SIST EN 3475-410:2004
(Main)Aerospace series - Cables, electrical, aircraft use - Test methods - Part 410: Thermal endurance
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 410: Thermal endurance
This standard specifies a method of measuring the thermal endurance of a finished cable.
It shall be used together with EN 3475-100 and ASTM-D-3032-86 paragraph 14 - Thermal endurance.
Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrt, Verwendung - Prüfverfahren - Teil 410: Thermische Gebrauchsdauer
Diese Norm legt ein Verfahren zur Prüfung der thermischen Gebrauchsdauer einer fertigen Leitung fest.
Sie ist in Verbindung mit EN 3475-100 und ASTM-D-3032-86, Abschnitt 14 - Thermische Gebrauchsdauer - anzuwenden.
Série aérospatiale - Câbles électriques a usage aéronautique - Méthodes d'essai - Partie 410: Endurance thermique
Cette norme définit une méthode d'essai d'endurance thermique d'un câble terminé.
Elle doit être utilisée conjointement avec EN 3475-100 et ASTM-D-3032-86 paragraphe 14 - Endurance thermique.
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 410: Thermal endurance
General Information
- Status
- Published
- Publication Date
- 30-Apr-2004
- Technical Committee
- I08 - Imaginarni 08
- Current Stage
- 6060 - National Implementation/Publication (Adopted Project)
- Start Date
- 01-May-2004
- Due Date
- 01-May-2004
- Completion Date
- 01-May-2004
Overview
EN 3475-410:2002 - Aerospace series - Cables, electrical, aircraft use - Test methods - Part 410: Thermal endurance defines a test method for measuring the thermal endurance (thermal aging) of a finished aircraft cable. It is a procedural standard: it prescribes how to perform the thermal endurance test rather than specifying numerical temperature or time limits. The standard is intended for use together with EN 3475-100 (general test methods) and ASTM D3032‑86 paragraph 14 (thermal endurance method).
Key topics and requirements
- Scope: Applies to finished electrical cables intended for aircraft use; focuses exclusively on thermal endurance testing.
- Test method: The procedure follows paragraph 14 of ASTM D3032‑86; EN 3475-410 provides the European/AECMA implementation for aerospace cables.
- Parameter selection: The required lifetime (test duration) and test temperature are not fixed in EN 3475-410 - they must be specified in the applicable product standard for the cable under test.
- Normative references: EN 3475-100 (general test methods for aerospace cables) and ASTM D3032‑86 are normative and must be used in conjunction.
- Applicability: For assessment of material and finished-cable performance under defined thermal-aging conditions; supports verification of insulation/jacket materials and construction integrity over expected service life.
Practical applications
- Cable qualification and acceptance testing for aircraft wiring systems.
- Material selection and validation for insulation and jacket compounds to ensure resistance to long-term elevated temperature exposure.
- Supplier and OEM quality assurance programs to demonstrate thermal durability according to aerospace requirements.
- Maintenance, overhaul and repair engineering to support decisions on wire replacement intervals and life-limited components.
- Test laboratories and certification bodies performing standardized thermal-aging tests for procurement specifications and airworthiness substantiation.
Who should use this standard
- Aerospace cable manufacturers and component suppliers
- Aircraft OEMs and systems integrators
- Test laboratories specializing in electrical/electromechanical aviation components
- Quality, procurement and certification engineers in aerospace and defense
- Maintenance, repair and overhaul (MRO) organizations assessing wire life
Related standards
- EN 3475-100 - General test methods for aerospace electrical cables
- ASTM D3032‑86 - Standard methods of testing hook‑up wire insulation (see paragraph 14 for thermal endurance)
- Other parts of the EN 3475 series covering electrical cable test methods and performance
Keywords: EN 3475-410, thermal endurance, aircraft cables, aerospace cable testing, cable thermal aging, ASTM D3032, EN 3475-100, electrical aircraft cables.
Frequently Asked Questions
SIST EN 3475-410:2004 is a standard published by the Slovenian Institute for Standardization (SIST). Its full title is "Aerospace series - Cables, electrical, aircraft use - Test methods - Part 410: Thermal endurance". This standard covers: This standard specifies a method of measuring the thermal endurance of a finished cable. It shall be used together with EN 3475-100 and ASTM-D-3032-86 paragraph 14 - Thermal endurance.
This standard specifies a method of measuring the thermal endurance of a finished cable. It shall be used together with EN 3475-100 and ASTM-D-3032-86 paragraph 14 - Thermal endurance.
SIST EN 3475-410:2004 is classified under the following ICS (International Classification for Standards) categories: 49.060 - Aerospace electric equipment and systems. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 3475-410:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Cables, electrical, aircraft use - Test methods - Part 410: Thermal enduranceLuft- und Raumfahrt - Elektrische Leitungen für Luftfahrt, Verwendung - Prüfverfahren - Teil 410: Thermische GebrauchsdauerSérie aérospatiale - Câbles électriques a usage aéronautique - Méthodes d'essai - Partie 410: Endurance thermiqueAerospace series - Cables, electrical, aircraft use - Test methods - Part 410: Thermal endurance49.060Aerospace electric equipment and systemsICS:Ta slovenski standard je istoveten z:EN 3475-410:2002SIST EN 3475-410:2004en01-maj-2004SIST EN 3475-410:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3475-410January 2002ICS 49.060English versionAerospace series - Cables, electrical, aircraft use - Testmethods - Part 410: Thermal enduranceSérie aérospatiale - Câbles électriques à usageaéronautique - Méthodes d'essai - Partie 410: EndurancethermiqueLuft- und Raumfahrt - Elektrische Leitungen für Luftfahrt,Verwendung - Prüfverfahren - Teil 410: ThermischeGebrauchsdauerThis European Standard was approved by CEN on 6 August 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploita
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...