SIST EN 1090-1:2009/FprA1:2011
(Amendment)Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components
To amend the technical content of EN 1090-1 on issues agreed within the TC
Ausführung von Stahltragwerken und Aluminiumtragwerken - Teil 1: Konformitätsnachweisverfahren für tragende Bauteile
Exécution des structures en acier et des structures en aluminium — Partie 1: Exigences pour l'évaluation de la conformité des éléments structuraux
Izvedba jeklenih konstrukcij in aluminijastih konstrukcij - 1. del: Zahteve za ugotavljanje skladnosti sestavnih delov konstrukcij
General Information
- Status
- Not Published
- Public Enquiry End Date
- 01-Sep-2011
- Technical Committee
- KON - Structures
- Current Stage
- 5520 - Unique Acceptance Procedure (UAP) (Adopted Project)
- Start Date
- 06-Jun-2011
- Due Date
- 24-Oct-2011
- Completion Date
- 01-Dec-2011
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 18-Jan-2023
- Effective Date
- 30-Oct-2010
Overview
EN 1090-1:2009/FprA1 (CEN) is a draft amendment to EN 1090-1:2009 that updates the requirements for conformity assessment of structural components made from steel and aluminium. Prepared by CEN/TC 135 and issued as FprA1 (June 2011), the amendment explicitly incorporates deformation at the serviceability limit state (SLS) into the conformity assessment framework and adjusts related tables and ZA (CE-marking) provisions. The change ensures that both load-bearing capacity and serviceability deformations are covered when declaring performance of structural components.
Key topics and requirements
- Addition of SLS deformation requirement
- Clause 4.5.1 is amended to include “deformation at serviceability limit state” alongside load-bearing capacity. A new sub-clause 4.5.5 defines that deformations calculated using the appropriate combination of actions must be within limits specified in the design assumptions and/or relevant European Standards (including National Determined Parameters/NDPs).
- Conformity assessment methods
- Table 1 (Clause 6.2) is updated to include Deformation at SLS as a characteristic that can be assessed by calculation to the relevant part of EN 1990/EN 1993/EN 1994/EN 1999 or by structural testing/European Technical Specification.
- Structural characteristics scope
- Table 2 (Clause 6.3.7) now lists structural characteristics governed by design as: load-bearing capacity, deformation at SLS, fatigue strength and resistance to fire.
- CE-marking / Declaration adjustments (ZA clauses)
- ZA.1, ZA.3.3 and ZA.3.5 are modified so deformation at SLS is included in the declaration routes (e.g., NPD entries and references to design calculations and accompanying design brief).
Practical applications and users
Who uses this standard:
- Structural engineers and designers checking component conformity for both ultimate limit state (ULS) and serviceability (SLS)
- Fabricators and manufacturers of steel and aluminium structural components preparing declarations of performance
- Notified/conformity assessment bodies and testing laboratories verifying component performance
- Specifiers, contractors and authorities overseeing CE marking and regulatory compliance
Typical applications:
- Demonstrating that component deformations meet design limits for buildings and civil structures
- Producing conformity documentation for CE marking and construction product regulation compliance
- Deciding whether assessment should be by calculation (EN 1990/EN 1993/EN 1994/EN 1999) or by structural testing
Related standards
- EN 1090-1:2009 (base standard)
- EN 1990 (Basis of structural design)
- EN 1993 (Steel structures)
- EN 1994 (Composite steel and concrete structures)
- EN 1999 (Aluminium structures)
Keywords: EN 1090-1, EN 1090, conformity assessment, execution of steel structures, aluminium structures, deformation at serviceability limit state, CE marking, EN 1990, EN 1993.
Frequently Asked Questions
SIST EN 1090-1:2009/FprA1:2011 is a draft published by the Slovenian Institute for Standardization (SIST). Its full title is "Execution of steel structures and aluminium structures - Part 1: Requirements for conformity assessment of structural components". This standard covers: To amend the technical content of EN 1090-1 on issues agreed within the TC
To amend the technical content of EN 1090-1 on issues agreed within the TC
SIST EN 1090-1:2009/FprA1:2011 is classified under the following ICS (International Classification for Standards) categories: 91.080.13 - Steel structures; 91.080.17 - Aluminium structures. The ICS classification helps identify the subject area and facilitates finding related standards.
SIST EN 1090-1:2009/FprA1:2011 has the following relationships with other standards: It is inter standard links to SIST EN 1090-1:2009+A1:2012, SIST EN 1090-1:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
SIST EN 1090-1:2009/FprA1:2011 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/120. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
SIST EN 1090-1:2009/FprA1:2011 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2011
Izvedba jeklenih konstrukcij in aluminijastih konstrukcij - 1. del: Zahteve za
ugotavljanje skladnosti sestavnih delov konstrukcij
Execution of steel structures and aluminium structures - Part 1: Requirements for
conformity assessment of structural components
Ausführung von Stahltragwerken und Aluminiumtragwerken - Teil 1:
Konformitätsnachweisverfahren für tragende Bauteile
Exécution des structures en acier et des structures en aluminium — Partie 1: Exigences
pour l'évaluation de la conformité des éléments structuraux
Ta slovenski standard je istoveten z: EN 1090-1:2009/FprA1
ICS:
91.080.10 Kovinske konstrukcije Metal structures
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
FINAL DRAFT
EN 1090-1:2009
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
June 2011
ICS 91.080.10
English Version
Execution of steel structures and aluminium structures - Part 1:
Requirements for conformity assessment of structural
components
Exécution des structures en acier et des structures en Ausführung von Stahltragwerken und Aluminiumtragwerken
aluminium - Partie 1: Exigences pour l'évaluation de la - Teil 1: Konformitätsnachweisverfahren für tragende
conformité des éléments structuraux Bauteile
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 135.
This draft amendment A1, if approved, will modify the European Standard EN 1090-1:2009. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 1090-1:2009/FprA1:2011: E
worldwide for CEN national Members.
Contents Page
Foreword .3
1 Modifications to 4.5.1 .4
2 Addition of 4.5.5 .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...