reference requirements
- Technical specification and performance/combinations are governed by related parts of the EN 3372 series (EN 3372‑001, EN 3372‑002, EN 3372‑008).
Applications and users
Who benefits from EN 3372-007:2007:
- Aerospace OEMs and suppliers specifying connector accessories for aircraft and spacecraft electrical systems.
- Connector designers and harness engineers ensuring mechanical protection of plugs during storage, maintenance or while mated/unmated.
- Procurement, quality and compliance teams requiring standardized product identification and traceability.
- Maintenance, repair and overhaul (MRO) personnel selecting protective covers compatible with EN 3372 plug families.
Typical uses:
- Protection of plug contacts during handling, installation and storage.
- Retention solutions (chain/cord) to prevent loss or contamination.
- Specifying replacement covers meeting corrosion and temperature endurance requirements.
Related standards
- EN 3372-001 - Technical specification for the connector family
- EN 3372-002 - Performance and contact arrangements; compatibility rules
- EN 3372-008 - Free plug product standard (associated plug designs)
Keywords: EN 3372-007:2007, protective cover for plug, aerospace connectors, circular electrical connectors, bayonet coupling, scoop‑proof, connector protective cover, connector accessory standard.
Frequently Asked Questions
SIST EN 3372-007:2009 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous - Part 007: Protective cover for plug – Product standard". This standard covers: This standard specifies the characteristics of protective covers for plugs in the family of circular electrical connectors coupled by bayonet ring. It applies to class defined in Table 2. For plugs associated with these protective covers, see EN 3372 008.
This standard specifies the characteristics of protective covers for plugs in the family of circular electrical connectors coupled by bayonet ring. It applies to class defined in Table 2. For plugs associated with these protective covers, see EN 3372 008.
SIST EN 3372-007:2009 is classified under the following ICS (International Classification for Standards) categories: 49.060 - Aerospace electric equipment and systems. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 3372-007:2009 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Luft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschützt, Bajonettkupplung, Betriebstemperatur - 65 °C bis 175 °C oder 200 °C konstant - Teil 007: Schutzkappe für freien Steckverbinder - ProduktnormSérie aérospatiale - Connecteurs électriques circulaires scoop-proof à accouplement par baïonnettes température d'utilisation - 65 °C à 175 °C ou 200 °C continu - Partie 007 : Bouchon de vol pour fiche - Norme de produitAerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous - Part 007: Protective cover for plug – Product standard49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3372-007:2007SIST EN 3372-007:2009en,de01-julij-2009SIST EN 3372-007:2009SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 3372-007
July 2007 ICS 49.060 English Version
Aerospace series - Connectors, electrical, circular, medium and high contact density, scoop-proof with bayonet coupling, operating temperatures - 65 °C to 175 °C or 200 °C continuous -Part 007: Protective cover for plug - Product standard
Série aérospatiale - Connecteurs électriques circulaires scoop-proof à accouplement par baïonnettes, température d'utilisation - 65 °C à 175 °C ou 200 °C continu - Partie 007 : Bouchon de vol pour fiche - Norme de produit
Luft- und Raumfahrt - Elektrische Rundsteckverbinder, kontaktgeschützt, Bajonettkupplung, Betriebstemperatur - 65 °C bis 175 °C oder 200 °C konstant - Teil 007: Schutzkappe für freien Steckverbinder - Produktnorm This European Standard was approved by CEN on 24 June 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2007 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 3372-007:2007: ESIST EN 3372-007:2009
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...